AIPHONE GTDBVN Users Manual

GT SYSTEM

Entrance station (modular type)

Entrance station (all-in-one type)

Guard station

OPERATION MANUAL

Entrance station (modular type)

Entrance station (all-in-one type)

Guard station

ZOOM

ADJUST

WIDE

Thank you for selecting Aiphone for your communication needs. Please read this manual carefully before installation, and keep this in a safe place for future reference.

Please note that images and illustrations depicted in this manual may differ from the actual product.

PRECAUTIONS

Prohibited

Do not dismantle unit

WARNING

(Negligence could result in death or serious injury.)

1. Do not dismantle or alter the unit. Fire or electric shock could result.

2. Do not put any metal and ﬂ ammable material into the unit through the openings. Fire, electric shock, or unit trouble could result.

3. Keep the unit away from water or any other liquid. Fire or electric shock could result.

4. During an electrical storm, do not touch the unit. Electric shock could result.

5. If there is any smoke, unusual odor, or abnormal sound, or if you drop or damage the unit, turn off the system power breaker immediately. Fire or electric shock could result.

6. Do not use power supply with a voltage other than speciﬁ ed. Fire or electric shock could result

7. Do not use the unit in/under following locations/conditions. If not observed, it may result in noises or malfunctions.

• Where use of the unit is prohibited, such as in a hospital

• Near an electric medical equipment (e.g. operating rooms, ICU, or

CCU)

• Near automatic control equipment such as auto doors or ﬁ re-alarm

boxes

• In the area within 15cm from a cardiac pacemaker

CAUTION

(Negligence could result in injury to people or damage to property.)

1. Do not put anything on or cover the unit with cloth, etc. Fire or unit trouble could result.

2. Do not apply high pressure on the screen. If fractured, injury could result.

3. If the LCD is punctured, do not touch the liquid crystal inside. Inﬂ ammation could result. If contact should occur, ﬂ ush or rinse area with water thoroughly and consult your doctor.

4. Be sure to perform a call test with the handset on the hook. If you operate the hook switch with the handset on your ear, a sudden call etc. may arrive causing damage to your ear.

5. Do not place your ear near the speaker during use. An unexpected loud sound could cause hearing damage.

6. When cleaning the wall with a high-pressure water sprayer, be careful not to spray on the entrance station. If not observed, it may result in ﬁ re or electric shock.

Keep unit away from water

Be sure to follow the instruction

Notice

• We will under no conditions be liable for any damages or losses resulting from this product's contents or speciﬁ cations.

• We will under no conditions be liable for damage occurring due to the inability to communicate due to malfunctions, problems, or operational errors in this product.

• The unit is inoperative during power failure.

• This system is not intended for life support or crime prevention. It is just a supplementary means of conveying information. Aiphone will under no conditions be liable for loss of life or property which occurs while the system is being operated.

• In areas where broadcasting station antennas are close by, this system may be affected by radio frequency interference.

• Please note the LCD panel, though manufactured with very high precision techniques, inevitably will have a very small portion of its image elements always lit or not lit at all. This is not considered a unit malfunction.

• The unit may get slightly warm, but this is not a malfunction.

• During communication, if you speak before the other person has ﬁ nished talking, your voice may not come through clearly. Conversation will proceed smoothly if you speak when the other person has ﬁ nished talking.

• The entrance station is intended to be mounted on a wall only. It cannot be used on a desktop.

• Available functions and services are limited according to the speciﬁ cations of the installed system.

• If you speak in a ﬁ xed tone, the noise-cut function may judge it to be a noise and cut the transmission, but this is not a malfunction.

• Using a mobile phone or professional-use radio equipment such as walkietalkie close to the system may cause a malfunction.

• Warm-color lighting shining on the camera may change the tint of the image on the screen.

• The outline of video images displayed may differ from that of the actual person(s) or background, but this is not a malfunction.

• When the unit’s screen is illuminated with strong light, the image looks white or silhouetted. But this is not a unit trouble.

• When outside temperature lowers sharply after rainfall, etc., the inside of the camera may fog up slightly, causing a blurry images, but this is not a malfunction. Normal operation will be restored when moisture evaporates.

