AIOPC TECHNOLOGY AIOT 01 Users Manual

PRODUCT MANUAL

23.6 inches touch all in one PC
AIOT-01

a highly integrated touch-screen personal computer

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better
use of your computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss
of data and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.

Before working inside your
computer

CAUTION: To avoid damaging the components and cards, handle
them by their edges and avoid touching pins and contacts.

NOTE: The images in this document may differ from your computer
depending on the configuration you ordered.

Before you begin

1 Save and close all open files and exit all open applications.
2 Shut down your computer.

– Windows 10: Click or tap Start → Power → Shut down.

– Windows 8.1: On the Start screen, click or tap the power icon →

Shut down.

– Windows 7: Click or tap Start → Shut down.

NOTE: If you are using a different operating system, see the
documentation of your operating system for shut-down
instructions.

3 Disconnect your computer and all attached devices from their electrical

outlets.

4 Disconnect all cables such as telephone cables, network cables and so

on, from your computer.

5 Disconnect all attached devices and peripherals, such as keyboard,

mouse, monitor, and so on, from your computer.

6 Remove any media card and optical disc from your computer, if

applicable.

7 After the computer is unplugged, press and hold the power button for 5

seconds to ground the system board.

CAUTION: Place the computer on a flat, soft and clean surface to
avoid scratching the display.

8 Place the computer face down.

Safety instructions

Use the following safety guidelines to protect your computer from potential
damage and ensure your personal safety.

WARNING: Before working inside your computer, read the safety
information that shipped with your computer.

WARNING: Disconnect all power sources before opening the
computer cover or panels. After you finish working inside the
computer, replace all covers, panels, and screws before connecting to
the power source.

CAUTION: To avoid damaging the computer, ensure that the work
surface is flat and clean.

CAUTION: To avoid damaging the components and cards, handle
them by their edges and avoid touching pins and contacts.

CAUTION: You should only perform troubleshooting and repairs as
authorized or directed by our technical assistance team. Damage
due to servicing that is not authorized by our is not covered by your
warranty.

CAUTION: Before touching anything inside your computer, ground
yourself by touching an unpainted metal surface, such as the metal at
the back of the computer. While you work, periodically touch an
unpainted metal surface to dissipate static electricity, which could
harm internal components.

CAUTION: When you disconnect a cable, pull on its connector or on
its pull tab, not on the cable itself. Some cables have connectors with
locking tabs or thumb-screws that you must disengage before
disconnecting the cable. When disconnecting cables, keep them
evenly aligned to avoid bending any connector pins. When connecting
cables, ensure that the ports and connectors are correctly oriented
and aligned.

CAUTION: Press and eject any installed card from the media-card
reader.