AirLive Air4G User Manual

Air4G
User
s Manual
Wireless-N 4G/3G Broadband Router
Copyright and Disclaimer
Copyright
The contents of this publication may not be reproduced in any part or as a whole, stored,
transcribed in an information retrieval system, translated into any language, or transmitted
in any form or by any means, mechanical, magnetic, electronic, optical, photocopying,
manual, or otherwise, without the prior written permission.
Trademarks
All products, company, brand names are trademarks or registered trademarks of their
respective companies. They are used for identification purpose only. Specifications are
subject to be changed without prior notice.
This product contains some codes from GPL. In compliance with GPL agreement, AirLive will
publish the GPL codes on our website. Please go to www.airlive.com and go to the "Support
GPL" menu to download source code.
i AirLive Air4G User’s Manual
Copyright and Disclaimer
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against radio interference in a commercial environment. This
equipment can generate, use and radiate radio frequency energy and, if not installed and
used in accordance with the instructions in this manual, may cause harmful interference to
radio communications.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user, at his own expense, will be required to take whatever measures are
necessary to correct the interference.
CE Declaration of Conformity
This equipment complies with the requirements relating to electromagnetic compatibility.
AirLive Air4G User’s Manual
ii
Table of contents
Table of contents
1. Introduction.................................................................................1
1.1 PACKING LIST.......................................................................................................1
1.2 HARDWARE INSTALLATION .....................................................................................2
2. Getting Started with Easy Setup Utility ....................................5
2.1 EASY SETUP BY WINDOWS UTILITY ........................................................................5
2.2 EASY SETUP BY CONFIGURING WEB PAGES..........................................................17
3. Making Configuration...............................................................22
3.1 BASIC SETTING ..................................................................................................23
3.1.1. Network Setup ............................................................................................23
3.1.2. DHCP Server ...............................................................................................35
3.1.3. Wireless Settings .......................................................................................39
3.1.4. Change Password ......................................................................................42
3.2 FORWARDING RULES ..........................................................................................42
3.2.1. Virtual Server ..............................................................................................43
3.2.2. Special AP...................................................................................................44
3.2.3. Miscellaneous.............................................................................................46
3.2.4. IP CAM.........................................................................................................46
3.3 SECURITY SETTING.............................................................................................47
3.3.1. Status ..........................................................................................................47
3.3.2. Packet Filters ..............................................................................................48
3.3.3. Domain Filters ............................................................................................50
3.3.4. URL Blocking..............................................................................................52
3.3.5. MAC Control ...............................................................................................53
3.3.6. Miscellaneous.............................................................................................54
3.4 ADVANCED SETTING ...........................................................................................55
3.4.1. Status ..........................................................................................................56
3.4.2. System Log .................................................................................................57
3.4.3. Dynamic DNS..............................................................................................58
3.4.4. QOS .............................................................................................................59
3.4.5. SNMP ...........................................................................................................60
3.4.6. Routing........................................................................................................61
3.4.7. System Time ...............................................................................................62
3.4.8. Scheduling ..................................................................................................63
3.5 TOOL BOX..........................................................................................................65
3.5.1. System Info .................................................................................................66
3.5.2. Firmware Upgrade ......................................................................................67
3.5.3. Backup Setting ...........................................................................................67
3.5.4. Reset to Default ..........................................................................................68
3.5.5. Reboot .........................................................................................................68
3.5.6. Miscellaneous.............................................................................................68
iii AirLive Air4G User’s Manual
Table of contents
4. Troubleshooting .......................................................................69
Appendix A. Spec Summary Table..............................................74
Appendix B. Licensing information ............................................75
AirLive Air4G User’s Manual
iv

1. Introduction

1. Introduction
1
The Air4G is a high-performance tool that supports wireless networking at home, work, or in a public place. The Air4G supports a USB 3G/4G modem card, either WCDMA, EVDO,LTE and even HSDPA as well, and supports wireless data transfers up to 150Mbps, and wired data transfers up to 100 Mbps. TheAir4G is compatible with industry security features.

1.1 Packing List

1. Air4G
2. Power adapter (5V,2A)
3. Installation CD
4. Quick Setup Guide
AirLive Air4G User’s Manual 1

1.2 Hardware Installation

A. Hardware configuration
1. Introduction
2
AirLive Air4G User’s Manual
B. Installation Steps
Note: DO NOT connect the router to power before performing the installation
steps below.
Step 1. Plug a USB modem into USB port.
1. Introduction
Step 2. Insert RJ45 cable into LAN Port on the back panel of the router. Then plug the
other end of into computer.
AirLive Air4G User’s Manual 3
1. Introduction
Step 3. Plug the power jack into the receptor on the back panel of the router. Then plug the
other end into a wall outlet or power strip.
4
AirLive Air4G User’s Manual

