Page 1
GEN3G-100 GEN3G-200
Operation Guide
Ver. 0.5 / May 2016
Page 2
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Warning Precaution
This symbol indicates that dangerous voltage
consisting a risk of electric shock is present within
this unit.
CAUTION
This exclamation point symbol is intended to alert the
user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
Warning
To prevent damage which may result in fire or electric shock hazard, do not expose this appliance to rain or moisture.
Be sure to use only the standard adapter that is specified in the specification sheet. Using any other adapter could
1.
cause fire, electrical shock, or damage to the product.
Incorrectly connecting the power supply or replacing battery may cause explosion, fire, electric shock, or damage to
2.
the product.
Do not connect multiple cameras to a single adapter. Exceeding the capacity may cause excessive heat or fire.
3.
Securely plug the power cord into the power receptacle. Insecure connection may cause fire.
4.
2
Page 3
When installing the camera, fasten it securely and firmly. A falling camera may cause personal injury.
5.
Do not place conductive objects (e.g. screw drivers, coins, metal items, etc.) or containers filled with water on top
6.
of the camera. Doing so may cause personal injury due to fire, electric shock, or falling objects.
Do not install the unit in humid, dusty, or sooty locations. Doing so may cause fire or electric shock.
7.
If any unusual smells or smoke come from the unit, stop using the product. Immediately disconnect the power source
8.
and contact the service center. Continued use in such a condition may cause fire or electric shock.
If this product fails to operate normally, contact the nearest service center. Never disassemble or modify this product
9.
in any way.
10.
When cleaning, do not spray water directly onto parts of the product. Doing so may cause fire or electric shock.
Precaution
Please read this Operation Guide before installing and using the camera & retain this copy for your reference.
Always follow the instructions in the operations guide when applying power. Fire and equipment damage can occur
1.
if power is applied incorrectly. For the correct power supply,refer to the specifications page.
.
Do not use camera if fumes, smoke or a strange odor is emitted from the camera, or if it seems not functional
2
correctly. Disconnect the power source immediately and consult with your supplier.
Do not use the camera in extreme environments where high temperatures or high humidity exists. Use the camera
3.
under conditions where temperatures are between 32°F ~ 104°F, and humidity is below 90%.
4.
If installed close to a TV, radio transmitter, magnet, electric motor transformer or audio speakers the magnetic field
generated may interfere with or distort the image.
5.6.Try to avoid fluorescent light reflections, unstable light conditions, direct pointing toward the sun. Use caution when
operating the camera in the vicinity of spotlights or other bright lights and light reflecting objects.
To prevent damage, do not drop the camera or subject it to strong shock or vibration.
3
Page 4
GEN3G-100
FRONT REAR
I/O Connector Cable
Tripod
Mounting
Hole
SDI IN
Power In
Audio In
I/O: Power, OSD,
& RS-485
HDMI
R
U
D
L
485
+ -
OSD Controller
RS-485
12VDC
RS-485 +
RS-485 -
4
Page 5
GEN3G-200
FRONT REAR
Tripod
Mounting
Hole
CS-Mount
Holding
Screw
I/O Connector Cable
SYNC LED
REF. IN
POWER LED
SDI OUT
Power In
Audio In
R
U
L
AUTO IRIS Lens
Connector
I/O: Power, OSD,
RS-485, Audio
HDMI OUT
D
485
+ -
OSD Controller
RS-485
12VDC
RS-485 +
RS-485 -
5
Page 6
FEATURES
2.1 Megapixel CMOS progressive sensor provides superb image quality and excellent
color reproduction.
SMPTE 292M & 424M standard high denition video format including 59.94Hz.
'Self-Adaptive' resolution and frame rate feature allows camera to self-adopt to the
external reference sync signal.
Highly compatible with Tri Level reference.
Versatile, compact and rugged design.
Built in OSD control button & control via SONY VISCA protocol.
Embedded audio via SDI & HDMI.
Wide range of white balance.
