Air King 9230 Operating Instructions And Parts Manual
Rev. I 9/06
8
5084029
Rev. I 9/06
1
5084029
SPECIFICATIONS
Motor ................................. 120V , 50/60 Hz
Blade diameter .................. 30 " (76.2cm) Model 9230
Speeds .............................. 3
Control .............................. Rotary Switch
Air flow distribution ........... 190˚
Approvals .......................... UL Listed. Close mesh fan guard
meets OSHA requirements.
DESCRIPTION
The AirKing 30" (76.2 cm) pivot/floor f an features 3-speed operation
with a 3-paddle fan blade. The fan has an enclosed motor with
permanently lubricated ball bearings with a 10 ft (3.05 m) 18/3 cord set,
and is constructed of sturdy powder coated steel.
OPERATING INSTRUCTIONS & PARTS MANUAL
MODELO 9230
UNPACKING
When unpacking the unit, inspect carefully for any damage that
may have occurred during transit. Check for loose, missing, or
damaged parts.
GENERAL SAFETY INFORMATION
1. Read all instructions before using Fan.
2. Make certain that the power source conforms to the electrical
requirements of the Fan.
3. Use this Fan only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electrical
shock, or injury to persons.
4. To reduce the risk of personal injury and electric shock, the Fan should
not be played with or placed where small children can reach it.
5. Unplug power cord before installing, servicing, or moving the Fan.
WARNING: DO NOT DEPEND UPON THE ON-OFF SWITCH AS
THE SOLE MEANS OF DISCONNECTING POWER WHEN INSTALLING OR SERVICING THE FAN. ALWAYS UNPLUG THE
POWER CORD.
6. This Fan must NOT be used in potentially dangerous
locations such as flammable, explosive, chemical-laden
or wet atmospheres.
7. DO NOT use Fan in or near a window. Rain may create an
electrical hazard.
8. Completely assemble Fan, according to instructions, before
connecting to power supply.
9. The power cord is equipped with a three-prong grounded plug
that must be inserted into a matching receptacle. Under no circumstances should the ground prong be cut off the plug. Where
a two-prong wall receptacle is encountered, it must be replaced
with a properly grounded three-prong receptacle installed in accordance with the National Electrical Code (NEC) and all applicable local codes and ordinances. This work must be done by a
qualified electrician, using copper wires only.
WARN ING: DO NOT USE A THREE-PRONG ADAPTER. IM-
PROPER CONNECTION MAY CAUSE THIS RISK OF ELECTROCUTION. USE OF SUCH ADAPTERS IS NOT PERMITTED
IN CANADA.
10. Where possible, avoid the use of extension cords. If they must be
used, minimize the risk of overheating by ensuring that they are
UL listed. Never use a single extension cord to operate more than
one Fan.
11.Do not operate any Fan with a damaged cord or plug or after the
Fan malfunctions, has been dropped or damaged in any manner.
Return Fan to authorized service facility for examination, electrical
or mechanical adjustment or repair.
12.Do not insert or allow fingers or foreign objects to enter any
ventilation or exhaust opening as it may cause an electric shock
or fire, or damage the Fan. Do not block or tamper with the Fan
in any manner while it is in operation.
13.Always place the Fan on a stable, flat, level surface when
operating, to avoid the chance of the Fan overturning. Locate the
Power Cord so the Fan or other objects are not resting on it. Do
not run Power Cord under carpeting. Do not cover Power Cord
with throw rugs, runners, or the like. Arrange Power Cord away
from room traffic and where it will not be tripped over.
14.This Fan is not intended for use in wet or damp locations.
Never locate a Fan where it may fall into a bathtub or other
water container.
15. Do not use Fan outdoors.
WARNING: REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK – DO NOT USE THIS FAN WITH ANY SOLID STATE
SPEED CONTROL DEVICES.
SAVE THESE
INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
30" FLOOR FAN
30" (76.2 cm) MODEL 9230
MODEL 9230
SPEED HIGH MED LOW
CFM 7400 6360 4980
M3/s 3.49 3.00 2.35
RPM 1110 975 822
Amps 2.04 1.81 1.60
Watts 234 206 176
dB A 75 71 67
18
17
6
5
15
10
8
12
7
11
9
2
3
20
19
11
16
7
12
21
18
13
14
4
1
17
22
22
Ref No. De
Descripción Cant.