• When using a ﬂ uorescent light that shines around the camera, the screen colors may variously change (color rolling), but it is not a malfunction.

• If the entrance station freezes during winter time, the picture may become difﬁ cult to see or the buttons of the entrance station may not operate.

General Precautions

1. Keep the unit more than 1 m (3.3') away from radio or TV set.

2. Keep more than 20 cm (7-7/8") away from other radio equipment, for example ﬂ oor heating controller, wireless router or cordless telephone, etc. It may cause unwanted noise and video distortion.

3. Talk within 30 cm (12'') from this unit. If you are too far away, it may be difﬁ cult to hear audio.

4. When installing and using this unit, protect subject's privacy, portrait rights, etc. on your own responsibility.

5. As to other manufacturer's devices (such as sensor, detectors, door releases) used with this system, comply with the Speciﬁ cations and Warranty conditions that the manufacturers or venders present.

6. Avoid using this unit in places under direct sunlight. If it is unavoidable, block out light during use.

7. When putting a hearing aid into T-mode and approaching the unit, the intercom system may be affected by radio frequency interference etc., depending on the installation environment.

8. Please receive and retain all conﬁ guration data from the supplier. If you lose the conﬁ guration data, there are cases where maintenance and after-sales service calls may incur additional setup fees.

10. The area to be monitored by the sensor should be free of obstacles such as ornamental plants.

- 2 -

Table of Contents

PRECAUTIONS ...........................................................2

READ THIS BEFORE USING THE STATIONS

1 SYSTEM CONFIGURATION ........................................ 4

2 NOTES ABOUT USING THIS MANUAL .................... 5

ENTRANCE STATION

1 PART NAMES AND FUNCTIONS ............................... 6

1-1 Entrance station (modular type) ................................. 6

1-2 Entrance station (all-in-one type) ............................... 7

1-3 Indicators .................................................................... 8

2 OPERATIONS ................................................................. 9

2-1 Calling a resident/tenant or guard station .................. 9

Calling with the call switch module....................... 9

Calling with the name scrolling module ................ 9

Calling with the 10 key module ........................... 10

Calling with the all-in-one type entrance station

(GT-DMB-LVN/GT-DMB-N) .............................. 12

2-2 Door release ............................................................. 16

2-3 Other ........................................................................ 16

7 OTHER OPERATIONS ................................................ 45

7-1 Checking for missed calls and calling back .............45

7-2 Receiving an emergency call ................................... 46

8 SETTING........................................................................ 48

8-1 Adjusting display brightness and volumes ............... 48

8-2 Switching to reception mode ................................... 50

8-3 Switching to program mode ..................................... 51

9 UPDATING RESIDENT INFORMATION .................. 52

FOR PROPER USE OF THIS STATION

1 TECHNICAL PRECAUTIONS .................................... 53

2 SPECIFICATIONS ........................................................ 54

3 SOFTWARE LICENSE ................................................56

4 REGULATIONS ............................................................ 57

5 WARRANTY ..................................................................58

GUARD STATION

1 PART NAMES AND FUNCTIONS ............................. 17

1-1 Operation panel ........................................................17

1-2 Indicators .................................................................. 18

1-3 LCD (display) .......................................................... 19

1-4 Button operations ..................................................... 20

2 RECEIVING A CALL ................................................... 22

2-1 Receiving a call ........................................................ 22

3 CALLING (from a tenant building) ......................... 23

3-1 How to search for a unit to call

(from a tenant building) ........................................... 23

3-2 Calling a unit (residential/tenant station)

or guard station ........................................................ 24

3-3 Calling an entrance station ....................................... 29

4 CALLING (from a main building) ............................ 31

4-1 How to select a unit to call

(from a main building) ............................................. 31

4-2 Calling a room (residential/tenant station)

or guard station ........................................................ 32

4-3 Calling an entrance station ....................................... 37

5 OPERATIONS DURING COMMUNICATION .......... 39

5-1 Transferring a call .................................................... 39

5-2 Door release ............................................................. 39

5-3 Operating an optional device ................................... 40

5-4 Viewing and adjusting video at an entrance

station ....................................................................... 41

6 MONITORING ............................................................... 43

- 3 -

READ THIS BEFORE USING THE STATIONS

SYSTEM CONFIGURATION

The GT system consists of up to 8 main buildings and 24 tenant buildings.

