" CHIME TONE INTERCOM
Type; 1 door — 1 room
83321300 11925
O AlPHONE
V
INSTRUCTIONS
NAMES AND FUNCTIONS
Handset ■
Model;
IE- 1AD(U)
HU
fill
Door release button
Chinne tone
volume control
(Room master station)
Mounting accessories;
~iooor
Screw (X 2)
(for mounting to
electrical box)
-r-|_
Wall-mounting
Wood screw (x 2)
(for mounting to
wall surface)
bracket
J
IE-1AD(U)
FEATURES
lE-lAD(U) is a Chime Tone Intercom room master station for
system with one each room station and door station (IE series).
For power supply, a bell transformer can be used for both
communication and door release (Example; when EL-9S is used,
select a bell transformer of AC12-16V, 450mA or more).
A power supply (DC12 ~ 24V, 160mA or more) may also be used
only for conununication.
Thin and compact body design, matching interior decor.
4-stroke chime for doorstation call-in.
Simply pick up handset to reply to the caller.
Door release button on room station.
Adjustable chime call volume.
Optional call extension speaker.
- 1 -
BEFORE YOU INSTALL AND OPERATE THE EQUIPMENT
— Prohibitions and precautions —
Operation;
DO NOT HOLD HOOK SWITCH DOWN WHILE PICKING UP HANDSET. THE CHIME TONE
SOUNDS THROUGH THE HANDSET RECEIVER ELEMENT AND COULD CAUSE HEARING
DAMAGE.
Installation;
* DO NOT CONNECT ANY TERMINAL ON ANY UNIT TO AC POWER LINES.
When you mount lE-lAD(U) unit in place of existing bell or chime, be sure to disconnect wires
from the present transformer.
* BE SURE TO DISCONNECT WIRES FROM BELL TRANSFORMER (or POWER SUPPLY)
BEFORE YOU OPEN THE lE-lAD(U) UNIT OR MAKE WIRING CONNECTIONS.
* Avoid running the connecting wires through doors, windows or between furniture, which may pinch
and disconnect the wires.
* lE-lAD(U) equipment must be installed in as dry and dust-free environment as possible.
Maintenance;
* Clean your lE-lAD(U) equipment with a soft cloth dampened with neutral household cleanser. Never
use thinner, lacquer or benzine, etc.
* Do not splash water on the door station by hose, etc.
SYSTEM COMPONENTS
NEVER
NEVER
IE-1AD(U
\ M ‘
.! i ‘
lE-NC
lE-JA
y:
IE-DL3
Notes; Your lE-lAD(U) can not work with IB/IC/ID series door stations. As to call extension, ICR-1 can be included in
lE-lAD(U) system.
INSTALLATION
3
[ (1) Actual terminal location;
Room station;
lE-lAD(U) ; Room master station. Wall-mount.
Door stations (one per system);
lE-FY
IER-2
IF-DA : with brown plastic cover (surface-mount).
lE-DC ; - do - (surface-mount).
lE-NC : - do - (semi-flush mount).
lE-JA : with stainless steel cover (flush-mount).
lE-FY : with aluminum cover (flush-mount).
lE-DLl : 1-call, with brown anodized aluminum cover (surface-mount).
IE-DL2 : -do-2-call.
IE-DL3 : -do- 3-call (each with illumination lamp).
Options;
IER-2 : Call extension speaker, with volume control.
EL-9S ; Door release. AC 12V, 0.35A. Requires a separate bell transformer.
S
EL-9S
For power supply.
Connect to door station (non-polarized).
CASE & CHASSIS INSIDE VIEW
For electric door release.
For cal! extension
(non-polarized)
(1) Remove 2 screws on back of the chassis and separate front case and chassis.
(2) As shown, take out two WHITE wires thru a hole on the chassis.
(3) Connect 2 wires to the wires from the IER-2 (non-polarized).
