Aiphone IX-SSA, SBX-IDVF User Manual
SBX-IDVF
Stainless Steel Surface Mount Box
-INSTRUCTIONS-
The SBX-IDVF is an 18-Gauge stainless steel enclosure designed to surface mount the IS Series
and IX Series stainless steel ush mount door stations.
Compatible with the IS-DVF, IS-IPDVF, IS-SS, IX-DVF, and IX-SSA.
CONTENTS:
- SBX-IDVF surface mount box
- #15 Torx Security ¼" Hex bit
- Qty 4.
- Qty 4.
MOUNTING INSTRUCTIONS:
1. The SBX-IDVF is designed to mount to a 1 or 2-gang
box, ring, or to any at surface.
8
⁄32 x 1" Torx Security Screws
8
⁄32 Speed Nuts
Mounting
Tabs
2. Pass cable through the knockout hole on back or conduit
knockout on bottom.
3. Secure mounting box to wall.
4. Connect wires to door station (Refer to system’s
installation instructions).
5. Connect supplied speed nuts to mounting tabs (4 total).
6. Attach door station to mounting box using the tamper
proof screws and tool supplied with this box.
SPECIFICATIONS:
Mounting: 1 or 2-gang box, or surface mount directly to wall
Material: 18-Gauge Stainless Steel
Color: Polished Stainless Steel
Dimensions (HxWxD): 10-
7
⁄16" x 5-15⁄16" x 3-5⁄16" (top); 2-5⁄16" (bottom)
Interior depth: 2-⅛"
IX-DVF
Aiphone Corporation
www.aiphone.com
tech@aiphone.com
(800) 692-0200
SBX-IDVF Instr.
1218JD
Loading...