Aiphone SBX-IDVFRA User Manual
SBX-IDVFRA
Stainless Steel Surface Mount Box
-INSTRUCTIONS-
The SBX-IDVFRA is an 18-Gauge stainless steel enclosure designed to surface mount the IS and
IX Series emergency stations as well as the IX Series and JP Series card access door stations.
Compatible stations: IS-DVF-2RA, IX-DVF-2RA, IX-DVF-RA, IX-SSA-2RA, IX-SSA-RA, IX-DVF-P,
JP-DVF-HID, and JP-DVF-RP10.
CONTENTS:
- SBX-IDVFRA surface mount box
- #15 Torx Security ¼" Hex bit
- Qty 4. 8⁄32 x 1" Torx Security Screws
- Qty 4. 8⁄32 Speed Nuts
MOUNTING INSTRUCTIONS:
Mounting
Tabs
1. The SBX-IDVFRA is designed to mount to a 1 or 2-gang
box, ring, or to any at surface.
2. Pass cable through the knockout hole on back or conduit
knockout on bottom.
3. Secure mounting box to wall.
4. Connect wires to door station (Refer to system’s
installation instructions).
5. Connect supplied speed nuts to mounting tabs (4 total).
6. Attach door station to mounting box using the tamper
proof screws and tool supplied with this box.
SPECIFICATIONS:
Mounting: 1 or 2-gang box, or surface mount directly to wall
Material: 18-Gauge Stainless Steel
Color: Polished Stainless Steel
Dimensions (HxWxD): 11-
11
⁄16" x 7" x 3-5⁄16" (top); 2-5⁄16" (bottom)
Interior depth: 2-⅛"
IX-DVF-2RA
Aiphone Corporation
www.aiphone.com
tech@aiphone.com
(800) 692-0200
SBX-IDVFRA Instr.
1218JD
Loading...