Aiphone IAX-100, Iai-100, IME-100, IMU-100, IME-150 User Manual

...

- 1 -

0505 A

SECURITY WINDOW INTERCOM SYSTEM

IMU-100, IAI-100, IAX-100, IME-100, ISE-100, IME-150

INSTALLATION & OPERATION MANUAL

- 2 -

General Prohibitions

General Precautions

Prohibitions on Dismantling the Unit

Prohibitions on Subjecting the Unit to Water

WARNING

(Negligence could result in death or serious injury to people)

Do not dismantle or alter the unit as it could result in a fire or electric shock.

2. Do not connect the unit with any non-specified power source. Fire or electric shock could result.

Keep the unit away from water or any other liquid. If the unit gets wet a fire or electric shock could result.

Do not put any metal into the unit through the openings. Fire or electric shock could result.

5. Do not plug or unplug with wet hands. Electric shock could result.

6. Keep AC plug away from moisture or dust. Fire could result.

7. Keep AC cord from being marred or crushed. If the AC cord is fractured, fire or eletric shock could result.

8. Do not make the wires or DC output terminals shorted. Fire or electric shock could result.

CAUTION

(Negligence could result in injury to people or damage to property)

1. Before turning on power, make sure wires are not crossed or shorted. Fire or electric shock could result.

2. Mount the unit onto the wall in a place where it cannot be easily jarred or bumped by people. Injury could result.

3. Do not lay out the wires or make any connections while the power supply is turned on, as it could result in an electric shock or malfunction.

Do not install the unit where it will be subject to a large amount of vibration or shocks, as it could cause the equipment to fall over and cause an injury.

5. Do not install or use the unit in any of the following places, as it could result in a fire, electric shock or malfunction.

* Places in direct sunlight, or near heating equipment that varies in temperature. * Places exposed to metal particles, dust, oil or chemicals. * Places subject to moisture and humidity extremes, such as bathrooms, cellars or

greenhouses.

* Places where the temperature is quite low, such as inside a refrigerated area or in

front of an air-conditioner.

* Places directly exposed to steam or oily fumes, such as next to kitchen worktops

or heat appliances.

* Places exposed to noise from electric products, such as dimmer switches or

inverters.

6. On products with ground terminals, connect to an earth ground. Fire or malfunction could result.

7. For DC powered systems, use Aiphone power supply model specified with system. If non-specified product is used, fire or malfunction could result.

8. In case of electrical storms, unplug the unit from AC outlet. If not, fire or electric shock could result.

9. Do not put anything on or cover the unit with cloth, etc. Fire or unit trouble could result.

10.Do not have the weak currency wires pinched by windows, etc.

GENERAL PRECAUTIONS

1. This unit is for indoor use only. Do not use outdoors.

2. In areas where broadcasting station antennas are close by, the intercom system may be affected by radio frequency interference.

3. The unit turns inoperative during power failure.

4. The unit can be damaged if dropped. Handle with care.

5. As to other manufacturer's devices,such as sensor, detectors, door releases, used with this system, comply with the Specifications and Warranty conditions manufacturers or venders present.

6. If the unit is down or does not operate properly, unplug or turn off power switch.

7. If the phone is operated near OA equipment, Radio or TV,they interactively influence by radio frequency interference. Carefully select both locations for installation and operation.

8. Do not locate the control unit in a location with restricted access. It impedes maintenance inspection or repaires. Also, unit trouble could result.

PRECAUTIONS

English

PACKAGE CONTENTS

Package contents (main kit IMU-100)

1. Main unit MU-100

2. Mounting bracket

3. Screws for joining the main unit to the bracket (black) (x4)

4. Counter installation screws (x4)

5. Operation manual

6. Screwdriver for setting up

7. Operation unit OU-100

8. Connection cable (2 m)

English

1-1

MU-100

OU-100

- 3 -

1-2

1-3

1-4

English

Package contents (acoustic interface kit IAI-100)

1. Driver unit DR-100

2. Screws

3. Rubber seal

4. Acoustic I/O tube AI-100

5. Temporary installation jig

6. Tube fixer FF-100

7. Counter installation screw

English

Package contents (acoustic tube IAX-100)

1. Acoustic tube IAX-100

2. Tube connector

3. Packing (semi-transparent)

1-5

English

Package contents (sensor ISE-100)

Optional package

1. Sensor ISE-100

2. Screws

1-6

English

Package contents (optional microphone IME-150)

Optional package

• Optional microphone IME-150

English

Package contents (gooseneck microphone IME-100)

• Gooseneck microphone IME-100

DESCRIPTION

English

Description

This security window intercom system provides a means of communication for two people conducting business on either side of a security window,such as at a bank,theatre, or law enforcement facility.

Features

• A new acoustic tube system is used that combines an acoustic tube speaker with a noise canceling microphone. This ensures clear sound quality with sufficient volume.

• The use of the new acoustic tube system means that the unit can be installed without having to make a hole in the barrier glass. The acoustic tube is long and thin, ensuring that the field of vision between the operator and the customer is not obstructed.

• The circuit of the noise canceling microphone is built in to the acoustic tube system, lessening the effects of ambient noise and making sure the operator accurately hears the customer.