2. Getting Started with Easy Setup Utility

2. Getting Started with
2
There are two approaches for you to set up the Air4G quickly and easily. One is through executing the provided Windows Easy Setup Utility on your PC, and the other is through browsing the device web pages and configuration.
Easy Setup Utility

2.1 Easy Setup by Windows Utility

Windows Utility
Step 1.
Install the Easy Setup Utility from the provided CD then follow the steps to configure the device.
Step 2.
Select Language then click “Next” to continue.
AirLive Air4G User’s Manual 5
Step 3.
Then click the “Wizard” to continue.
2. Getting Started with Easy Setup Utility
Step 4. Click “Next” to continue.
6
AirLive Air4G User’s Manual
Step 5. Select Wireless “Enable”, and then click “Next” to continue.
2. Getting Started with Easy Setup Utility
Step 6.
Enter SSID, Channel and Security options, and then click “Next” to continue.
AirLive Air4G User’s Manual 7
Step 7. Click” Let me select WAN service by myself” to select WAN service manually.
2. Getting Started with Easy Setup Utility
Step 8. Select “3G/4G” Service by clicking 3G/4G icon to continue.
8
AirLive Air4G User’s Manual
Step 9.
Select “Auto-Detection” and the Utility will try to detect and configure the required 3G/4G service settings automatically. Click “Next” to continue.
2. Getting Started with Easy Setup Utility
Step 10. Or you can select “Manual” and manually fill in the required 3G/4G service settings provided by your ISP. Click “Next” to continue.
AirLive Air4G User’s Manual 9
Step 11. Click “Next” to save your setting.
2. Getting Started with Easy Setup Utility
Step 12. The Air4G is rebooted to make your entire configuration take effect.
10
AirLive Air4G User’s Manual
Step 13::
Click “Next” to test the Internet connection or you can ignore test.
2. Getting Started with Easy Setup Utility
Step 14::
Click “Next” to test WAN Networking service.
AirLive Air4G User’s Manual 11
Step 15::
Click “Finish” to complete the setting.
2. Getting Started with Easy Setup Utility
Step16:
After configured, you can also click the “Advanced” icon to diagnostic your network. .
12
AirLive Air4G User’s Manual
Step17:
Click the “Refresh” icon to diagnostic your network.
Click “Next” to continue.
2. Getting Started with Easy Setup Utility
AirLive Air4G User’s Manual 13
Step18:
Click the “Internet” icon to test the Internet connection.
2. Getting Started with Easy Setup Utility
Internet Status:
14
AirLive Air4G User’s Manual
Step19:
Click the “PC” icon to check the PC Network Status.
2. Getting Started with Easy Setup Utility
PC Network Status:
AirLive Air4G User’s Manual 15
Step 20:
Click the “Router” icon; it will direct to Air4G’s web UI.
2. Getting Started with Easy Setup Utility
Direct to web UI.
16
AirLive Air4G User’s Manual
2. Getting Started with Easy Setup Utility

2.2 Easy Setup by Configuring Web Pages

You can also browse web UI to configure the device.
Browse to Activate the Setup Wizard
Type in the IP Address (http://192.168.1.254)
Type in the default password “admin” in the System Password and then click ‘login’ button.
Select your language.
Select “Wizard” for basic settings with simple way.
AirLive Air4G User’s Manual 17
Press “Next” to start the Setup Wizard.
Configure with the Setup Wizard
2. Getting Started with Easy Setup Utility
Step 1. Setup Login
Password
Change System Password.
(Defaultadmin)
Step 2. Select Time Zone
18
AirLive Air4G User’s Manual
Step 3. Select WAN Type
Choose Auto-Detecting or Manually to set WAN Type.
Step 4. Select WAN Type
2. Getting Started with Easy Setup Utility
If you want to use 3G/4G service as the main internet access, please set the WAN interface as “Wireless WAN” and the WAN type as “3G/4G”.
Step 5. 3G/4G Mode
Select Auto-Detection then click “Next” to continue.
AirLive Air4G User’s Manual 19
Step 6. Wireless Settings
Setup your Wireless Network: SSID and Channel.
Step 7. Wireless Settings
Setup your Encryption Key
2. Getting Started with Easy Setup Utility
here, then click” Next” to continue.
20
AirLive Air4G User’s Manual
Step 8.
Confirm your Setting.
Click Apply Settings to complete the setting.
2. Getting Started with Easy Setup Utility
Step 9.
Click Finish to complete it.
AirLive Air4G User’s Manual 21

3. Making Configuration

3. Making Configuration
3
Whenever you want to configure your network or this device, you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the device. The default IP Address is 192.168.1.254.
Enter the default password “admin” in the System Password and then click ‘login’ button.
Then, you can browse the “Advanced” configuration pages for configuring this device.
22
AirLive Air4G User’s Manual
Loading...
+ 60 hidden pages