Air King FRAS60, FRAS120, FRAK130, FRAK80, FRAS90 User Manual

...
CUS
certifies that the models shown
herein are licensed to bear the
AMCA seal. The ratings shown
are based on tests and procedures
performed in accordance with
AMCA Publication 211 and AMCA
Publication 311 and comply with
the requirements of the Certified
Ratings Program.
Specifications subject to
change without notice.
Air King Ventilation Products
based on actual speed of test. The loudness ratings shown are loudness values in fan
sones at 5 ft. (1.5m) in a hemispherical free field calculated per AMCA standard 301. Values
shown are for installation type B: free inlet fan sone levels. The AMCA Certified Ratings
Seal does not apply to HVI Sones.
Performance shown is for FRAK exhaust models for installation type B: Free inlet, Ducted
outlet. Performance ratings include the effects of an inlet grille, ceiling radiation damper
and backdraft damper in the airstream. Speed (RPM) shown is nominal. Performance is
Model Motor Housing Damper @ P
FRAS50 FA50T AKFH1 AKFD1 47/4.0 2250 3.0
FRAS60 FA60T AKFH1 AKFD1 60/5.7 2500 4.5
FRAS70 FA70T AKFH1 AKFD1 66/6.9 2750 5.0
S.1 WG RPM Sones
• Availability: Single Packs or sold in Contractor Packs of 6
(Housing, Damper, Motor/Blade/Grill).
Classification - Ceiling Radiation Damper is ULC classified
and rated for a 3-4 hour fire resistance. U.L. listed 555C.
California State Marshall classification for 1 or 2 hour fire
damper rating. California State Marshall listing number
3225-1374-101.
CFM/Sones HVI
• Damper:
Blanket - Non-asbestos, ceramic blanket
Fusible Link - Replaceable, 165°F standard
• Unit Mounting: Unit is centered between joists (with 16"
centers) using hanging brackets. The housing will mount
through drywall thickness up to
3
/
4
".
• Duct Collar: Metal collar for 3" duct connection, comes
complete with built in back draft damper.
thermally protected.
wide, with 10 blades.
an economical solution
when a Ceiling Radiation
Damper is required.
• Grill: Cold rolled steel, powder coated white.
• Blower Wheel:
• Motor: Single coil plug-in, two pole motor, life time lubrication,
• Fan Housing: 24 gauge galvanized steel housing.
One piece polymeric wheel, 4
1
/
2
" diameter, 1"
Advantage 3" Duct
Fire Rated Exhaust
Fan Series
The Advantage 3" Duct Fire
Rated Exhaust Fan Series is
FRB-1
110 Glidden Road • Brampton, Ontario L6T 2J3 • 800-250-8767
820 Lincoln Avenue • West Chester, PA 19380 • 877-304-3785
www.airkinglimited.com or contact your local sales representative.
United States
Canada
February 2006
Join Air King in the future of Ventilation!
For more information about the Fire Rated Exhaust Fans Series
or Air King’s complete line of Exhaust Fans, Range Hoods, and
Building Products, visit the Air King web site at
CUS
Why do I need a Fire
Rated Exhaust Fan?
Your local code will dictate if and what type of Fire
Rated Exhaust Fan you will need. Generally any time
a common duct is used in a multi-dwelling situation,
a Fire Rated Exhaust Fan will be required to prevent
fire from using the common ducting to spread from
one dwelling to the next. This is usually true in
commercial and multi-family housing constructions.
Specifications subject to
change without notice.
Values shown are for installation type B: free inlet fan sone levels. The AMCA Certified
Ratings Seal does not apply to HVI Sones.
Performance shown is for FRAK exhaust models for installation type B: Free inlet, Ducted
outlet. Performance ratings include the effects of an inlet grille, ceiling radiation damper
and backdraft damper in the airstream. Speed (RPM) shown is nominal. Performance is
based on actual speed of test. The loudness ratings shown are loudness values in fan
sones at 5 ft. (1.5m) in a hemispherical free field calculated per AMCA standard 301.
FRAK130 FAK130T AKFH2 AKFD2 120/3.6 1250 3.0
Model Motor Housing Damper @ P
FRAK80 FAK80T AKFH2 AKFD2 80/2.6 1250 1.5
FRAK90 FAK90T AKFH2 AKFD2 90/2.9 1250 2.0
FRAK110 FAK110T AKFH2 AKFD2 110/3.5 1250 2.5
• Availability: Single Packs or sold in Contractor Packs of 4
(Housing, Damper, Motor/Blade/Grill).
ducting system to the other rooms or dwellings.
and rated for a 3-4 hour fire resistance. U.L. listed 555C.