Main building: A control section that functions as a main entrance, guard station, security center, administration ofﬁ ce, etc. A main building includes no residential/tenant stations. You can call up all of the residential/tenant stations and guard stations from an entrance station or guard station in the same system (site). * A station that is not programmed cannot be called. * Modular type entrance stations cannot be installed in a main building. Only all-in-one type can be used.

Tenant building: A section of collective housing. A tenant building includes residential/tenant stations, entrance stations and guard stations. You can call up all of the residential/tenant stations and guard stations from an entrance station in the same tenant building. However, you cannot call stations in another tenant building.

Example

: A system (site) consisting of 1 main and 3 tenant buildings

Residential/tenant stations

Entrance station (modular type)

GT-2C-L/GT-2C (GT-2H-L/GT-2H)

Guard station

GT-MKB-N

GT-1C7-L/ GT-1C7

Entrance station (all-in-one type)

GT-DMB-LVN/ GT-DMB-N

GT-1M3-L/ GT-1M3

Tenant building

GT-1A

GT-1D

Tenant building

Entrance station (all-in-one type only)

GT-DMB-LVN/ GT-DMB-N

Tenant building

Main building

(administration ofﬁ ce)

Guard station

GT-MKB-N

- 4 -

READ THIS BEFORE USING THE STATIONS

Coverage of calling, communication and monitoring

The following table shows the coverage of calling, communication, and monitoring from a tenant building and a main building.

NOTE: Performance depends on the settings. If you cannot call even when ✓ is indicated, its setting is not conﬁ gured.

Incoming call

Same tenant building Other tenant buildings Same main

building

Other main buildings

Tenant building

Main building

Outgoing call

✓ : Possible — : Impossible

Entrance st. Calling/

Guard st. Calling/

Entrance st. Calling/

Guard st. Calling/

communication

communication Monitoring

communication

communication Monitoring

Entrance st.

Guard st.

✓✓ ✓

✓

✓✓ ✓ ✓✓ ✓ ✓✓✓✓

✓

✓✓

---------

✓✓

About the term "building" and "section":

The term "section" is used on the setting screens of entrance stations and guard stations instead of "building". "Section" and "building" have the same meaning in this manual.

Residential/ tenant st.

e.g. e.g.

Entrance st.

Guard st.

Residential/ tenant st.

Entrance st.

Guard st.

Entrance st.

-- - ----

-- -

✓

Setting screen of guard station

CALLING METHOD

NAME / # SEARCH SECT LIST+UNIT # UNIT NUMBER SECT # + UNIT #

✓✓

Standby screen of guard station

✓✓✓✓

✓

BUILDING #

UNIT #

✓

Guard st.

✓

NOTES ABOUT USING THIS MANUAL

This manual describes how to use the entrance stations and guard stations. The use of them differs depending on the building/section (main or tenant) where they belong. This manual uses the following icons to separate descriptions for the main and tenant buildings.

Icon Meaning

Main building/section

Tenant building/section

- 5 -

ENTRANCE STATION

1-1

PART NAMES AND FUNCTIONS

Entrance station (modular type)

Illuminator LED

Audio module

GT-DB-VN

(VIGIK and NFC capable)

GT-DB-V

(VIGIK capable)

GT-DB

Microphone

IN USE LED (orange)

Call indicator (orange)

Talk indicator (orange)

Door release indicator (green)

NFC reader

Camera

Speaker

Camera module

GT-VB

Name scrolling module

GT-NSB

Display

Back search button (or move the cursor to the left)

Forward search button (or move the cursor to the right)

Call button (or set and move forward)

Cancel button (or back)

10 key module

GT-10K

10-key (0 to 9,

, #)

[Combination examples]

Audio only, Direct select type (8 stations)