No. Parte
* Articulo Incluyendo el numero de Empaques 5098012
** Patas de caucho con remache no incluidas
1 02084613 Adorno Tipo Ojo de Buey 1
2 5097140BK Rejilla Delantera 1
3 5081021BK Paleta 1
4 5090012 Tornillo 5/16-24 1
5 5090012 Tornillos del motor 10-32 X 5/16 5
6 5097010BK
Rejilla Trasera con Placa 1
de Pivote Con Hexagonal
7 * Bolt 1/4-20 X 1” 4
8 5062211BK Manija 1
9 05010051 Empuñadura de la manija 1
10 5062085BK Pedestal 2
11 * Arandela de Seguridad 2
12 * Perno de 1/4-20 X 3/4” 2
13 02030024SK Perilla del Interruptor 1
14 02030024SW Interruptor 1
15 02030224 Conjunto del Motor 1
16 02030024CS Juego de Alambre Flexible 1
17 5090050 Eje tapa Perno 2
18 05010050 Ruedas 2
19 5062215BK La Barra del Eje 1
20 5062215BK Escuadra de montaje 1
21 2090058B Tornillo #8 X 7/16 2
22 02011601 Espaciador de caucho 2
Rev. I 9/06
2
5084029
Rev. I 9/06
7
5084029
MODEL 9230
MODELO 9230
GARANTÍA LIMITADA DE TRES AÑOS DE AIRKING. AirKing garantiza el producto al usuarlo original, contra defectos de
mano de obra o materiales en condiciones de uso normales. El motor está garantizado por tres años y todas las demás partes
por un año, a partir de Ia fecha de compra. Toda pieza qua AirKing determine que está defectuosa en material o mano de obra
y sea enviada a un centro de serviclo autorizado, designado por AirKing, con los costos de envío prepagados, será, como
remedio exclusivo, reparada o reemplazada a opción de AirKing. Para procedimientos de reclamación de garantía, véase el
párrafo de RÁPIDA DISPOSICIÓN a continuación. Esta garantía limitada otorga a los compradores derechos legales
específicos que varían de estado a estado.
LIMITACIÓN DE RESPONSABILI DAD. En Ia medida que lo permitan las leyes aplicables, AirKing renuncia expresamente
a toda responsabilidad por daños y perjuicios indirectos. La responsabilidad de AirKing en todo caso estará limitada al precio
de compra y no habrá de exceder de éste.
DENEGACIÓN DE GARANTÍA. AirKing ha realizado un esmerado esfuerzo por ilustrar y describir de manera precisa los prod
uctos que aparecen en el presente material impreso; sin embargo, dichas ilustraciones y descripciones son para el solo propósito
de identificación y no expresan o implican una garantía de que los productos son comerciables, o que son aptos para cierto
propósito en particular, o que los productos necesariamente se conformarán a las ilustraciones o descripciones.
Con excepción de lo dispuesto a continuación, AirKing no hace ni autoriza ninguna garantía o declaración de un hecho, ni
expresa ni implícitamente, aparte de lo declarado en el párrafo “GARANTÍA LIMITADA” anterior.
IDONEIDAD DEL PRODUCTO. Muchos estados y localidades tienen códigos y reglamentos que rigen la venta, construcción,
instalación y/o el uso de productos para ciertos propósitos, los cuales pueden variar de los de áreas vecinas. Si bien AirKing trata de
asegurarse de que sus productos cumplan con dichos códigos, AirKing no puede garantizar el cumplimiento de los mismos ni puede
ser responsable de la manera en que se instale o se use el producto. Antes de comprar y utilizar un producto, sírvase examinar la
aplicación del mismo y los códigos y reglamentos nacionales y locales, y cerciorarse de que el producto, la instalación y el uso cumplan
con ellos.
