Airlink101 AR625W User Manual

300N Draft 802.11n Wireless Router

Model # AR625W

Quick Installation Guide

Rev. 1.0

Section 1

This Quick Installation Guide only provides the basic instructions. For more
detailed information, please refer to the User’s Manual in the supplied CD.

Connecting the Router

Note: Prior to connecting the router , be sure to power of f your computer, DSL/Cable modem, and the

router. T o achieve maximum wireless coverage, tilt the router’s antennas outward at 45° angle.

Step 1 Connect one end of a network cable to the WAN port of the router and connect the other end of

the cable to the DSL/Cable modem.

Step 2 With another network cable, connect one end of the cable to your computer’s network card and

connect the other end to one of the LAN ports of the router .

Step 3 Power on the DSL/Cable modem and wait for the lights on the modem to settle down.
Step 4 Power on the router by connecting one end of the supplied power adapter to the power jack of the

router and connecting the other end to an electrical outlet.

Step 5 Power on your computer .
Step 6 Make sure the WAN, WLAN, and the LAN port that the computer is connected to are lit. If not, try

the above steps again.

Section 2

Configuring the Router

Step 1 Open the web browser (Internet Explorer or Netscape), type 192.168.1.1 in the Address bar and

press Enter.

Step 2 Enter admin for both the username and password fields and click OK.