High Dynamic Range & Noise Reduction.
Simultaneous SDI and HDMI Output.
6
Page 7
MENU
LENS
WHITE BALANCE
EXPOSURE
BACK LIGHT
DAY/NIGHT
AUDIO MIC
GENLOCK
IMAGE CONTROL
SETTING
RESET
EXIT
DC IRIS
ATW
AUTO
COLOR
OFF
ON
OSD MENU
LENS DC IRIS MANUAL IRIS
WHITE BALANCE AUTO ATW
EXPOSURE AUTO
BACLKIGHT SPOT
DAY/NIGHT COLOR
AUDIO MIC MIC LINE
GENLOCK MODE
IMAGE CONTROL CONTRAST
SETTING SOFTWARE VERSION
RESET ON
EXIT
ACE
OUTPUT EN
H-SYNC PHASE
PHASE SET
SATURATION
MIRROR
FLIP
D-ZOOM
NOISE REDUCTION
GAMMA
FRAME RATE
CAM ID
BAUDRATE
LANGUAGE
DEFECT DET
PUSH
SHUTTER PRI. FLICKERLESS
HDR BLC
NIGHT
OFF
CHANGE
MANUAL
OFF
MANUAL
7
Page 8
MENU OPERATION
MENU
LENS
WHITE BALANCE
EXPOSURE
BACK LIGHT
DAY/NIGHT
AUDIO MIC
GENLOCK
IMAGE CONTROL
SETTING
RESET
EXIT
UP
LEFT
8
U
L
1
Move the Cursor Up/Down to Choose Menu
DC IRIS
ATW
AUTO
COLOR
OFF
ON
To move from item to item in the menu, move the joystick
to the Up/Down.
2
Change the Value
To change the value of the selected item, move the joystick
to the Left/Right.
3
Shift to the Sub Menu of the Chosen Menu
To go into sub menu, press SEL key.
The menu items with always have its sub menu.
RIGHT
485
SEL
DOWN
+ -
R
D
Page 9
LENS
MENU
LENS
WHITE BALANCE
EXPOSURE
BACK LIGHT
DAY/NIGHT
AUDIO MIC
GENLOCK
IMAGE CONTROL
SETTING
RESET
EXIT
DC IRIS
ATW
AUTO
COLOR
OFF
ON
LENS
DC IRIS
Select "DC IRIS" when using the DC Iris lens (CS/C Mount).
Iris will be controlled by the camera.
MANUAL IRIS
Select "MANUAL IRIS" when using the manual iris lens (CS/C Mount).
Iris needs to be manually set from the lens.
9
Page 10
WHITE BALANCE
10
MENU
LENS
WHITE BALANCE
EXPOSURE
BACK LIGHT
DAY/NIGHT
AUDIO MIC
GENLOCK
IMAGE CONTROL
SETTING
RESET
EXIT
WHITE BALANCE
COLOR TEMP
RED GAIN
BLUE GAIN
RETURN
DC IRIS
ATW
AUTO
COLOR
OFF
ON
5000K
32
32
WHITE BALANCE
Camera provides a wide range of white balance options.
Check your color temperature before adjusting this mode.
AUTO
Camera will automatically adjust the white balance if the color temperature falls within 3,000°K ~ 8,000°K.
ATW
Wider range of color temperature than "AUTO" mode. Camera will autoatically adjust the white balance if the color temperature falls within
1,900°K ~ 11,000°K.
PUSH
Push mode is used if "AUTO" or "ATW" cannot produce the proper white
balance. Place a white paper in front of the camera when using the
"PUSH" mode to self-adopt.
MANUAL
Manual mode has "COLOR TEMP", "RED GAIN", and "BLUE GAIN" options
for user preferred settings.
Adjust white balance using "AUTO" and "ATW" modes before using "PUSH"
or "MANUAL" modes.
White balance may not work properly if the camera is facing toward a light
source.