California State Marshall classification for 1 or 2 hour fire
damper rating. California State Marshall listing number
3225-1374-101.
What does a Fire
Rated Exhaust Fan Do?
The Fire Rated Exhaust Fan Series is designed to
automatically shut off and seal the duct from the rest
of the dwelling once the temperature of air passing
through the damper exceeds that of the fusible link.
This prevents the spread of smoke or fire through the
• Damper:
Blanket - Non-asbestos, ceramic blanket
Fusible Link - Replaceable, 165°F standard
Classification - Ceiling Radiation Damper is ULC classified
• Unit Mounting: Unit is centered between joists (with 16"
complete with built in back draft damper.
centers) using hanging brackets. The housing will mount
through drywall thickness up to
Fire Rated Exhaust Fan.
• Grill: Cold rolled steel, powder coated white.
• Blower Wheel:
• Motor: Heavy duty, permanently split capacitor, 4 pole motor,
• Fan Housing: 24 gauge galvanized steel housing.
• Duct Collar: Metal collar for 4" duct connection, comes
life time lubrication, thermally protected.
5
7
/
32
" diameter, 2
Series combines style
and quiet operation with
a Ceiling Radiation Damper.
The Air King Fire Rated Exhaust Fan Series consists
of a three part system designed to meet the NFPA’s
(National Fire Protection Association) Standard 90A.
The unit consists of a Housing, a Ceiling Radiation
Damper that is ULC Classified and rated for 3 - 4 hour
fire resistance, and the Motor/Blade/Grill. When all
three of these parts are used together they create a
What is a Fire Rated
Exhaust Fan?
Deluxe Quiet Fire
Rated Exhaust Fan
Series
The Deluxe Quiet Fire
Rated Exhaust Fan Series
certifies that the models shown
herein are licensed to bear the
AMCA seal. The ratings shown
are based on tests and procedures
performed in accordance with
AMCA Publication 211 and AMCA
Publication 311 and comply with
the requirements of the Certified
Ratings Program.
CUS
Air King Ventilation Products
Specifications subject to
change without notice.
shown are for installation type B: free inlet fan sone levels. The AMCA Certified Ratings
Seal does not apply to HVI Sones.
3
/
4
CFM/Sones HVI
S.1 WG RPM Sones
Performance shown is for FRAK exhaust models for installation type B: Free inlet, Ducted
outlet. Performance ratings include the effects of an inlet grille, ceiling radiation damper
and backdraft damper in the airstream. Speed (RPM) shown is nominal. Performance is
based on actual speed of test. The loudness ratings shown are loudness values in fan
sones at 5 ft. (1.5m) in a hemispherical free field calculated per AMCA standard 301. Values
FRAS90 FA90T AKFH2 AKFD2 90/3.1 1250 2.5
FRAS120 FA120T AKFH2 AKFD2 120/3.7 1300 3.0
Model Motor Housing Damper @ P
• Availability: Single Packs or sold in Contractor Packs of 4
(Housing, Damper, Motor/Blade/Grill).
California State Marshall classification for 1 or 2 hour fire
damper rating. California State Marshall listing number
3225-1374-101.
Fusible Link - Replaceable, 165°F standard
Classification - Ceiling Radiation Damper is ULC classified
and rated for a 3-4 hour fire resistance. U.L. listed 555C.
".
• Damper:
centers) using hanging brackets. The housing will mount
through drywall thickness up to
Blanket - Non-asbestos, ceramic blanket
One piece polymeric centrifugal blower wheel,
29
/
32
" wide, with 30 blades.
• Grill: Cold rolled steel, powder coated white.
• Blower Wheel:
• Motor: Heavy duty, plug-in, permanently split capacitor, 4 pole
• Fan Housing: 24 gauge galvanized steel housing.
• Duct Collar: Metal collar for 4" duct connection, comes
• Unit Mounting: Unit is centered between joists (with 16"
motor, life time lubrication, thermally protected.
complete with built in back draft damper.
2
3
/
8
" wide, with 48 blades.
One piece polymeric wheel, 5
performance with a
Ceiling Radiation Damper.
Advantage 4" Duct
Fire Rated Exhaust
Fan Series
The Advantage 4" Duct
Fire Rated Exhaust Fan
Series combines high
Air King Ventilation Products
certifies that the models shown
herein are licensed to bear the
AMCA seal. The ratings shown
are based on tests and procedures
performed in accordance with
AMCA Publication 211 and AMCA
Publication 311 and comply with
the requirements of the Certified
Ratings Program.
CFM/Sones HVI
S.1 WG RPM Sones
3
/
4
".
7
/
32
" diameter,
Loading...