o AlPHONE
MIXER AMPLIFIER
INSTRUCTIONS
PM-30
. ■ ■ i .= ■■ ,■ ■■ f -■ f ! t .= f i f i S i i S i i i
PM-60
. .. . -i/:i f . = t a tin ;n
PM-100
‘ i f . ll. i i , i r- * ! i
1. FEATURES:
All transistorized circuitry: high quality design and construction.
1)
Full frequency response: 100Hz~10KHz ± 3dB
2)
Low distortion: less than 3% at rated output
3)
Bass and treble tone control.
4)
Built-in VU meter.
5)
Output Overload Auto protected circuit.
6)
Master volume control.
7)
5 inputs: 3-Mic., 1-Aux. 1-Phone with independent volume control (30W).
8)
8 inputs: 4-Mic., 1-Aux, 1-Tape/Tuner, 1-Phono, 1-Phone with independent volume
control (60W/100W).
AC 117V. 50/60HZ.
9)
10)
Isolated-transformer outputs: 4, 8,16 ohms and 25, 70V.
Handsome modern styling.
11)
2. GENERAL DESCRIPTION:
The PM series Mixer Amplifiers, PM-30(30W), PM-60(60W), PM-100(1 OOW), are designed
for years of trouble-free use in diverse commercial and industrial applications. They pro
vide paging, announcement, intercommunication and background music systems in in
dustrial plants, offices, churches, hotels, department stores, shopping centers, night clubs,
restaurants, convention halls, auditoriums, and stadiums. Their main feature is the ability
to withstand overload and open or short-circuiting of the output. The PM series requires
no complicated protective circuit to withstand accidents or mismatched output con
nections that may occur during the installation or use of a PA system. The amplifier is
protected by a circuit breaker when other abnormal electrical conditions occur.
Four microphone inputs are provided for High and low Impedance microphones.
Four auxiliary (Tape/Tuner, Phono, Phone, Aux) inputs are provided for signal sources
such as FM-Tuner, cassette player, remote-microphone, ceramic or crystal phonograph
cartridge, and telephone system.
Speaker outputs are complete with 4, 8, 16 ohms (usable 4-16 ohms) and 25V or 70V
line coimections. All the inputs and outputs are secured with screw terminals. Terminals
have been covered for protection against electric-shock.
There are four microphone volume controls, four auxiliary volume controls, a master
volume control, bass tone control, treble tone control, and power on/off switch, plus an
overload LED pilot lamp are provided. Also, a VU meter has been added for visual
monitoring.
3. SPECIFICATIONS:
Models: PM-30, PM-60, PM-100
Type : Mixer Power Amplifier
Power Output:
PM-30
PM-60
PM-100
Frequency Response: 100Hz~10KHz ± 3dB
30Watts rms. less 3% THD. at IKHz AC 117V
60Watts rms. less 3% THD. at IKHz AC 117V
lOOWatts rms. less 3% THD. at IKHz AC 117V
1 -
Sensitivity and Impedance:
Mic Input; 3.0mV(-50dB)/50K ohm, O.SmV (-66dB)/600 ohm
Tape/Tuner, AUX Inputs: 1 OOmV (-20dB)/1OOK ohm
Phono Input: 55mV (-25dB)/500K ohm
Phone Input: IV (0dB)/600 ohm
Outputs:
Voltage and impedance:
PM-30 : 11V(4 ohm), 15.5V (8 ohm), 22V (16 ohm), 25V (21 ohm),
70V (163 ohm)
PM-60 : 15.5V(4 ohm), 22V(8 ohm), 31V(16 ohm), 25V(10.4 ohm),
70V (81.6 ohm)
PM-100: 20V (4 ohm), 28.3V (8 ohm), 40V (16 ohm), 25V (6.3 ohm),
70V (49 ohm)
Noise Level:
All volume control C.C.W
Microphone...............................................................................-55db below rated output.
Tape/Tuner, Phono, Phone, Aux
Tone Control:
Bass..........................................................................................
Treble
......................................................................................
.......................................................
....
........................................
-75db below rated output.
-65db below rated output.
±10dB at lOOHz
tlOdBatlOKHz
Indicators: 1-Power Lamp, 1-Overload Lamp (LED), 1-Output VU Meter
Protections: 1-AC Circuit breaker, 1-overload protector (Builded in)
Terminals: Screw terminals for all inputs/outputs.
Power Supply: 110-120V AC 50/60Hz
Power Consumption:
No Signal AC Source Rated Output AC Source
PM-30 15VA lOOVA
PM-60 32VA 200VA
PM-100 60VA 320VA
Ambient Temperature Range: 14°F to 140°F (-10°C to 60°C)
Weight: PM-30 PM-60 PM-100
6.0 Kg 9.5 Kg 11 Kg
13.2 lbs 20.9 lbs 24.2 lbs
Dimensions: (W x H x D)
PM-30 12.60" X 3.54" X 9.84" (320 X 90x250m/m)
PM-60 17.72 "x 4.92" x 11.22" (450 x 125 x 285 m/m)
PM-100 17.72" X 4.92" X 11.22" (320 X 125x285 m/m)
Accessories:
PM-30: Rack mount brackets.