Page 11
EXPOSURE-AUTO
MENU
LENS
WHITE BALANCE
EXPOSURE
BACK LIGHT
DAY/NIGHT
AUDIO MIC
GENLOCK
IMAGE CONTROL
SETTING
RESET
EXIT
EXPOSURE
EXP. COMPENSATION
GAIN
AGC LIMIT
SHUTTER
SENS-UP
RETURN
DC IRIS
ATW
AUTO
COLOR
OFF
ON
10
AUTO
13
AUTO
OFF
EXPOSURE
Camera exposure level can be adjusted using four dierent modes.
AUTO
Auto mode will adjust the exposure level automatically.
Detailed ne tuning options are available under this menu.
EXP. COMPENSATION : 0~20
Exposure level can be adjusted by the light meter.
GAIN : AUTO, -3dB ~ +30dB
Electronic brightness can be adjusted by "GAIN" control.
AGC LIMIT : 0~20
"AGC LIMIT" sets the maximum gain value to control the video
noise caused by Auto Gain Control.
SHUTTER : OUTDOOR, INDOOR, DEBLUR
Shutter speed is automatically controlled by the camera.
Select "OUTDOOR" when camera is used in outdoor environment.
Select "INDOOR" when camera is used in indoor environment.
Select "DEBLUR" when camera is used in indoor environment.
Shutter value is increased and Iris is opened more than "INDOOR" mode.
AGC LIMIT : OFF, x2, x4, x8, x16, x32, x64
"SENS-UP" mode controls the digital slow shutter to allow extra
light into the camera and adjust the picture quality.
11
Page 12
EXPOSURE-SHUTTER PRI
12
MENU
LENS
WHITE BALANCE
EXPOSURE
BACK LIGHT
DAY/NIGHT
AUDIO MIC
GENLOCK
IMAGE CONTROL
SETTING
RESET
EXIT
EXPOSURE
EXP. COMPENSATION
GAIN
AGC LIMIT
SHUTTER
RETURN
DC IRIS
ATW
SHUTTER PRI
COLOR
OFF
ON
10
AUTO
13
1/90
EXPOSURE
SHUTTER PRI.
Shutter priority mode provides more detailed shutter speed option.
All other controls are tuned for the selected shutter speed.
EXP. COMPENSATION : 0~20
Exposure level can be adjusted by the light meter.
GAIN : AUTO, -3dB ~ +30dB
Electronic brightness can be adjusted by "GAIN" control.
AGC LIMIT : 0~20
"AGC LIMIT" sets the maximum gain value to control the video
noise caused by Auto Gain Control.
SHUTTER : 1/2 ~ 1/40,000
Shutter speed can be set from this menu.
Page 13
EXPOSURE - FLICKERLESS
MENU
LENS
WHITE BALANCE
EXPOSURE
BACK LIGHT
DAY/NIGHT
AUDIO MIC
GENLOCK
IMAGE CONTROL
SETTING
RESET
EXIT
EXPOSURE
EXP. COMPENSATION
GAIN
AGC LIMIT
SHUTTER
RETURN
DC IRIS
ATW
FLICKERLESS
COLOR
OFF
ON
10
AUTO
13
AUTO
EXPOSURE
FLICKERLESS
Flickerless mode provides a proper image sensor frequency to match
the power frequency in order to minimize video icker.
EXP. COMPENSATION : 0~20
Exposure level can be adjusted by the light meter.
GAIN : AUTO, -3dB ~ +30dB
Electronic brightness can be adjusted by "GAIN" control.
AGC LIMIT : 0~20
"AGC LIMIT" sets the maximum gain value to control the video
noise caused by Auto Gain Control.
SHUTTER : AUTO
Shutter speed is automatically controlled by the camera.
"FLICKERLESS" mode may not be suitable if camera is used in extreme
bright environment.
