AirLive POE-48PB v2 USER MANUAL

POE-48PBv2

Data In

Data &

Power Out

48V All-in-One PoE Power Adapter
with DC Injector

48V PoE Adapter with DC Injector
PoE kit for PoE AP and CPE
Up to 100 Meter Cable Length
All-in-One Design, DC Injector Included
Recommended for BC-5010, FE-501DM, FE-

501OD, BU-3028, AirMax4GW

he POE-48PBv2 is a 48V PoE adapter with DC
injector. It takes the electricity from the Power

T

Adapter and the data from the Ethernet network,
then combined them into a signal that can be
transmitted through the UTP/STP cable. Combination
of POE-48PBv2 and PoE devices, such as PoE AP,
PoE IPCam, you can easily deploy PoE network
environment.

PoE

48V

DC

Injector

Plug &

Play

Wireless AP

PoE Port

POE Cable

DATA + Power

Specications

Hardware

- IEEE802.3, IEEE802.3u Standard Compliance

- Power Output is 48V, 0.4A

- Power Consumption is 20W

Data In

POE-48PBv2

Data &
Power Out

Power

LAN

Data

- Mix Data and Power into RJ-45 Port

Power output

- 48V, 0.4A Power pin: 4,5(V+), 7,8(V-)

9F, No.98, Min-Chuan Rd., Hsin-Tien Dist., New Taipei City 231, TAIWAN

Power input

- AC 100~240V, 50~60HZ

Emission

- CE, FCC

Data output

- Data pin: 1,2,3,6

Efficiency

- 85% minimum at dc output full loading

Product Weight (g)

- 96g

Dimensions( L x W x H (mm) )

- 80 x 70 x 45

RIPPLE and NOISE

- Low frequency ripple(<100KHz) <= 150mVp-p

Temperature

- Operating: 0°C - 40°C

- Storage: -10°C - 80°C

Humidity

- Operating: 10 to 95%

- Storage: 10 to 95%

Ordering Information:

AirLive POE-48PBv2 48V All-in-One PoE Power Adapter with DC Injector

9F, No.98, Min-Chuan Rd., Hsin-Tien Dist., New Taipei City 231, TAIWAN