Aicok CP-06 User Manual

Aukey E-Business Co., Ltd.

Huanan City, Electronic Trading Building, P09 Room 102, Longgang District, Shenzhen, China

Website:www.Aicok.cc

CP-06

INSTRUCTIONS

INSTRUCTIONSCP-06

Table of Contents

Important Safeguards

First Use

Cooking

Cleaning

Recipes

Crepe Serving Hints

Create Your Own Fillings

Warranty

2/3

3

4

4

5/7

8

8

9

Important Safeguards

When using electrical appliances, basic safety precautions should always be followed,
ncluding:

1.

Read all instructions.
Do not touch hot surfaces, instead use the handles.

2.

To protect against electrical shock, do not immerse power cord, plug or appliance in

3.
water or any other liquid.

If the power cord is damaged, the manufacturer (or a similarly qualified person) must

4.
replace it in order to avoid a hazard.

5.

Do not use outdoors

Close supervision is necessary when any appliance is being used by or near children.

6.

Avoid contact with moving parts

7.

The use of accessory attachments not recommended by the appliance manufacturer may

8.
cause injuries.
Unplug from outlet when not in use and before cleaning. Allow appliance to cool completely
before putting on or taking off parts. and before cleaning the appliance.

9.

Unplug from outlet when not in use and before cleaning. Allow appliance to cool completely
before putting on or taking off parts.

Do not operate any appliance with a damaged power cord or plug or after the appliance

10.

malfunctions or is dropped or damaged in any manner. Return appliance to manufacturer
of its service agent for examination, repair or electrical or mechanical adjustment.

Do not let the power cord hang over the edge of a table or counter or touch any hot

11.

surface.
Do not use the appliance for other than intended use.

12.

13.

Do not place on or near a hot gas or electric burner, or in a heated oven.

To disconnect, remove the plug from the wall outlet.

14.

15.

Do not clean the appliance with metal scouring pads. Pieces can break off from the pad
a nd touch electrical parts, creating a risk of electrical shock.

0201

INSTRUCTIONSCP-06

Save These Instructions - Household Use Only

A short power-supply cord should be used to reduce the risks resulting from becoming entangled
in or tripping over a longer cord.
Longer extension cords are available and may be used if care is exercised in their use.
If a long extension cord is used:
The marked electrical rating of the extension cord should be at least as great as the electrical rating
of the appliance;
The longer cord should be arranged so that it will not drape over the counter top or table top where
it can be pulled on by children or tripped over.

NOTICE:

This appliance has a polarized plug (one blade is wider than the other), To reduce the risk of
electric shock, this plug is intended to fit into a
polarized outlet only one way, If the plug does not fit fully into the outlet, reverse the plug, If it still
does not fit, contact a qualified electrician, Donot attempt to modify the plug in any way.

HOW TO USE YOUR ELECTRICAL CREPE MAKER

Place the unit on a level surface, never against a wall or in a corner or against curtains.
It should be free-standing and kept away from any flammable material.

The cooking surface can become extremely hot while the appliance is in use. Make sure that
no one touches the hot parts of the unit during use and the cooling down period. Allow the unit
to cool down before cleaning, transporting or storing.

Never cut the crepes on the baking plate! Use only heatproof plastic or wooden utensils so as
not to scratch the non-stick coating on the baking plate.

Cooking

Set up the crepe maker as above and once it reaches cooking temperature (green light
comes on) pour some crepe batter onto the baking plate, spreading it with a circular movement
using the batter spreader. Moisten the batter spreader before use. This prevents the batter
from sticking to it.
When you pour the batter onto the hot baking plate, you might hear some slight crackling
noises caused by differences in temperature and voltage. This does not damage the appliance.
The green light will go on and off repeatedly during use. This indicates when the unit is
heating up in order to maintain the required temperature.
Allow the crepe to cook until the surface is no longer liquid and the crepe can be moved slightly.
Insert a spatula under a third of the crepe, lift the crepe and turn it over.
Leave the crepe to cook briefly until done. Lift it slightly with the spatula to check. The crepe
should be visibly cooked through but not yet brown. Cooked this way, it can be easily folded
or rolled.
Remove the crepe from baking plate.
If you wish to cook another crepe and the last crepe was too dark, move the temperature
selection switch down slightly.
When finished, remove the plug from the wall outlet and let the appliance cool.
Spread or fill the crepe according to taste and fold it or roll it.

First Use

Remove the unit from box and properly dispose of packing materials. Wipe the unit with a damp
cloth and let dry well.
Insert the plug into a wall outlet. Move the temperature selection switch fully to the right to level 5
and switch the crepe maker on using the On/Off switch. The red light lights us and the unit starts
to heat.
Pre-heat the unit for 4 minutes (until the green indicator light comes on) at the highest temperature
(5) and then turn it off and let it cool.
The first time the unit is used, a slight odor may develop. This is entirely harmless. Please make
sure that there is adequate ventilation.

Cleaning

Remove the plug from the wall socket and allow the crepe baker to cool. Take a damp
cloth and clean the surface, and edges.
The batter spreader can be washed, but do not allow it to soak in water.
Once dry, store in a safe place.
Any other servicing should be performed by an authorized service representative.

0403