Appendix A – Features..................................................................................................31
Appendix B – Information.............................................................................................. 32
Technical Support .........................................................................................................34
2
1. Introduction
Congratulations on your purchase of the 300N Draft 802.11n Wireless PCI Adapter. The
300N PCI Adapter provides wireless data rate of up to 300 Mbps* when used with other
AirLink101™ 300N wireless products. The high bandwidth combined with extended
wireless coverage delivers fast and reliable connection for all of your networking
applications.
A full range of security features such as WEP, WPA-PSK, and WPA2-PSK provide the
highest level of wireless network security. The bundled Wireless Utility allows you to set
up the adapter with an easy-to-use user interface. Best of all the 300N PCI Adapter
works with 802.11g and 802.11b network devices ensuring compatibility with your
existing wireless products.
1.1 Package Contents
Before you begin the installation, please check the items of your package. The package
should include the following items:
• Wireless PCI Adapter
• Quick Installation Guide
• Installation CD (Driver/Utility/Manual)
1.2 Features
• Industry’s highest wireless data rate of up to 300 Mbps* with IEEE 802.11n draft
specification version 1.0.
• 3 antennas for wider coverage and continuous connectivity eliminates dead spots
• 64-bit/128-bit WEP encryption, Pre-shared Key (PSK), and Wi-Fi Protected
Access (WPA2) and WPA support provide full protection for your wireless
connection
• Higher data rate increases the reliability and stability of wireless connections
• Great for environments with higher wireless data traffic requirements
• Fully backward-compatible with 802.11b/g devices
• Works best with other AirLink101™ 300N wireless products
3
2. Installation
2.1 Install Driver & Utility
This section provides instructions on how to install the 300N Draft 802.11n Wireless
PCI Adapter. The driver is installed along with the utility.
Note: Be sure to turn off your computer before inserting the Adapter.
For Windows 98SE and ME users, you may be prompted to insert the Windows 98SE or
ME CD during the driver installation. Be sure to have your Windows 98SE or ME CD
ready.
Step 1Insert the PCI adapter into an available PCI slot and turn on your computer.
Step 2 After turning on the computer, Windows will launch the Found New Hardware
Wizard. The Found New Hardware Wizard appears differentlydepending on your
operating system. Click Cancel to quit the wizard and insert the Installation CD into your
CD drive.
4
Step 3The Autorun screen will pop up. Select Install Driver and Utility from the menu.
Note: If the Autorun screen doesn’t appear automatically go to Start, Run, and type
D:\Utility\Setup.exe (where D is the letter of your CD drive) and click OK.
Step 4Click Next at the welcome screen.
5
Step 5 Click Next to accept the default destination folder.
Step 6 Click Continue Anyway at the Windows Logo Screen.
(For Windows 2000, click Yes at the Digital Signature Not Found prompt).
6
Step 7 Verify Yes, I want to restart my computer now is selected and click Finish to
restart your computer.
Step 8After the computer is restarted, Windows will ask to connect to Windows
Update, select No, not this time and click Next.
7
Step 9Select Install the software automatically and click Next.
Step 10Click Continue Anyway at the Windows Logo Screen.
(For Windows 2000, click Yes at the Digital Signature Not Found prompt).
For Windows 98SE and ME, select Search for the best driver for your device
and click Next. Verify all the check boxes are checked and click Next.
8
Step 11Click Finish. (Restart the computer for Windows 98SE and ME).
9
2.2 Verify Driver Installation
To verify if the driver has been installed successfully, please perform the following steps.
Step 1 Right-click on My Computer from your desktop and select Properties.
Step 2 Select the Device Manager tab. (For Windows 2000/XP, select the Hardware
tab first then click on Device Manager).
10
Step 3 Expand Network adapters from the list and verify that AirLink101 300N
Wireless PCI Adapter is listed and no yellow question mark is beside it.
If AirLink101 300N Wireless PCI Adapter is not listed, or you see a yellow question
mark beside it, please re-install the driver again.
11
Loading...
+ 23 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.