GT-DB(-V, -VN) + GT-DBP

GF-BP

Audio only, 10 key type

GT-DB (-V, -VN) + GT-DBP

GT-NSB +

GT-10K + GF-10KP

GT-NSP-L

GT-VB + GT-VP

GT-DB (-V,-VN) + GT-DBP

GT-SW + GF-4P

Audio/video, 10 key type

Call switch module

GT-SW

Call button

Directory card

Audio/video, Direct select type (8 stations)

GT-VB + GT-VP

GT-DB(-V, -VN) + GT-DBP

GT-NSB + GT-NSP-L

GT-10K + GF-10KP

GT-VB + GT-VP

GT-DB (-V, -VN) + GT-DBP

GT-SW + GF-4P

Audio/video, Direct select type

GT-NSB + GT-NSP-L

GT-SW + GF-4P

- 6 -

ENTRANCE STATION

1-2

Entrance station (all-in-one type)

All-in-one entrance station

GT-DMB-N

(NFC capable)

Talk indicator (orange)

Call indicator (orange)

Door release indicator (green)

Camera

Speaker

10-key (0 to 9, , #)

Microphone

Illuminator LED

Display

IN USE LED (orange)

NFC reader

Back search button (or move cursor to the left)

Forward search button (or move cursor to the right)

Cancel button (or back)

Call button (or set and move forward)

Sensor (If the sensor detects an object, the display will be illuminated.)

All-in-one entrance station

GT-DMB-LVN

(VIGIK and NFC capable, Hearing aid compatible)

Each part and indicator are the same as GT-DMB-N except as shown below (VIGIK).

VIGIK (available in France)

- 7 -

ENTRANCE STATION

1-3

Indicators

122

Indication patterns

Indicator

Status

Entrance station (modular type) Entrance station (all-in-one type)

5 Display

1 IN USE LED

(orange)

2 Call

indicator

3 Talk

indicator

4 Door

release indicator

Standby Off Off Off Off

System in use

Lit

Call Off

Communication Off Off

Releasing a door Off Off

Off Off Off

Lit

Off Off

Lit

(*1)

Off

(*2)

Monitoring Off Off Off Off

Communication is on hold

Lit

(*1): Lit when door release is activated during call. (*2): Lit when door release is activated during communication. (*3): The display differs depending on the settings.

Off Off Off

Off

Lit

(*1)

(*2)

W E L C O M E

I N U S E

C A L L I N G S M I T H

I N C O M M U N I C A T I O N

D O O R O P E N

W E L C O M E

O N H O L D

(*3)

- 8 -

ENTRANCE STATION

OPERATIONS

: Main building/section : Tenant building/section

2-1

Calling a resident/tenant or guard station

Calling with the call switch module

1 Press the call button for the unit to be called.

Calling with the name scrolling module

■ Searching for a unit by scrolling the list

1 In standby mode, press and to display the

target unit # and resident name.

The call indicator will light up and you will hear a call tone.

* Audio guidance will be heard depending on

the settings.

When the call is answered

Communication starts and the talk indicator lights up.

* Audio guidance will be heard depending on the settings.

When the door is released

The door release indicator lights up.

* Audio guidance will be heard depending on the settings.

101 SMITH

* Depending on the settings, only the resident name may be

displayed.

* The list is displayed in order of either unit # or resident name.

2 Press .

The call indicator will light up and you will hear a call tone.

* Audio guidance will be heard depending on

the settings.

When the call is answered

Communication starts and the talk indicator lights up.

* Audio guidance will be heard depending on the settings.

- 9 -

When the door is released

The door release indicator lights up.

* Audio guidance will be heard depending on the settings.

ENTRANCE STATION

Calling with the 10 key module

■ Searching for a unit by entering the unit #

1 In standby mode, enter the numbers using [0] to

[9] on the 10-key to display the target unit # and resident name.

101 SMITH

2 When the target unit # and resident name is

displayed, press .

The call indicator will light up and you will hear a call tone.

* Audio guidance will be heard depending on

the settings.

* If there is no relevant unit #, "NO ENTRY" is displayed.

NO ENTRY

* When the residential/tenant station that has been called is in

use, the IN USE LED lights up to indicate that the residential/ tenant station cannot be called. (In an expanded system, there may be a case that a residential/ tenant station cannot be called even if the IN USE LED is off.)

