Aicok SWF17S05A User Manual
COOL TOUCH KETTLE
INSTRUCTIONS
MODEL NO. SWF17S05A
220-240V 50Hz 1800-2150W
Congratulations on purchasing our ACIOK COOL TOUCH KETTLE. Each unit is manufactured to
ensure safety and reliability. Before using this appliance for the first time, please read the
instruction manual carefully and keep it for future reference.
PARTS DESCRIPTION
1. Lid open button
2. Spout
3. Kettle body
4. Power base
5. Upper lid
6. Handle
7. Illuminating Switch
8. Power cord with plug
3
IMPORTANT SAFEGUARDS
When using any electrical appliance, basic safety precautions should always be followed. Please
read and observe the following:
1. This appliance can be used by children aged from 8 years and above if they have been
given supervision or instruction concerning use of the appliance in a safe way and if they
understand the hazards involved. Cleaning and user maintenance shall not be made by
children unless they are older than 8 and supervised. Keep the appliance and its cord
out of reach of children aged less than 8 years.
2. Appliances can be used by persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved.
3. Children shall not play with the appliance.
4. This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
5. The heating element surface is subject to residual heat after use
6. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.”
7. Please read the instructions carefully before using this appliance.
8. Verify the power voltage conforms to the kettle voltage marks on the label.
9. Use the kettle on flat stable surface, away from any heat source (flame, cooktop, and
microwave).
10. Do not place the kettle on a wet area or in water – do not operate it with wet hands.
11. Only use this kettle to heat water. Use indoors only. Not for outdoor environments.
12. Do not fill the kettle above the MAX water level (1.7L/6 cups), otherwise boiling water
may overflow.
13. Do not turn ON unless the kettle contains at least 0.5L / 2 cups of water.
14. Only fill the kettle with cold water. Do not fill the kettle above the MAX level (1.7L) or
else boiling water may splash out if overfilled.
4
15. Do not open the lid while the kettle is in use. Escaping hot vapour will cause scalding.
16. Check that the lid is securely close before you turn the kettle on, otherwise it may not
trigger the auto shut-off and allow the kettle to boil dry. (This will start the auto “dry-
boil, shut-off” function).
17. Check to make sure the kettle is secured to the based before it is turned on. Only use
the based provided.
18. Do not leave this appliance unattended during use. And don’t allow unsupervised
children near the kettle while in use.
19. A short cord is provided to reduce the accidents. Ensure that the cord is safety placed
where it cannot accidentally get hooked and drag the kettle over.
20. Watch the cord not to touch hot surfaces and is away from stove and burners.
21. Keep the device and cable away from heat, direct sunlight, moisture, sharp edges and
anything that can cause damage.
22. To reduce the risk of electric shock, do not expose the motor assembly or insert
anything into any holes or slots.
23. Unplug the unit when not in use. Confirm it is disconnected before you clean it.
24. Never immerse the unit in water or an automatic washer for cleaning purposes.
* Do not allow liquid to penetrate into the electrical parts of this kettle and cord.
25. Remove the plug from the socket by holding and pulling the connector. Never pull on
the cord
26. DO NOT carry the appliance by the power cord.
27. Use of an extension cord with this appliance is not recommended. However, if it is
necessary, safely place the extension cord white it cannot be tripped over. Secure and
hide the extension cord from children and animals. Make sure it away from heat.
28. Ensure that the switch is in the “OFF” position after each use.
29. This appliance must not be operated by an external timer or remote control system.
30. The manufacturer does not accept responsibility for any damage or injury caused by
incorrect use or repair carried out by unauthorised personnel.
31. In case of technical problems, turn off the machine and do not attempt to repair it
yourself.
5
OPERATING INSTRUCTIONS
Carefully remove your kettle from the box. You may wish to retain the packaging for further use.
CLEANING BEFORE USING
Before first use, fill the kettle with cold water to the MAX water level mark, bring to boil
and discard the boiling water – do this twice.
This will ensure that any residues left over from the manufacturing process are
completely removed.
POSITIONING THE KETTLE
Find a flat sturdy surface near a wall outlet, safe from any direct heating source.
The underside of the power base is fitted with a cable storage feature. This is where you
wind and unwind the cord before and after use.
Unwind the length of the mains cable required to reach the mains socket.
Ensure the mains cable does not hang over the work surface edge.
FILLING THE KETTLE
Remove the kettle from the power base.
Open the lid by pressing the lid release button.
Fill the kettle between the MIN and MAX markings on the water level indicator with cold
water.
Close the lid and place the kettle back on the power base. Make sure the lid is securely
closed before boiling.
*Always remove the kettle from the power base before filling to ensure water does
not get into the electrical circuitry of the base. Do not fill the kettle above the MAX
mark.
OPERATING YOUR KETTLE
Connect the power cord into a 220-240V power outlet.
Turn your kettle ON. The LED will light, indicating that the heating and boiling process
has begun.
6
The kettle’s “auto shut-off” function will launch after the water has boiled. You can stop
the boiling process at any time by lifting the on/off switch to the “0” (off) position or
lifting the kettle off the base.
Unplug the kettle.
Remove the kettle from the power base.
Carefully pour the water.
Return the kettle to the base.
DOUBLE DRY HEATING PROTECTION
If you have forgotten to add water or the water inside is below the minimum accepted
level, the metal sheet for dry heating protection of the temperature controller will
disconnect automatically when the kettle is switched on in order to protect the kettle
from being damaged by dry heating.
If the above situation happens, please turn off the power supply, unplug the kettle and
wait 10 minutes for it to cool down. Once this is done, the temperature controller
connects and the kettle will operate normally again.
Note: Do not add cold water in the kettle in an attempt to cool it down quicker – this will
decrease the life span of the kettle’s heating plate.
GENERAL
*Beware of hot steam Escaping from the lid
The kettle has seamless 304 stainless steel interior for quick boiling and col touch exterior which
makes the kettle safe to touch.
Always remove the kettle from the base before pouring.
To avoid the risk of splashing, pour slowly and do not over-tilt the kettle.
Do not tilt the kettle backwards - water might get on to the control area. If this happens,
let the kettle dry thoroughly before use – place it somewhere warm for 12 hours.
When you lift the kettle, you may see moisture on the base. Do not worry – it’s the
steam used to switch the kettle off automatically, which then condenses and escapes via
vents under the kettle.
Loading...