• The sound of the customer's voice is concentrated ensuring that nothing is misheard,and the voice of the operator is detected by the VOX circuit and transmitted automatically. This means that no operations are necessary during communication, making it a smooth and user-friendly system.

• When the operator leaves the booth or does not want voices from inside to be heard outside, the system can be put into standby mode by turning off the TALK switch so that sound is not transmitted.

• A volume switch is provided that can be changed from "Lo" to "Hi" when there is an increase in ambient noise or if a customer is hard of hearing.

• Option: A sensor is available that automatically switches the system to standby mode when there are no customers (automatic operation system).

• Option: There is a in-built paging function so that customers in outside waiting rooms can be easily called. A separate paging speaker must be installed for this function.

DR-100

AI-100

FF-100

132

- 4 -

Operator units

[1] Main unit MU-100

Position under the desk. Can be installed with the mounting bracket provided.

[2] Operation unit OU-100

Position on the left or right of the window desk, in a userfriendly location.

[3] Power supply adapter PS-2420UL/2420S

Position between the AC outlet and main unit in a location where it can be easily installed. Drill holes for wiring as needed before installing the units.

English

3-1

INSTALLATION

3-2

[1]

[2]

[3]

[6]

[1]

Cut

[2]

[4]

[5]

[7]

[3]

[6]

[4]

[5]

[7]

[8]

[9]

- 5 -

English

Acoustic interface

[1] Center of acoustic I/O tube [2] Customer [3] Barrier glass [4] Upper acoustic tube (2) [5] Upper acoustic tube (1) [6] Acoustic I/O tube [7] Lower acoustic tube [8] Driver unit [9] Tube fixer

Estimate the average height of customers, taking into account gender and age differences. Mark on the glass the height where the average customer's head would be during a conversation with the operator. Customers usually bend down a little when they talk.

• Recommendation: 130cm (51") above the floor

• If voices can pass directly through the cash tray opening, this can

be used for communication with customers who are children. If the window has such an opening, children can be excluded from the average height estimate.

2. Referring to the diagram, measure the vertical dimension of the barrier glass of the booth in the area where you intend to install the tubes, and decide how many acoustic tubes are necessary.

• At least one acoustic I/O tube must be used.

• The total length of the acoustic tube is 1m (3'3"), and it must be

installed on both the upper and lower sides of the acoustic I/O tube. It is possible to cut the acoustic tube and use the pieces above and below the acoustic I/O tube.

The position measurements you have made will be used

during installation, so be sure to record them.

3. Determine the position on the exterior of the barrier glass.

•The optimum position is with the center of the acoustic I/O tube

at the height of the customer's mouth, and 300mm to 400mm (12"to 16") to the right or left.

•Install the driver unit in the position where the glass and ceiling

meet (sash).

•Install the acoustic tube vertically on either the left or right side

of the customer, whichever is more appropriate.

•Be sure to install the tube not just simply by attaching it to the

glass, but also by using the screws to fix it to the ceiling at the top and the counter at the bottom.

1. If liquid or moisture gets into the acoustic tube it could result in a malfunction, so select the installation position carefully.

2. The sections below the driver unit (acoustic tube, acoustic I/O tube) are water-resistant. Even so, do not directly spray them with water, as it could result in a malfunction.

3-3

English

Outer microphone/speaker

The system can be used with an optional microphone and external speaker if the acoustic interface kit and acoustic tube are not installed. [1] Optional microphone IME-150 [2] External speaker

•Use one optional microphone. The optimum position is at the height of the customer's head, and 300mm to 400mm (12"to 16") to the right or left. It is recommended that the microphone be installed on the vertical mullion of the window.

•Use one external speaker. Install above the head of the customer in a position where the sound can be clearly heard. Use a type of speaker suitable for your needs.

Impedance: 4 to 8 Ω Rated input: 3 W or more Maximum input: 6 W or more

•Lay out the wires within the mullion, or use a raceway.

1. If liquid or moisture gets into the microphone it could result in a malfunction, so select the installation position carefully.

2. The optional microphone is not water-resistant.

[1]

[2]

[1]

- 6 -

4-1

English

Main materials and tools

1. Main materials

•Double-sided tape Select a tape suitable for your usage environment. Recommendation: 4910 (made by 3M) If you are using the acoustic tube system, cut a piece of tape

approximately 50cm (20") longer than the total length of the tubes.

If you are using the optional microphone, cut a piece of tape

approximately 10cm (4") in length.

•Connection cable Use a 2-conductor shielded cable for the microphone, and an

18AWG cable for the speaker. The cables should be long enough to extend from the microphone and speaker to the main unit.

•Cleaning fluid Fluid for cleaning the surface before adhesion (a fluid that will

not affect the adhesive power of the double-sided tape).

2. Special tools

• Metal saw

Use for cutting the acoustic tube.

• File

Use to smooth the cut surfaces of the acoustic tube.

MOUNTING

4-2

440

11mm

[2]

[1]

[2]

[1]

[3]

[4]

[5]

White

Shield

Red

[6]

[7] [8]

[9]

[6]

+ 14 hidden pages