■ Searching for a unit by entering resident name

10-key

1 In standby mode, press on the 10-key.

2 When "ENTER A LETTER" is displayed, enter a

letter using the 10-key to display the target unit # and resident name.

The number and resident name for the unit whose initial corresponds to the entered letter will be displayed.

(e.g.) Enter "S".

101 SMITH

* Pressing or searches for the next unit # and resident

name.

* Depending on the settings, only the resident name may be

displayed.

* When the unit # is set to not be displayed, a letter can be

entered without pressing

* If there is no relevant resident name, "NO ENTRY" is

displayed.

NO ENTRY: S

NOTES:

• Pressing or for approximately 2 seconds will display

resident names in succession.

• If both unit # 111 and 1111 exist, the resident name for unit

111 will be displayed when 1, 1, 1 is entered, and the resident name for unit 1111 will be displayed if 1 is entered one more time.

• Stations can be set to display in order by unit #. (The order

starts with the lowest digit from 0 to 9 and then the order goes by letter.) In cases where unit # such as A101, A201, A901, A1001, and B101 exist, the order starts with the lowest digit and goes in the order A101, A201, A901, B101, A1001.

When the call is answered

Communication starts and the talk indicator lights up.

* Audio guidance will be heard depending on the settings.

When the door is released

The door release indicator lights up.

* Audio guidance will be heard depending on the settings.

- 10 -

ENTRANCE STATION

3 When the target unit # or resident name is

displayed, press

The call indicator will light up and you will hear a call tone.

* Audio guidance will be heard depending on the

settings.

When the call is answered

Communication starts and the talk indicator lights up.

* Audio guidance will be heard depending on the settings.

When the door is released

The door release indicator lights up.

* Audio guidance will be heard depending on the settings.

- 11 -

ENTRANCE STATION

Calling with the all-in-one type entrance station

GT-DMB-LVN/GT-DMB-N

The following diagram shows the screen transitions starting from the standby screen. One of the standby screens shown below is preset to this station. Find the standby screen of this station from

to E below and conﬁ rm the transition from it, and refer to the designated page for the

calling operation.

NOTE:

If "NO ENTRY" is displayed on the screen, press .

Standby screen

Display OFF (black)

10-key/

Greeting message Picture

WELCOME

10-key/

* Depending on the setting,

the screen turns on automatically when you get closer to this station.

/ Turned on automatically

QUICK LIST

INFORMATION

101 SMITH 102 AIPHONE 103 DENTIST 201 LAINE

NUMBER

ALPHA

10-key/

Call operation screen

NAME / # SEARCH

HOW TO CALL

1. SELECT UNIT

2. CALL

NUMBER

UNIT LIST

101

SMITH

CALL CANCEL

ALPHA

10-key

UNIT NUMBER

HOW TO CALL

1. ENTER UNIT #

2. CALL

10-key 10-key

ENTER UNIT #

UNIT #

ALPHA

CALL CANCEL

SECT LIST +

UNIT#

HOW TO CALL

1. BUILDING LIST

2. SELECT

3. ENTER UNIT #

4. CALL

BUILDING LIST

CENTRAL TOWER

SELECT CANCEL

To the next page

( C is available in a tenant building/section only.)

SECT# + UNIT#

HOW TO CALL

1. ENTER

BLDG. #

2. SELECT

3. ENTER UNIT #

4. CALL

ENTER BUILDING #

BUILDING #

ALPHA

ENTER CANCEL

To the next page

- 12 -

To the next page

ENTRANCE STATION

Conﬁ rming the target unit in the quick list

Unit # and resident names frequently called are preset to be displayed in the quick list.

* Up to 4 units can be displayed.

INFORMATION

Unit #

Resident name

101 SMITH 102 AIPHONE 103 DENTIST 201 LAINE

NUMBER

ALPHA

1 In standby mode, press and to display the

target unit, or 10-key to change the standby screen.

The "UNIT LIST" screen B or "ENTER UNIT #" screen C is displayed.

Entering unit #

NOTE: Entering unit # can only be performed on this screen.

Entering resident name is not possible.

HOW TO CALL

1. ENTER UNIT #

2. CALL

When the target unit number is numerals

only

1 In standby mode, enter numbers using [0] to [9]

on the 10-key to display the target unit #.

