Aiphone JA-2MCD, Ja-2hcd, JA-2MECD User Manual

JA-2MECD

Master monitor station(with Picture memory)

JA-2MCD

INSTALLATION & OPERATION MANUAL

HANDSFREE COLOR VIDEO INTERCOM

834571 1004 B

JA-2MECD JA-2HCD JA-2MCD

Master monitor station

JA-2HCD

Sub monitor station

- 2 -

General Prohibitions

General Precautions

Prohibitions to dismantle the unit

Prohibitions to subject the unit to water

WARNING

(Negligence could result in death or serious injury to people)

1. High voltage is present internally. Do not open the case. Electric shock could result.

2. Do not dismantle or alter the unit. Fire or electric shock could result.

3. Do not connect the unit with any non-specified power source. Fire or electric shock could result.

4. Keep the unit away from water or any other liquid. Fire or electric shock could result.

5. Do not put any metal into the unit through the openings. Fire, electric shock, or unit trouble could result.

6. When existing chime wires are used, it is possible that they contain AC voltage. Electric shock or unit damage could result. Ask a qualified technician.

CAUTION

(Negligence could result in injury to people or damage to property)

1. Do not put anything on or cover the unit with cloth, etc. Fire or unit trouble could result.

2. In case of electrical storms, unplug the unit from AC outlet. If not, fire or electric shock could result. (If AC cord is not seen, turn off the Power switch on the left side.)

3. If LCD is punctured, do not allow contact with the liquid crystal inside. Inflammation could result. If necessary, gargle your mouth and clean your eyes or skin with clear water for at least 15 minutes, and consult your doctor.

4. Do not install the unit in any of the following locations.Fire, electric shock,or unit trouble could result. * Places under direct sunlight, or near heating equipment that

varies in temperature. * Places subject to dust, oil, chemicals, * Places subject to moisture and humidity extremes, such as

bathroom,cellar, greenhouse, etc. * Places where the temperature is quite low, such as inside a

refrigerated areaor in front of air-conditioner. * Where noise generating devices such as dimmer switches,

invertor electrical products. * Places subject to steam or smoke (near heating or cooking

surfaces). * Where noise generating devices such as dimmer switches,

invertor electrical appliances, are closeby. * Places subject to steam or smoke (near heating or cooking

surfaces).

GENERAL PRECAUTIONS

1. The unit is for domestic use only. Do not use outdoors.

2. When power fails, the unit becomes inoperative.

3. The unit is for wall-mount use only. For desktop applications, use desk stand.

4. In areas where broadcasting station antennas are close by, the intercom system may be affected by radio frequency interference.

5. If the phone is operated near OA equipment, Radio or TV, they interactively influence by radio frequency interference. Carefully select both locations for installation and operation.

PRECAUTIONS

Package contents

1 JA-2MECD, JA-2MCD or JA-2HCD 2 Packet of screws 3 Optional function connector 4 Door release connector 5 Mounting bracket 6 INSTALLAITON & OPERATION MANUAL

PACKAGE CONTENTS

INSTALLATION

2-1

Installation locations

1. Do not mount the inside monitor station in areas directly facing bright lighting. Viewing image may be affected.

2. On the left side, the monitor station has a POWER switch. Secure a space of 50mm(2") or more between the unit and a wall or furniture.

JA-2MECD

JA-2HCD

JA-2MCD

50mm+

(2")

[1]

[2]

- 3 -

2-2

Wiring method

Wire the inside stations in a station-to-station (daisy-chained) manner.

MOUNTING

2-3

Cable

1. Use 2-conductor, non-shielded cable. Vinyl-jacketed cable with PE(polyethylene) insulated wires is recommended.

2. Never use loose wires, shielded wire, twisted pairs, or coaxial cable.

3. When using existing cable with multiple wires, terminate both ends of each unused pair with a 120 ohm resistor.

2-4

Wiring distance

1.0mm 100m 100m 100m

10m

100m

A A' B C D

18AWG

330' 330' 330'

33'

330'

0.65mm 50m 50m 50m

50m

22AWG

165' 165' 165'

16'

245'

100m

330'50m 165'

Mounting

[1] Screw (x4) [2] Mounting bracket [3] Two-gang box

• Provide a box DEEP enough to accommodate all cables incl. options.

[4] DIN rail

1. Depress UNLOCK button (to unlock or to insert the wire securely).

2. Insert the cable into terminal.

3. When GANG BOX is not provided, the cable can be surface run from the top or bottom of the unit. Cut open the cable inlet hole to run wires to the back of the unit.

JA-2MECD

JA-2MCD

JA-2MECD

JA-2MCD

JA-2MECD

JA-2MCD

JA-2SD

JA-DAC

B1, B2

JA-DAC

B1, B2

JA-2HCD

JA-2SD

JA-2HCD

JA-2SD

JA-2HCD

JA-2SD

JA-2HCD

JA-DAC

B1, B2

JA-2SD

JA-2HCD

JA-2SD

JA-2HCD

JA-DAC

JA-D

JA-2HCD

B1 B2

A1 A2

B1 B2

A1 A2

(x2)

A1 A2 A1 A2

120 120

JA-2MECD

JA-2MCD

JA-2MECD

JA-2MCD

JA-2HCD

JA-DAC

JA-D

PS-2420 PS-2410

IER-2

JA-2SD

ADAP

CAM

JAW-AZ

: motion detect sensor or sensor / camera

CAM

JA-2MECD

JA-2MCD JA-2HCD

PS-2420

PS-2420S

PS-2420UL

PS-2420DIN PS-2410DIN

83.5mm (3-5/16")

46mm

(1-13/16")

[3]

[2]

[1]

[4]

83.5mm (3-5/16")

[3]

[2]

9mm

(3/8")

- 4 -

WIRING

B1 B2

[5]

[6]

PS-2420

PS-2420DIN

[8]

[9]

[8]

[2]

100V-240V~

50/60Hz

230V AC

24V DC2A

24V DC

IN 230V~ 50/60Hz

PS-2410DIN

230V AC

24V DC1A

IN 230V~ 50/60Hz

EL-9S

[3]

JA-DJA-DAC

DC 24V

Motion detect

Camera

Motion detect

Camera

A I P

H O

E M K

[4]

A I P

H O

E M K

JA-2MECD

JA-2HCD

JA-2SD

JA-2MECD

JA-2HCD JA-2HCD

JA-2SD JA-2SD

OFF ON

SUB IN

SUB OUT

JA-2HCD

JA-2SD

IER-2

[7]

SUB IN

SUB OUT

ON - OFF

JA-DAC

B1 B2

[8]

[2]

JA-2HCD

L1 C1

L2 C2

[10]

RY-3DL JA-2MECD

DC24V

b1 b2 b3

PS24

YE(b2)

OG(b1)

OG: Orange YE: Yellow BR: Brown RD: Red

[1]

JA-2MECD

JA-2MCD

[8]

Adaptor

JAW-AZ

DC24V

++-

SUBMASTER

DOOR-1

DOOR-2

ADAPTER-1

ADAPTER-2

CALL EXT SPEAKER

RD(L1)

BR(L1)

YE(L2)

OG(L2)

OPTION

L1 L1 L2 L2

+ 8 hidden pages