WAE-210PA
21dBi Outdoor Patch Antenna
Weather Resistant Antenna
he WAE-210PA is a 21dBi wireless antenna
constructed of weather resistant material. The
directional (horizontal 15degree, vertical 20
T
degree) characteristic allow the antenna to focus its
signal for longer distance. It is very suitable for
outdoor point-to-point bridge use. The antenna is
equipped with female N-Type connector for use with
RG-213 cable. The new color and texture blends your
antenna into your building outer wall.
Focus AP's signal for longer distance
Wireless signal loses a majority of its strength when
penetrating a concrete wall. Therefore, indoor AP has
difficulty to makes its signal available outside of the
building. The WAE-210PA allows your AP's antenna to
extend outside, mounting on a rooftop or outside wall.
Furthermore, patch antenna focus the antenna signal
in a particular direction to allow secure signal
transmission over longer distance. This is essential for
outdoor point-to-pint bridge use. The antenna comes
with N-Type connector to connect with outdoor AP. To
connect with indoor AP's reversed-SMA connector, a
RG316-SNF adapter cable and RG213-SNN cable is
required.
H-Plane (Horizontal)
Field Pattern
E-Plane (Vertical)
Specification
Connector type
· Female N-Type
Recommended adapter and cable
RG-213-SNN
· cable required for connection
with outdoor AP
RG316-SNM
· cable required for short
connection(30cm) with indoor AP
RG316-SNF SG213-SNN
· and required for
longer distance(>30cm) with indoor AP
Frequency range
· 2.1~2.6GHz
Impedance
· 50 Ohms nominal
VSWR
· 1.5 or smaller
Gain:
· 21dBi
Ordering Information
WAE-210PA 21dBi Outdoor Patch Antenna
Radiation
· Directinoa
· 15 degree horizontal, 20 degree vertical
Polarization
· Vertical
Material
· ABS
Temperature:
· Operating: -20 to +65 degree C
· Storage: -30 to +75 degree C
Dimensions
· 370 x 370 x 30 mm
· 1.3kg