Airlink101 AWLL5099 User Manual

Quick Installation Guide

Wireless N 150 Ultra Mini USB Adapter

Ver. 1.0

Model # AWLL5099

Package Contents:

• Wireless N 150 USB

Adapter

• Driver & Utility CD

• Quick Installation Guide

Section 1

Install the Wireless USB Adapter

This Quick Installation Guide only provides the basic installation instructions.
For detailed instructions of other advanced features, please refer to the User’s
Manual that can be found on the provided CD.

For Macintosh users, you can find the software and installation instructions for
MAC 10.4, 10.5, 10.6 is under the MAC directory on the provided CD.

Step 1.1 Insert the USB adapter into an available USB port of your computer.

Step 1.2 Click Cancel when you see the Found New Hardware Wizard.

Windows XP/2000 Users:

Windows 7/Vista Users:

Step 1.3 Insert the Installation CD in the CD ROM drive. The Autorun screen

will pop up. Select Install Utility and Driver from the menu.

Note: If the Autorun screen doesn’t appear automatically, go to Start, Run, and
type D:\Utility\Setup.exe (where D is the letter of your CD ROM drive) and
click OK.

Windows 7/Vista Users: When you get warning message(s), make sure that

you give permission to continue with the installation of the driver software.

Step 1.4 The AutoPlay screen will popup. Click Run Autorun.exe on the

screen.

Step 1.5 Click Next to begin the installation.

Please wait for Windows to finish installing the Airlink101 Wireless Monitor and
driver for Airlink101 Wireless Adapter, and the utility.

Step 1.6 Select Yes, I will restart my computer now. Click Finish to

complete the installation.

The driver and utility have been installed. Please continue to Section 2.