Aicok BT-C20 User Manual

1). Disconnect plug and wait until the unit is cooled down completely. Clean after every use.
2). If the pots/pans are used without being cleaned, it may cause discoloration or get on stains.
3). Do not use benzine, thinner, scrubbing brush or polishing powder to clean the induction cooker.
4). Please clean the surface with a damp cloth and a detergent.
5). Please use vacuum cleaner to suck up dirt from the air intake and exhaust.
6). Never running water over the unit (If the water gets inside, it may cause malfunction).
Appliances are not intended to be operated by means of an external timer or separate remote-control
system.
This appliance is intended to be used in household and similar applications such as:
– kitchen staff areas in shops, offices and other working environments;
– farm houses;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
Please read carefully the following instructions before using this induction cooker.
01). Do not handle plug or appliance with wet hands.
02). Do not plug into a socket where several other appliances are plugged in.
03). Do not use if the plug cord is damaged or the power plug does not fit the socket safely.
04). Do not modify the parts, or repair the appliance by yourself.
05). Do not use this appliance near flame or wet places.
06). Do not let children touch when using this appliance, or allow children to use this appliance by
themselves.
07). Do not place on unstable surfaces.
09). Do not heat an empty pot or overheat the pot.
10). Do not place metallic objects such as knives, forks, spoons, lids, cans, and aluminum foils on the top
plate.
11). Ensure that there is sufficient space around this appliance for heat dissipation. To prevent overheating
and fire, do not cover it or place objects around them.
12). Do not use this appliance on carpet or tablecloth (vinyl) or on any other low-heat-resistant article.
13). Do not place a sheet of paper between the cookware and the appliance. The paper may get burnt.
14). If the surface is cracked, please switch off and take it to the service center immediately.
15). Do not block the air intake or exhaust.
16). Do not touch the top plate right after removing the pot or the pan, as the top plate will still be very hot.
17). Do not place this appliance close to the objects which are affected by magnet, such as: radios,
televisions, credit cards and magnetic tapes.
18). The power cord must be replaced by qualified technicians.
19). The surface is liable to get hot during use.
20).This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have beengiven supervision
or instruction concerning use of the appliance by a person responsible for their safety.
1).Connect power plug, it makes a “beep” sound. All indicator light will be flash once, which represent the
induction cooker is under “standby mode”. Pressing the ON/OFF key once,three LEDs above SELECT
key start flashing, press SELECT key once. After cooking, press “ON/OFF” button to switch off the
appliance.Unplug the appliance when the fan is stopped.
2) “ SELECT” selection
Pressing the “SELECT” button to select the function:
a. Power Setting: Place the pans in the centre of stove-top. Pressing “ON/OFF” button, the power indicator
lights up. Then pressing “ SELECT” button, the induction cooker start to work, the display shows “5.0”.
Pressing and to adjust the power (Total of 15 power levels for choice).
b. Temperature Setting: Pressing the “ SELECT” button again, Temperature indicator lights up and the
display shows “320°F”, that means the temperature is 320°F. Pressing and to adjust the
temperuature(From 140°F-460°F for choice).
3) Timer Setting: Pressing the “TIMER” button when the appliance is operating, Timer indicator lights up
and the display shows “0”. Pressing and to adjust the timer. Increase 1 min by each press. The
maximum adjustable time is 170 mins.
4) “ LOCK” setting
Pressing the LOCK button, the induction cooker will lock all the function except turn off function.
If you want to Unlock, press the Lock button again and hold your finger until it makes a sound “beep”.
If you want to resart when locked, you have to unlock it first, then every button can work normally.
5). The induction cooker will shut off automatically if there is no any operation within 2 hours when the
appliance is not be set a timer above 120 minutes.
6). The temperature of accessible surfaces may be high when the appliance is operating.
Loading...