13
Page 14
EXPOSURE-MANUAL
14
MENU
LENS
WHITE BALANCE
EXPOSURE
BACK LIGHT
DAY/NIGHT
AUDIO MIC
GENLOCK
IMAGE CONTROL
SETTING
RESET
EXIT
EXPOSURE
GAIN
SHUTTER
RETURN
DC IRIS
ATW
MANUAL
COLOR
OFF
ON
2
1/90
EXPOSURE
MANUAL
Manual mode will only allow "GAIN" and "SHUTTER" speed adjustments.
GAIN : AUTO, -3dB ~ +30dB
Electronic brightness can be adjusted by "GAIN" control.
SHUTTER : 1/2 ~ 1/40,000
Shutter speed can be set from this menu.
Page 15
BACKLIGHT
MENU
LENS
WHITE BALANCE
EXPOSURE
BACK LIGHT
DAY/NIGHT
AUDIO MIC
GENLOCK
IMAGE CONTROL
SETTING
RESET
EXIT
BACK LIGHT
BACK LIGHT
ACE
RETURN
DC IRIS
ATW
FLICKERLESS
COLOR
OFF
ON
SPOT
OFF
BACK LIGHT
Camera provides multiple options for BACKLIGHT requirements.
SPOT
"SPOT" is spot metering feature. It will evaluate the light around the
focus point. Focus point can be adjusted by the following menu.
AE HOR POS
AE VER POS
AE WIDTH
AE HEIGHT
HDR : LOW, MIDDLE, HIGH
"HDR" reproduces a greater dynamic range for clear view of both
bright and dark areas.
BLC : LOW, MIDDLE, HIGH
"BLC" mode will express darker area brighter.
Enabling "BLC" may cause overexposure in bright area.
ACE : LOW, MIDDLE, HIGH
"ACE" feature is digital HDR mode.
It utilizes "GAMMA" and "CONTRAST" to adjust both bright and dark
image areas.
15
Page 16
DAY / NIGHT
16
MENU
LENS
WHITE BALANCE
EXPOSURE
BACK LIGHT
DAY/NIGHT
AUDIO MIC
GENLOCK
IMAGE CONTROL
SETTING
RESET
EXIT
DC IRIS
ATW
MANUAL
COLOR
OFF
ON
DAY/NIGHT
COLOR
Select "COLOR" mode to stay in color at all time.
NIGHT
Select "NIGHT" mode to stay in black and white mode.
"COLOR" mode will not detect infrared light whereas "NIGHT" will detect
infrared light for better visibility during extreme low light conditions.
Page 17
AUDIO MIC
MENU
LENS
WHITE BALANCE
EXPOSURE
BACK LIGHT
DAY/NIGHT
AUDIO MIC
GENLOCK
IMAGE CONTROL
SETTING
RESET
EXIT
AUDIO MIC
AUDIO LEVEL
MIC ATTENUATION
SAMPLE RATE
RETURN
DC IRIS
ATW
FLICKERLESS
COLOR
MIC
ON
+20 dB
OFF
24 RATE
AUDIO
Camera supports external analog audio input (3.5mm).
Audio will be embedded to both SDI and HDMI outputs.
MIC
Camera will receive MIC level audio input by selecting "MIC" mode.
AUDIO LEVEL
Audio level can be manually adjusted from this menu.
MIC ATTENUATION
Audio input attenuation can be controlled from this menu to
minimize the audio noise level.
SAMPLE RATE
Audio sample bit rate can be adjusted from this menu.
LINE
Camera will receive Line level audio input by selecting "LINE" mode.
AUDIO LEVEL
Audio level can be manually adjusted from this menu.
MIC ATTENUATION
Audio input attenuation can be controlled from this menu to
minimize the audio noise level.
SAMPLE RATE
Audio sample bit rate can be adjusted from this menu.
