Aicok VK-IH3000E User Manual

INSTRUCTION MANUAL

INDUCTION COOKER

VK-IH3000E

THANK YOU

1. Black crystal board

2. Cover housing

3. Copper coil

4. PCB board

5. Supply cord and plug

6. Base housing

7. Control panel

8. Fan

Our products are designed to meet the highest standards of quality, functionality and design.
Thank you for choosing us, we hope you enjoy your new AICOK induction cooker.

DESCRIPTION OF PARTS

CONTROL ZONE

IMPORTANT SAFEGUARDS

- Read all the instructions before using the appliance. Keep these instructions for future

- Do not use the appliance with wet hands, on a wet floor or in a damp environment.

- Do not use the appliance with an extension cord. Do not connect the device to the same

- Do not place or operate the appliance and its power cord on or near hot surfaces (e.g. stove

- Never leave the appliance unsupervised when in use.

- Keep out of reach of children or incapable persons. This appliance is not intended for use by

- From time to time check the appliance, cord and plug for damages. Never use the appliance

- All repairs should be made by a competent qualified electrician. Competent qualified

- Only use the appliance for domestic purposes and in the way indicated in these instructions.

- Stand the appliance on a stable surface. Do not operate the appliance on a metal table.

- Do not heat with an empty pot/pan. Never overheat the pot/pan.

- Do not place any paper between the pot/pan and the unit.

- Never move the unit pulling it by the power cord. When removing the plug from the wall

- Do not move the appliance during cooking or with hot cookware on top of it.

- Never immerse the appliance in water or any other liquid for any reason whatsoever. Never

- The appliance is not intended to be operated by means of an external timer or a separate

- Place the device on a stable and level surface.

- Never place the device on a flammable surface (e.g. table cloth, carpet, etc.).

- Do not block the ventilation slots of the device. This may overheat the device. Keep a Min.

- Do not place the induction hotplate next to devices or objects that react sensitively to

- Do not place induction hotplates next to open fires, heaters or other sources of heat.

- Make sure that the mains connection cable is not damaged or squashed beneath the device.

- Make sure that the mains connection cable does not come into contact with sharp edges

- Prior to connecting the device, check whether the voltage indicated on the type plate

- The hotplate's surface consists of temperature-resistant ceramics. In case of damage, even

- We recommend not placing any metal kitchen utensils, cookware or pan lids, knives or other

- Do not place any magnetic objects such as credit cards, cassettes etc. on the glass surface

- On order to avoid overheating, do not place any aluminium foil or metal plates on the device.

- Do not insert any objects like wires or tools into the ventilation slots. Attention: this may

reference.

outlet with other devices.

plates) or open flames.

persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their safety. Children should be
supervised to ensure that they do not play with the appliance.

if the appliance, cord or plug shows any signs of damage.

electrician: after sales department of the manufacturer or importer or any person who is
qualified, approved and competent to perform this kind of repairs in order to avoid all danger.

socket, never pull the power cord itself.

place it into the dishwasher.

remote-control system

INSTALLING THE DEVICE

distance of 5 to 10 cm to walls or other items.

magnetic fields (e.g. radios, TVs, cassette recorders, etc.).

and/or hot surfaces.

COMMISSIONING THE DEVICE

corresponds to the voltage supply in your home. A wrong connection may lead to serious
damage of the device and injury to the user.

if this concern only a small tear, disconnect the device from the power supply immediately
and contact the customer service.

metal objects on the hotplate. These may heat up when the device is turned on.

while the device is in operation.

cause electric shocks.