Airlink101 awlc4130 User Manual

Quick Installation Guide

Super G Wireless Cardbus Adapter

Model # A WLC4130

Package Content:

• Cardbus Adapter

• Driver & Utility CD

• Quick Installation Guide

Ver. 1A

Section 1

Install Utility and Driver

This Quick Installation Guide only provides the basic instructions. For more
advanced features, please refer to the User’s Manual in the provided CD.

Note: Do not insert the Cardbus Adapter until you have reached the appointed
step.

Step 1 Insert the Driver & Utility CD into your CD drive and select Install Driver

and Utility from the menu.

Note: If the autorun screen doesn’t appear automatically, go to Start, Run, and
type D:\Utility\Setup.exe (where D is the letter of your CD drive) and click OK.

Step 2 Click Next at the welcome screen.

Step 3 Click Next to accept the default destination folder to install the software or

Section 2

click Browse to manually select a different destination folder .

Step 4 Click Next at the Select Program Folder screen.

Step 5 Insert the Cardbus Adapter when you are prompted to do so.

Step 6 Verify “Yes, I want to restart my computer now” is selected and click

Finish to restart your computer.

Continue on Back

Section 2

Section 3

Configure the Cardbus Adapter

Step 1 To open the cardbus adapter’s utility, double-click on the WLAN Monitor

Icon in the system tray.

Step 3 You will be prompted for the security key if you have one setup for your

wireless network. Verify the key you enter is correct and click Connect.

The utility automatically adds an available wireless network to the Preferred
WLANs box. If no SSID is added, or if the SSID is wrong, please refer to the
following steps to join the appropriate wireless network.

Step 2 Select the SSID of the wireless network you wish to connect to from the

Available WLANs box and click Connect.

Step 4 V erify the SSID you have selected is in the Preferred WLANs box and

click Apply.

Note: Be sure to remove the wrong SSID from the Preferred WLANs box. Y ou
can remove the wrong SSID by selecting it and clicking on Remove.

Step 5 A blue circle will surround the SSID you have chosen after connecting

successfully . Click OK to close the window.

Congratulations! The installation for your Super G Carbus Adapter is complete. For
more advanced features and additional details, please refer to the User’s Manual
on the provided CD.

Section 3

Technical Support

E-mail: [e-mail]
T oll Free: 1-888-746-3238
Web Site: www .airlink101.com

*Super G technology (108 Mbps) can only be obtained when using products with Atheros Super G chipset.
*Theoretical maximum wireless signal rate based on Atheros Super G and IEEE standard 802.1 1g specifications. Actual data throughput will

vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, mix of wireless
products used, radio frequency interference (e.g., cordless telephones and microwaves) as well as network overhead lower actual data
throughput rate.

Copyright © 2007 AirLink101. All rights reserved. AirLink101, the stylized AirLink101 logo, specific product designations, and all other words
and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of AirLink101.
All other product or service names are the property of their respective holders. AirLink101 products are protected under numerous U.S. and
foreign patents and pending applications, mask work rights, and copyrights.