Airlive LIVE-FSH8SB, LIVE-FSH8R, LIVE-FSH16T PLUS, LIVE-FSH5R, LIVE-GSH5T Quick Set Up Guide

...

LLiivvee SSeerriieess SSwwiittcchheess

Live-FSH5PS, Live-FSH8PS, Live-FSH5R,

Live-FSH8SB, Live-FSH8R, Live-FSH16T+,

Live-GSH5T, Live-GSH8T

English ● ● ●

Español ● ● ●

Deutsch ● ● ●

Français ● ● ●

한국어 ● ● ●

Port Layout

English

Note: The case and port layouts differ between each model of Live switches.

Station Ports

(5, 8, or 16 ports depending on models)

Power Connector

Installation Steps

Remove the switch and accessories from the package

11.

Live-FSH8R, 16T+, Live-GSH5T, and Live-GSH8T only

22.

Attach the rubber pads to the bottom of the switch

Live-FSH16T+v2 only

33.

If you want to use the VLAN function, please select VLAN mode. Please refer to “VLAN Selector” section for details

Connect power to the switch, make sure “Power” LED is on.

44.

Connect devices to the switch:

55.

Connect PCs, router, print servers, AP, or other network devices to the



station ports. Live-GSH5T/8T only Connect Server with Gigabit card or another



Gigabit switch to the Gigabit Port Use twisted pair cable, please view “cabling requirement section for



details. Check whether the “Link/Act” light is on. If not, please make sure the



other device or the PC’s power is on Please do not form a network loop, refer to the “Connectivity Rules”



section for details. The maximum cabling distance is 100 meter



Please refer to the user’s manual in the CD for detail instructions.

66.

All Live switches feature Auto-MDI/MDI-X function. It allows users to use strai

ht-thru cable for all type of connections.

Live Series Switches

English

LED & Cabling Rules

LED indicator

Color Status Meaning

All Models

Power ● Green ON

OFF

Link/Act ● Green ON

Blinking OFF

FDX/Col ● Yellow ON

OFF Blinking

100M ● RED ON

OFF

Power ON Power OFF

Connection is made Transmitting/Receiving No connection is made

Full Duplex Half Duplex Collisions (in half duplex)

100 Mbps Connection 10 Mbps Connection

Live-FSH16T+

VLAN ● Yellow ON VLAN Mode On

VLAN ● Yellow OFF VLAN Mode OFF

Live-GSH5T/ Live-GSH8T

z 1000/ACT z 100/ACT z 10/ACT

● Green

ON ON ON Blinking

FDX 1000Mbps Connection FDX 100Mbps Connection FDX 10Mbps Connection Transmitting/Receiving

English

Port Type

Cable to use 100Mbp :CAT5 UTP/STP

To PC Straight-through

To hub/switch Straight-through

Maximum distance 100m 100m

Live Series Switches

10/100 Ports

10Mbps: Cat 3, 4, 5 UTP/STP

Gigabit Port

(Live GSH5T/8T)

10/100/1000Mbps Cat 5 UTP/STP

Straight-through

English

VLAN Selector (Live FSH16T+ only)

English

For normal operation, please make sure your VLAN switch is in “OFF” Position

Live-FSH16T+ is equipped with VLAN selector switch in the back panel. When activated, each port will be in its own VLAN group with 2 sharing ports. Ports in different VLAN groups cannot see each other. However, everyone can see the sharing port. Please make sure your VLAN selector is in “OFF” position if you are not using the VLAN function.

 ON: Every port in its own VLAN group sharing Port 8 and 16  OFF: VLAN function off, the switch operates in normal mode

Connectivity Rules

Please avoid forming a network loop (see the



diagram on the right) when connecting the cables. A network loop can cause the network to shutdown..

The maximum cable distance is 100 meter



Always check the LED lights for trouble shooting



Computers and network devices must be in the



same IP subnet in order to see each other. For example, 198.168.0.1 can not see 192.192.1.1 for Class C subnet. You can find out the computer’s IP address by typing “IPCONFIG” in WinNT/2000/XP’s command line. For Win9x, run “WINIPCFG”.

Avoid operating device in 10Mbps full duplex mode



if the device does not have auto-negotiation function.

Live Series Switches

English

Disposición

Nota: La carcasa y la disposición de puertos varían dependiendo del modelo de Switch de la familia Live.

Puertos de dispositivo

(5, 8, ó 16 puertos dependiendo del modelo)

Español

Conector de

Alimentación

Instalación paso a paso

Saque del envoltorio el Switch y sus accesorios

11.

Live-FSH8R, 16T+, y Live-GSH5T/8T solo

22.

Pegue las patas de goma en la parte inferior del switch

33.

Live-FSH16T+ solo

44.

Si desea utilizar la función VLAN selecciona el modo con el botón. Para mas

55.

información lea la sección “Botón VLAN“.

Conecte la fuente de alimentación al Switch y asegúrese de que el Led

66.

“Power” está encendido.

Conecte dispositivos al switch:

77.

Por favor léase la sección del manual de usuario que contiene el CD para

88.

Conecte PCs, router, print servers, AP, u otros dispositivos de red a los



puertos de dispositivo.

Live-GSH5T/8T solo Conecte un servidor con tarjeta Gigabit u otro



switch Gigabit al puerto indicado como Gigabit Use cable par trenzado, revise la sección.”Requerimientos de cable”.



Chequee cuáles de los leds de “Link/Act” están encendidos. Si no lo



están revise que el dispositivo al que conecta esté encendido. Tenga cuidado de realizar anillos de red, lea la sección de “Reglas de



Conectividad” para mas detalles. Recuerde que la distancia máxima de cable son 100 metros.



recibir instrucciones mas detalladas.

Live Series Switches

Español

LED & Requerimientos de Cable

LED Color Estado Significado

Todos los modelos

Power ● Verde Encendido

Link/Act ● Verde Encendido

Español

FDX/Col ● Amarillo Encendido

100M ● Rojo Encendido

Live-FSH16T+

VLAN ON ● Amarillo Encendido Modo VLANs activo

VLAN OFF ● Amarillo Apagado No VLANs activo

Apagado

Parpadeando Apagado

Apagado Parpadeando

Apagado

Recibe Alimentación No recibe alimentación

Conexión habilitada Transmite/Recibe Conexión deshabilitada

Full Duplex Half Duplex Colisiones (en half duplex)

Conexión 100 Mbps Conexión 10 Mbps

Live-GSH5T/8T

Puerto Giga

1000/ACT 100/ACT 10/ACT

Todos los swicth de la gama Live disponen de la función Auto MDI/MDI-X. Esto permite utilizar cable según normativa estándar para todas las conexiones. ( Ver gráfico adjunto

● Verde

● Amarillo

Encendido Encendido Encendido Parpadeando Encendido

Conexión 1000Mbps Conexión 100Mbps Conexión 10Mbps Transmite/Recibe Half Duplex

Tipo de puerto

Cable necesario 100Mbps: CAT5 UTP/STP

Distancia Máxima 100m 100m

Puertos Estándar

10Mbps:

Cat 3, 4, 5 UTP/STP

Puerto Gigabit

(Live-GSH5T/8T)

10/100/1000Mbps

Cat 5 UTP/STP

Live Series Switches

Español

+ 12 hidden pages