- 2 -
(2) Wail-mounting installation;
IF-DA IE-DC(
MAIN UNIT
SCREW
lE-NC
MAIN UNIT
SCREW (2)
*Master stations; Attach the mounting bracket to wall or single-gang box with the supplied wood screws or screw's. Insert the prongs o
SCREW (2) BACK FRAME
TERMINALS
Surface mount
> .SINGLE
GANG BOX
% -
83.5 mm
Semi-flush mount
SINGLE
GANG BOX
-'r
83.5 mm
(3-5/16")
'BRACKET
lE-JA
FRONT PANEL
lE-FY
MAIN UNIT
WOOD SCREW (2) Flush-mount
Flush-mount
.^2-GANG BOX
r
TERMINALS
BACK BOX
183.5 mm
(3-5/16")
the bracket into the holes of the body and pull the body downward. Be careful not to attach the bracket upside down.
* Door station; (*) When mounting to wall directly, remove the outlet part (*) on top or bottom of back frame to pass cable.
(**) Illustrates IF-DA's, and lE-DC mounts in the same manner.
WIRING DIAGRAIVI
a
(1) Bell transformer for both communication and door release; AC 12-16V, 450mA or more (when EL-9S is used).
AC 12-16V, 700mA or more (when door release of other manufacture is used).
(2) Door release; Use a door release EL-9S (AC 12V, 350mA) or other manufacture’s which does not exceed AC 12-16V
500mA, when powered by a system’s bell transformer.
(3) Locate a system’s power supply within a lOm/33’ distance from main room station, using 0.65 mm dia./22AWG wires.
SPECIFICATIONS
2
Power source; lE-lAD(U); Powered by a bell transformer AC 12-16V, 180mA OR a power supply DC 12-24V, 160mA.
Current consumption; Max. 180mA (AC 12-16V). Max. 160mA (DC 12-24V).
Calling; 4-stroke electronic chime (w/slide volume switch).
Wiring; 2 wires (to door station) (non-polarized)
2 wires (to door release) (must be separated from communication's cable).
Door release button contact capacity; DC/AC 24V, 0.5A.
Wiring distance; *Between lE-lAD(U) & door station;
AWG
Distance
Diarneter 0.5 mm 0.65 mm 0,8 mm 1.0 mm
Distance
Dimensions; (H x W x D) 210 x 80 x 58 (mm); 8-1/4" x 3-1/8" x 2-5/16"
Weight; Approx. 450 g (1 lb.).
24AWG
300'
90 m 150 m 230 m 360 rn
22AWG 20AWG 18AWG
500' 750' 1,180’
— 3 -
OPERATION
flL-
2. & 3.
HIGHER
1. Communication;
At door station;
Momentarily depress CALL button. After room station replies, talk handsfree.
At room station;
Incoming call is announced by 4-stroke chime at lE-lAD(U) and IER-2, if installed. To reply, simply pick up handset at
lE-lAD(U). After communication, hang up handset onto its cradle properly.
LOWER
2. To operate door release;
While holding handset, depress and hold DOOR RELEASE button on lE-lAD(U). The visitor may open the door while buzzing
sound is heard.
3. Monitoring door station;
Pick up handset and you can monitor the door station.
4. To adjust chime volume;
Adjust chime volume as desired by the slide switch on lE-lAD(U), according to the room conditions.
The chime volume at IER-2 can be changed separately by the switch provided.
WARRANTY
Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of
one year after delivery to the ultimate user and will repair free of change or replace at no charge, should it become defective
upon which examination shall disclose to be defective and under warranty. Aiphone reserves unto itself the sole right to make
the final decision whether there is a defect in materials and/or workmanship; and whether or not the product is within the
warranty.
This warranty shall not apply to any Aiphone product which has been subject to misuse, neglect, accident, or to use in violation
of instructions furnished, nor extended to units which have been repaired or altered outside of the factory.
This warranty does not cover batteries or damage caused by batteries used in connection with the product.
This warranty covers bench repairs only, and any repairs must be made at the shop or place designated in writing by Aiphone.
Aiphone will not be responsible for any costs incurred involving on site service calls.
Aiphone Co., Ltd., Nagoya, Japan
COMMUNICATION SYSTEMS
Aiphone Corporation, Bellevue, WA, USA
0 AIPHONE
1E-1AD(U)-I(E)1192D
4 -
HOME, BUSINESS, INDUSTRY.
Printed in Japan (E)
Loading...