LD-291 Egg Cooker
Instruction Manual
1. Product Map
(1)Up cover (2)Egg sehlf
(3)Heating element (4)body sheath
(5)Switch (6)Body
(7)Measuring Cup (8)Pin
(9)Power cord
2. Characteristic of Product
(1) Electric parameter:
Voltage: 220-240V;
Frequency: 50 HZ
Wattage: 400W
(2) Egg capacity:( SEVEN )
a. Shortcut : Steaming egg will spent about six minutes one time.
b. Energy-economization : Wattage is 400W , Steaming seven eggs will cost two cents only.
c. Convenience:The egg cooker with the automatically switch, it can turn off automatically after cooked,
and the indicator of lamp will crush out for remind you.
d. Safety and credibility: With two dual super-temperature equipment against damage, Safety and
credibility.
e. Beautiful appearance:proper figure design and brightness stainless steel heater make your life more
sentiment.
f. Multi-function:With two function of cooking and steaming egg, You can cooking or warmming egg
according to your requirement.
g. Multi-taste:You can make different taste egg according to your need. Semi-cooked (yolk can’t cohere
but egg white will become a little cohere, smooth and soft), seventieth-cooked (The core of the yolk
become shape like paste, soft), ninetieth-cooked (The core of yolk has been cohered, crisp)
3. Method of Using
(1). When first using the egg cooker, rinse it first (Please reading attention item before rinse),Then put the egg
cooker on the surface of flat, Take proper water pour in the inside of the heater plate in Measuring cup,
The quantity of water which you can choose. More or less of water control the limit of cooked.
(2). Different scale (one, three, five, seven) on the measuring cup, These scale control quantity of water
which limit egg cooked ,For example, Use measuring cup take water to pour into the heater plate on the
mark of three when you want to eat semi-cooked. Please refer to attachment A.
Attachment A:
(3). After pour the water, Put the rack on the heater plate and meet with the position of the heater plate.
(4). Pierce the large end of each egg with the piercing pin
incorporated into the measuring cup then place the small
end of each egg into the hole of rack.
(5). Put the cover on the rack and catch the handle to put the cover on the proper place.
(6). Turn on power, Then press the switch ,The indicator lamp Will lighting demonstrate the egg cooker
began to operation.
(7). Please press the button when you see the indicator lamp crush out, And demonstrate that cut off the
electric power.
(8). Place the egg into the cold water, this methods could easy peel off the shell of egg, The more hot ,The
more delicious .
(9). Use clean damp cloth to rinse the heater plate, so prevent dirty, convenience to use in next time.
4.Attention item:
(1) Please reading manual carefully before using it ,and keep it for reference.
(2). Must use sound quality of grounding’s tri-plug.