* The 10-key can be used even after pressing or .

ENTER UNIT #

UNIT #

ALPHA

CALL CANCEL

* Depending on the system, only the resident name may be

displayed.

* If you have entered a wrong number, press to return to

standby mode.

2 Follow the operating procedure of either

or C

depending on the displayed screen.

is available in a tenant building/section only.

Searching for a unit in the unit list

HOW TO CALL

1. SELECT UNIT

2. CALL

NUMBER

ALPHA

1 In standby mode, press and or 10-key to

display the target unit # and resident name.

UNIT LIST

101

SMITH

CALL CANCEL

The 10-key can be used to enter unit #, or by pressing , then the 10-key can be used to enter letters (resident name).

* Depending on the settings, only the resident name may be

displayed.

* The list is displayed in order of either unit # or resident name. * If you have entered a wrong number, press to return to

standby mode.

2 When the target unit is displayed, press .

The target unit is called.

* Refer to "When the target unit is successfully called"

at the end of

for details.

2-1

2 When the target unit # is displayed, press .

The target unit is called.

* Refer to "When the target unit is successfully called"

at the end of

for details.

2-1

When the target unit number is alphanumeric

1 In standby mode, press on the 10-key.

* The 10-key can be used even after pressing or .

ENTER UNIT #

UNIT #

NUMBER ALPHA

CALL CANCEL

2 Enter letters using the 10-key to display the

target unit #.

* Refer to the next page for how to enter letters.

3 When the target unit # is displayed, press .

The target unit is called.

* Refer to "When the target unit is successfully called"

at the end of

- 13 -

for details.

2-1

ENTRANCE STATION

How to enter letters

(e.g.) Entering "CATHY"

1. To enter "C", press

2. Press

once.

(*1)

three times.

3. To enter "A", press once.

4. To enter "T", press

5. To enter "H", press

6. To enter "Y", press

(*1): This step is needed for entering different letters with the same

key sequentially.

once.

twice. three times.

To enter a special character

, : Press once.

- : Press . : Press / : Press Space : Press Æ : Press Ø : Press Å : Press

* If you have entered a wrong letter, press to return to

standby mode.

twice.

three times.

four times.

ﬁ ve times.

six times. seven times. eight times.

Searching for a building in the building list

and entering unit #

HOW TO CALL

BUILDING LIST

2.SELECT

3.ENTER UNIT #

4.CALL

1 In standby mode, press and to display the

target building number and name.

BUILDING LIST

CENTRAL TOWER

SELECT CANCEL

2 When the target building is displayed, press .

3 Enter numbers or letters using the 10-key to

display the target unit #.

* For entering numbers or letters, follow steps 1 and 2 of

- "When the target unit number is numerals only"

"When the target unit number is alphanumeric".

ENTER UNIT #

CENTRAL TOWER UNIT # 101

CALL

ALPHA

4 When the target unit # is displayed, press .

The target unit is called.

* Refer to "When the target unit is successfully called"

at the end of

for details.

2-1

- 14 -

ENTRANCE STATION

Entering a building # and unit #

HOW TO CALL

2.SELECT

3.ENTER UNIT #

4.CALL

ENTER BLDG#

When the target unit is successfully called

The call indicator will light up and you will hear a call tone.

* Audio guidance will be heard depending on the settings.

1 In standby mode, enter numbers or letters using

the 10-key to display the target building.

* For entering numbers or letters, follow steps 1 and 2 of

"When the target unit number is numerals only"

"When the target unit number is alphanumeric".

ENTER BUILDING #

BUILDING #

ALPHA

ENTER CANCEL

2 When the target building number is displayed,

press .

3 Enter numbers or letters using the 10-key to

display the target unit #.

* For entering numbers or letters, follow steps 1 and 2 of

"When the target unit number is numerals only"

"When the target unit number is alphanumeric".

ENTER UNIT #

BUILDING # 01 UNIT # 101

CALL

ALPHA

When the call is answered

Communication starts and the talk indicator lights up.

* Audio guidance will be heard depending on the settings.

