Aiphone Fiber Interface Instruction Manual

Fiber Optic Interface with Aiphone Intercoms

LEF System Layout Example:

LE-DA Fiber Module

Copper Cable

Remote door station location connected via fiber optics to master intercom.

Note: This is an example of one system layout. Actual equipment, adaptors, and wiring required will vary by system requirements.

Fiber Optic Cable

Fiber Module

LE-D

Copper Cable

LEF-10

PS-12C

FEATURES:

• Communication from a master to remote locations that are too far away or not cost-effective to install with conventional copper wire

• Audio communication to complement video surveillance for security applications

• Low signal distortion

• Clear signal processing without the possibility of AC noise interference

• All features of intercom system remain intact (except for master-to-master communication over fiber

optic link)

• Any combination of fiber and standard wired sub or door stations may be used Several companies offer interface modules to connect Aiphone master to sub systems via fiber optic

cable. Please contact individual manufacturer for current product information and for specific information regarding the connection and installation of these adaptors. Aiphone does not warrant or technically support the actual fiber interface portion of the system.

Company Name

American Fibertek Somerset, NJ 732/302-0660 www.americanfibertek.com

International Fiber Systems Newtown, CT 203/4261180 www.ifs.com

Fiber Options Bohemia, NY 516/567-8320 www.fiberoptions.com

Aiphone Communication Systems • 1700 130th Ave. NE • Bellevue, WA 98005

(425) 455-0510 • FAX: (425) 455-0071 • (800) 692-0200 • www.aiphone.com

LEF

89A-L

VIC5211

353A Series

+ Fiber modules

LEM

89A-L

VIC5211

353A Series

+ Fiber modules

NEM

89A-N

VIC5211

353A Series

+ Fiber modules

0102