: -12dB ~ +59dB
: ON, OFF
: 16, 20, 24, 32
: -12dB ~ +59dB
: ON, OFF
: 16, 20, 24, 32
17
Page 18
GENLOCK
18
MENU
LENS
WHITE BALANCE
EXPOSURE
BACK LIGHT
DAY/NIGHT
AUDIO MIC
GENLOCK
IMAGE CONTROL
SETTING
RESET
EXIT
GENLOCK
MODE
OUTPUT EN
H-SYNC PHASE
PHASE SET
RETURN
DC IRIS
ATW
MANUAL
COLOR
OFF
ON
ON
ON
0
ON
GENLOCK
Camera is equipped with an external Tri-Level reference signal input for
seamless switching. Up to 3G-SDI reference signal can be accepted and
camera will self-adjust to both resolution and frame rate based on the
reference signal.
MODE
Enable or Disable the external reference signal.
OUTPUT EN
Enable or Disable the reference signal loop out.
H-SYNC PHASE
Adjust H-Sync pixel oset for a ne tuning.
PHASE SET
Enable "PHASE SET" to apply the changes made from "H-SYNC PHASE".
(For GEN3G-200 model only)
Page 19
IMAGE CONTROL
MENU
LENS
WHITE BALANCE
EXPOSURE
BACK LIGHT
DAY/NIGHT
AUDIO MIC
GENLOCK
IMAGE CONTROL
SETTING
RESET
EXIT
IMAGE CONTROL
CONTRAST
SATURATION
SHARPNESS
MIRROR
FLIP
D.ZOOM
NOISE REDUCTION
GAMMA
FRAME RATE
RETURN
DC IRIS
ATW
FLICKERLESS
COLOR
MIC
ON
32
15
10
OFF
OFF
1.0X
LOW
STANDARD
HD1080P60
IMAGE CONTROL
Camera provides multiple options to adjust image quality.
CONTRAST : 0~64
"CONTRAST" controls the range between dark and bright areas.
SATURATION : 0~20
"SATURATION" sets the level of color vividness.
SHARPNESS : 0~20
Image outline or edges will be clearer and pronounced.
MIRROR : ON, OFF
Image is rotated horizontally.
FLIP : ON, OFF
Image is rotated vertically.
D.ZOOM : 1.0X ~ 16.0X
Digitally zoom in to an area up to 16 times.
NOISE REDUCTION : OFF, LOW, MIDDLE, HIGH
Reduce noise level at low ambient light.
GAMMA : LOW, MIDDLE, HIGH, STANDARD, STRAIGHT
Gamma curve can be adjusted from this menu.
FRAME RATE
Camera provides 14 dierent resolution and frame rate settings.
1080p25 / 29.97 / 30 / 50 / 59.94 / 60
1080i50 / 59.94 / 60
720p25 / 30 / 50 / 59.94 / 60
19
Page 20
SETTING
20
MENU
LENS
WHITE BALANCE
EXPOSURE
BACK LIGHT
DAY/NIGHT
AUDIO MIC
GENLOCK
IMAGE CONTROL
SETTING
RESET
EXIT
SETTING
SOFTWARE VERSION
CAM ID
BAUDRATE
LANGUAGE
DETECT DET
RETURN
DC IRIS
ATW
MANUAL
COLOR
OFF
ON
G.0.6.0
1
9600
ENG
ON
SETTING
Camera software and remote control information is under this menu.
You can remotely access the features via RS485.
SOFTWARE VERSION
Camera software version information.
CAM ID : 0~255
Set camera ID for remote camera control access.
Camera supports SONY VISCA and PELCO protocols.
BAUDRATE : 2,400 ~ 115,200
Set baud rate for remote camera control access.
LANGUAGE
Camera menu language can be set to either English or Chinese.
DETECT DET
Camera provides an auto pixel correction.
Please consult with your authorized dealer or factory before using
"DEFECT DET".
Page 21
RESET
MENU
LENS
WHITE BALANCE
EXPOSURE
BACK LIGHT
DAY/NIGHT
AUDIO MIC
GENLOCK
IMAGE CONTROL
SETTING
RESET
EXIT
RESET
RESET MODE
SAVE
RETURN
DC IRIS
ATW
FLICKERLESS
COLOR
MIC
CHNAGE
FACTORY
_ _ _ _
RESET
Camera setting can be defaulted to the "FACTORY" setting.