When the door is released

The door release indicator lights up.

* Audio guidance will be heard depending on the settings.

NOTES:

• If "DENIED" is displayed or returns to standby mode,

the entered unit #/resident name is not registered.

• Enter the target unit # exactly. Otherwise, "DENIED" is

displayed or returns to standby mode.

• If both unit # 111 and 1111 exist, the resident name for

unit 111 will be displayed when 1, 1, 1 is entered, and the resident name for unit 1111 will be displayed if 1 is entered one more time.

• Stations can be set to be displayed in order by unit #.

(The order starts with the lowest digit from 0 to 9 and then the order goes by letter.) In cases where unit # such as A101, A201, A901, A1001, and B101 exist, the order starts with the lowest digit and goes in the order A101, A201, A901, B101, A1001.

4 When the target unit # is displayed, press .

The target unit is called.

* Refer to "When the target unit is successfully called"

at the end of

for details.

2-1

- 15 -

ENTRANCE STATION

2-2

Door release

■ Door release by using the access code

* The access code is preset by the system installer or

administrator.

1 In standby mode, enter [#] and then the access

code (4 to 6 digits) using [0] to [9] on the 10-key.

[Modular type]

(e.g.) When the access code is "4567", enter "#", "4", "5", "6", "7".

The door is released.

[All-in-one-type]

■ Door release by an NFC-compliant IC card, etc.

A card incorporated with an NFC tag can be used to release a door. To use, the ID of the NFC tag must be registered as a door release code.

1 Pass an NFC-compliant IC card over the NFC

reader.

[Modular type]

NFC reader

* Put the card within 10 mm of the NFC reader. Otherwise, the

code may not be read correctly.

[All-in-one-type]

• The door release indicator lights up.

• Audio guidance will be heard depending

on the settings.

* If there is no relevant number, "DENIED" is displayed. * Door release is enabled even while the IN USE LED is lit.

2-3

* Calling from an entrance station is disabled while the IN USE LED is lit.

Wait until the IN USE LED turns off.

Other

The door is released.

• The door release indicator lights up.

• Audio guidance will be heard depending

on the settings.

* Door release is enabled even while the IN USE LED is lit.

NOTE: Do not overlap IC cards when passing them over the

NFC reader. The code may not be read correctly.

NOTE: For a multi building system with lift control, if you unlock from a

room and terminate call at the same time, the entrance station may not unlock properly.

- 16 -

GUARD STATION

PART NAMES AND FUNCTIONS

1-1

Operation panel

Multi-function buttons

• LIGHT

• VIDEO CALL

• LIST

• SETTING

10-key (0 to 9, , #)

Handset

Color LCD monitor (Display)

Speaker

ZOOM

WIDE

ADJUST

Status LED (orange)

Indicates the current status of this station by lighting up or ﬂ ashing on/off in orange (while initializing the system, being called, communicating, etc.).

NFC reader

Reset button

Option button

MONITOR button

TALK button

ADJUST button

ZOOM/WIDE button

(up)

(right)(left)

(down)

Door release (

Microphone

OFF button

) button

- 17 -

GUARD STATION

1-2

Indicators

Indication patterns

Status

Indicator

Standby Off

Standby (Call tone volume: off)

Standby (Reception mode: on)

This station is in use by another station (this station is inoperable)

Being called by an entrance station Fast flashing

Being called by a door station Normal flashing

Being called by a door bell Fast flashing

Monitoring an entrance station

6 Status LED (orange)

Long interval flashing

Slow flashing

Off

Lit

(0.5 sec.)

(1 sec.)

(0.5 sec.)

ZOOM

ADJUST

WIDE

(5.5 sec.)

(2.5 sec.)

(0.5 sec.)

(1 sec.)

Communicating with an entrance station

Calling another guard station or residential/tenant station (including in reception mode)

Lit

Fast flashing

(0.5 sec.)

Sounding an emergency alarm Fast flashing

(0.5 sec.)

A new list of missed calls from residential/tenant stations has arrived

Slow flashing

Error indication Off

(An error message is displayed.)

Communication is on hold Off

- 18 -

(0.5 sec.)

(2.5 sec.)

+ 40 hidden pages