Aiphone RX-JA INSTALLATION INSTRUCTIONS

Special
Order
Products

RX-JA

Flush Mounted Door Station for the RAX/RCX Systems

- INSTRUCTIONS -

The RX-JA is a weather resistant door station for use with the RAX or RCX Microprocessor­based intercom system.

WIRING DIAGRAM:

RAX or RCX

CEU

1
2

#10

3
4

1
2

#11

3
4

1
2

#12

3
4

RX-JA

1
2
3
4

BLACK

RA-D

1
2
3
4

BELL

NOTE:

Call-in signal from RX-JA will
not be heard at the master
stations. An external doorbell or
sounding device must be used.

To Power

for Bell

RA-B

1
2
3
4

SPECIFICATIONS:

Power Source: Supplied by master station
Call Button: Single pole, single throw, normally open
Call Annunciation: Pressing call button at sub activates external device
Call Button Contacts: 24V DC, 1A (Max.)
Mounting: 2-gang electrical box
Wiring: 2 twisted pair homerun to RAX/RCX CEU,

plus 2 wires to external signaling device.
Use Aiphone #832204 for homerun wiring,
#812202 for bell connection.

Wiring Distance: RAX: 2,000' with 22AWG

RCX: 6,500' with 22AWG

Dimensions (H x W x D): 4-1/2" x 4-9/16" x 3/8" (outer depth)

Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
[phone]
FAX [phone]

TOLL FREE TECHNICAL SUPPORT:

[phone]

TOLL FREE FAX LINE:

[phone]

E-MAIL: [e-mail]

NOTES:

1.In this example the RX-JA is shown connected
to station 10. Any open station number can be
used.

2. When the call button is pressed on the RX-JA
the external bell will activate, alerting internal
master stations that there is a call from the
door.

3. Any master station can call the RX-JA.

4.Only wiring concerning the RX-JA is shown
here. For complete installation and wiring
information, please refer to the standard RAX/
RCX instructions.

RX-JA Instr.

1198bkjd