Ciertos aspectos de las denegaciones de responsabilidad no son aplicables a productos de consumo; por ejemplo, (a) algunos
estados no permiten la exclusión o limitación de daños y perjuicios indirectos, por lo que la limitación o exclusión anterior podría
no ser aplicable a usted; (b) además, ciertos estados no permiten limitaciones a la duración de una garantía implícita y por
consiguiente la limitación anterior podría no ser aplicable a usted; y (c) por ley, durante el periodo de la Garantía Limitada, y
garantías implícitas de comerciabilidad o idoneidad para cierto propósito en particular aplicable a los productos de consumo
adquiridos por el público consumidor, no podráan ser excluidas o denegadas de ninguna otra forma.
RÁPIDA DISPOSICIÓN. AirKing realizará un esfuerzo de buena fe por rápidamente corregir o hacer algún otro ajuste a cualquier
producto que se demuestre que está defectuoso dentro de la garantía limitada. Pars todo producto que se crea que está
defectuoso dentro de la garantía limitada, escriba o llame primero al comarciante al que haya comprado el producto. Él Ie dará
instrucciones adicionales.
GARANTÍA LIMITADA
STAND ASSEMBLY
(Figure 1)
1. Remove all contents from the carton.
2. Place Fan flat on the floor with the Motor facing towards the
ceiling. Make certain the Control Panel on the top of the motor is
facing forward. Orient stand halves as illustrated and install (1)
1/4-20 X 1” Bolt through upper stand hole on both stand halves.
Place a Rubber Spacer between the stand halves and the rear
grill pivot bracket to left of motor.
(Inset A)
Secure the bolt
tightly.
3. MAKE CERTAIN HANDLE IS FACING OUTWARD AND IS ON
THE RIGHT SIDE OF THE MOTOR. While holding Handle in
position as shown, install (1) 1/4-20 X 1” Bolt thru Handle and
upper stand halves. Place a rubber spacer between the stand
halves and the rear grill pivot bracket to right of motor.
(Inset B)
Secure the bolt tightly.
4. Install (1) 1/4-20 X 1" Bolt, (1) 1/4-20 Hex Nut and (1) 1/4"
Lockwasher to the remaining lower holes on each side of the Fan.
WHEEL ASSEMBLY
(Figure 2)
ASSEMBLE STAND COMPLETELY BEFORE
INSTALLING WHEEL ASSEMBLY
1. Place Mounting Bracket on the underside of the stand halves to
left of the motor as shown.
2. Install two #8 X 7/16 screws through the bottom of the stand
using a #2 Phillips Head Screwdriver.
3. Slide Axle Rod through Mounting Bracket.
4. Install the two wheels onto the Axle Rod and secure with
two Axle Cap Nuts. Press Axle Cap Nut onto Axle Rod.
OPERATION
1. Plug the fan into a properly grounded three-prong 120V AC
receptacle.
2. Using the rotary switch, set the desired fan speed: (0) Off, (3) High,
(2) Medium, (1) Low.
3.
To Adjust Head Angle: Head will remain stationary when rotated
to desired position. Occasional tightening of pivot hardware may
be required after head is repositioned multiple times.
Inset 1A
Control
Box
Inset 1B
Figure 1
Rubber
Spacer
Rubber
Spacer
MAINTENANCE
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOV-
ING OR SERVICING.
WARNING: DO NOT IMMERSE FAN IN WATER!
CLEANING: Use a soft cloth moistened with a mild soap solution,
such as liquid dish washing detergent. Dry ALL PARTS COMPLETELY before reassembling. After any maintenance or servicing,
completely reassemble unit as described in this instruction manual
before reconnecting to the power supply.
CAUTION: Do not use gasoline, benzine, thinner, harsh
cleaners, etc. as they will damage the Fan. NEVER use
ALCOHOL OR SOLVENTS.
SERVICING: All other servicing, with the exception of general user
maintenance, should be performed by an authorized service representative.
LUBRICATION: Precision bearings are sealed at the factory for life
and do not require further lubrication.
STORAGE: Store the Fan, with these instructions, in a clean and
dry place.
Figure 2
Axle Cap Nut
Axle Cap Nut
Mounting
Bracket
Wheel
Wheel
Axle Rod
#8 X 7/16"
Screws
Loading...