Aicok CG9100 User Manual
COFFEE GRINDER
INSTRUCTION MANUAL
CG9100
1
INSTRUCTION MANUAL
COFFEE GRINDER
Model: CG9100
Read this manual thoroughly before using and save it for future
reference
2
IMPORTANT SAFEGUARDS
Before using the electrical appliance, the following basic precautions
1. Read all instructions.
2. Before using, check that the voltage of wall outlet corresponds to
3. Do not operate any appliance with a damaged cord or plug or
4. If the supply cord is damaged it must be replaced by the
5. Unplug from outlet when not in use, before putting on or taking
6. Do not let cord hang over edge of table or hot surface.
7. Do not immerse the motorized base in liquid, or place in
8. Close supervision is necessary when your appliance is being
9. Ensure fingers are kept well away from moving parts.
10. Do not remove cover until blade has completely stopped.
11. Do not attempt to operate without the cover being in place.
12. The use of accessory not recommended by the manufacturer
13. Check grinding bowl for presence of foreign objects before using.
14. Do not operate the appliance for other than its intended use.
15. Do not use outdoors.
should always be followed including the following:
the one shown on the rating plate.
after the appliance malfunctions, or is dropped or damaged in
any manner. Return appliance to the nearest authorized service
facility for examination, repair or electrical or mechanical
adjustment.
manufacturer or a authorized service agent or a qualified
technician in order to avoid a hazard.
off parts, and before cleaning.
dishwasher. Damage to the unit will occur if submerged in liquid
or filling the liquid into the container. Only the transparent top
cover may be immersed.
used near children or infirm persons.
may cause injuries to persons.
3
SAVE THESE INSTRUCTIONS
Power switch
Transparent
cover
Grinding bowl
(with blade in it)
Motor base
HOUSEHOLD USE ONLY
NOTES ON THE CORD PLUG
This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully into the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.
KNOW YOUR COFFEE GRINDER
4
BEFORE THE FIRST TIME
Carefully unpack your coffee grinder and remove all packing
USING YOUR COFFEE GRINDER
1. Place the coffee grinder on a flat surface.
2. Assemble the grinding bowl into the motor base, then turn the
3. Pour coffee beans into the grinding bowl, it must be noted the
4. Recover the transparent cover and plug into the power outlet.
5. Press and hold the power switch, the appliance will start operating,
6. View the consistency of coffee grounds from the transparent cover.
7. Once the desired grind has obtained, release power switch and
8. Remove the transparent cover, disassemble the grinding bowl and
materials. To remove any dust that may have accumulated during
packaging, wipe the grinding bowl, blades with a damp lint-free cloth
or sponge. Use extreme care as the blades are sharp. The
transparent cover can be immersed in water for cleaning, dry
thoroughly.
Caution: Never immerse the motor base in water for cleaning and do
not fill the grinding bowl with water for cleaning.
bowl clockwise until a click sound is heard. When disassembling,
turn the bowl anti-clockwise to detach it.
quantity of coffee beans shall not exceed 60g.
once release the power switch, the appliance will stop operating.
NOTE: Do not operate this appliance continuously for more than
30Second, allow appliance to cool down for 3 minute between
two continuous cycles.
IMPORTANT: If you want to remove the cover to check the
consistency of the coffee grounds. It must be noted never remove
the cover until blades come to a complete stop.
unplug the power cord from the outlet.
pour out the coffee ground directly.
Loading...