User can also save the desired setting as the "USER" setting.
CHANGE
Before defaulting the camera setting, make sure to select the desired
setting.
FACTORY
Select "FACTORY" if factory default setting is needed.
"FRAME RATE", "CAM ID", "BAUDRATE" will not change.
USER
Select "USER" if user saved setting is needed.
SAVE
To save a user desired setting, Select "USER" from above menu and
"SAVE".
ON
Press the menu button from your controller to set the camera to either
"FACTORY" or "USER".
Make sure to select the right mode from "CHANGE" before defaulting
the camera.
21
Page 22
SPECIFICATION: GEN3G-100
Image Sensor
Sensor Size
Effective Pixels
Pixel Size
Sync System
Resolution
Minimum Illumination
Frame Rate
SMPTE Standard
Video Signal Output
White Balance
Lens Mount
Synchronization
Audio Input
Audio Sample Rate
Color Space
Other Features
Camera Control
Operation Temperature
Dimension & Weight 36 x 36 x 60mm & 86g (Without Lens)
Power Requirements 6W at 12VDC (+9 ~ +15VDC)
True Day and Night, Auto Gain Control, Wide Dynamic Range
1/3 inch Progressive CMOS
5.346mm x 3.003mm (16:9)
Horizontal: 1920, Vertical: 1080
2.75 µm x 2.75 µm
1080p / 1080i: 1920 x 1080 Full HD
720p: 1280 x 720
0.2Lux (Day), 0.05Lux(Night)
1080 60p / 59.94p / 50p / 30p / 29.97p / 25p
1080 60i / 59.94i / 50i
720 60p / 59.94p / 50p / 30p / 25p
SMPTE 292M, SMPTE 424M
Auto & Manual (1,900°K~11,000°K)
C / CS Mount w/ DC Iris
3.5mm Analog Audio Input
16 / 20 / 24 / 32 bits
4:2:2(YCbCr) 10bit
OSD Control Button / via RS-485
Specications are subject to change without notice
22
Internal Sync.
3G/HD-SDI
HDMI 1.3a
-
15°F ~ 120°F
Page 23
SPECIFICATION: GEN3G-200
Image Sensor
Sensor Size
Effective Pixels
Pixel Size
Sync System
Resolution
Minimum Illumination
Frame Rate
SMPTE Standard
Video Signal Output
White Balance
Lens Mount
Synchronization
Audio Input
Audio Sample Rate
Color Space
Other Features
Camera Control
Operation Temperature
Dimension & Weight 49 x 49 x 57mm & 150g (Without Lens)
Power Requirements
True Day and Night, Auto Gain Control, Wide Dynamic Range
1/3 inch Progressive CMOS
5.346mm x 3.003mm (16:9)
Horizontal: 1920, Vertical: 1080
2.75 µm x 2.75 µm
Internal Sync.
1080p / 1080i: 1920 x 1080 Full HD
720p: 1280 x 720
0.2Lux (Day), 0.05Lux(Night)
1080 60p / 59.94p / 50p / 30p / 29.97p / 25p
1080 60i / 59.94i / 50i
720 60p / 59.94p / 50p / 30p / 25p
SMPTE 292M, SMPTE 424M
3G/HD-SDI
Auto & Manual (1,900°K~11,000°K)
HDMI 1.3a
C / CS Mount w/ DC Iris
External Tri-Level Sync Input
3.5mm Analog Audio Input
16 / 20 / 24 / 32 bits
4:2:2(YCbCr) 10bit
OSD Control Button / via RS-485
15°F ~ 120°F
6W at 12VDC (+9 ~ +15VDC)
Specications are subject to change without notice
23
Page 24
Disposal of Old Appliances
1. When this crossed-out wheel bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately form the municipal waste stream stream in accordance to laws designated by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city oce, waste disposal service or the shop where you purchased the product.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful inte
rference in which case the user will be required to correct the interferenece at his own expense.
Loading...