Page 1
Single cup Brewer
User Manual
Model: AC-507K
Please read all instruc
ons carefully before opera ng the appliance
and keep for future reference
Page 2
Congratulaons…
The Single -Serve Coffeemaker has been designed and manufactured with
the greatest care. It will provide you with many years of enjoyable delicious coffee.
Before using your new coffeemaker it is important you read this enre manual.
Table of Contents
Important Safeguards -----------------------------------------------------------------------3
Special Cord Set Instrucons ----------------------------
What’s in the Box ----------------------------------------------------------------------------6
Before the First Use--------------------------------------------------------------------------6
Parts and Controls----------------------------------------------------------------------------7
How to Brew ------------------------------------------------------------------
Helpful Hints------------------------------------------------------------------------------------9
Cleaning & Maintenance ------------------------------------------------------------------10
Troubleshoong------------------------------------------------------------------------------13
Technical Data---------------------------------------------------------------------------------13
----------------------------------5
----------------8
2
Page 3
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should be followed, including the
following:
1. Read all instructions before using.
2. Do not touch hot surfaces. Use handles and knobs when available. Scalding may occur if the
coffee brewer is moved or opened or K-Cup® Pack is disturbed during brewing cycles.
3. This appliance must be properly installed and located in accordance with these instructions
before it is used.
4. The use of accessory attachments not recommended by the appliance manufacturer may result
in fire, electrical shock or injury to persons.
5. Do not place on or near a hot gas or electric burner, or in a heated oven.
6. Do not use outdoors.
7. To protect against fire, electric shock and injury, do not immerse cords, plugs or the appliance in
water or any other liquid.
8. Use only water in this appliance! Do not put any other liquids or foods in the Water Reservoir.
9. To disconnect, unplug power cord when not in use and before cleaning. Allow to cool before
putting on or taking off parts, and before cleaning the appliance.
10. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions
or is damaged in any manner. Contact your Customer Service to arrange for replacement or
repair.
11. Do not let the cord hang over the edge of the table or counter, or touch hot surfaces.
12. Close supervision is necessary when any appliance is used by or near children.
13. Do not open the brewer while brewing is in progress.
14. Do not use appliance for other than intended use.
15. To disconnect, turn any control to “off,” then remove plug from wall outlet.
16. Risk of Fire or Electric Shock. Do not open. No user serviceable parts inside. Repair should be
done by authorized service personnel only.
17.Do not open the brewer head or take away the cup until the size serving button stop flashing.
3
Page 4
CAUTION: There two sharp needles that puncture the K-Cup® pack, one above the
K-Cup® Pack Holder and the other in the bottom of the K-Cup® Pack Holder. To avoid
risk of injury, do not put your fingers in the K-Cup® pack assembly Housing.
CAUTION: There is extremely hot water/steam in the K-Cup® Pack Holder during the
brew process. To avoid risk of injury, do not lift the handle or open the K-Cup® pack.
Assembly Housing during the brewing process.
WARNING: To reduce the risk of fire or electric shock, do not remove any service
covers. There are no user serviceable parts inside the coffeemaker. Only authorized
personnel should repair the coffeemaker.
Please read ALL of the instructions in this manual carefully before you begin to use
this appliance. Proper care and maintenance will ensure a long life and a trouble-free
operation for this appliance. Please save these instructions and refer to them for
cleaning and care tips.
Servicing should be performed by an authorized service facility.
SAVE THESE INSTRUCTIONS
4
Page 5
SPECIAL CORD SET INSTRUCTIONS
1. A short power supply cord is provided to reduce the hazards resulting from
becoming entangled in, or tripping over, a longer cord.
2. An extension cord may be purchased and used if care is exercised in its use.
3. If an extension cord is used, the marked electrical rating of the extension cord
must be at as great as the electrical rating of the appliance. If the appliance is of the
grounded type, the extension cord should be a grounding type 3-wire cord. The
resulting extended cord must be arranged so that it will not drape over a countertop
or tabletop where it can be pulled on by children or tripped over accidentally.
4. THIS PRODUCT IS FOR HOUSEHOLD USE or HOSPITALITY USE ONLY
The plug of this appliance is subject to usage for household or hospitality:
For household use, the appliance is equipped with 2-wire polarized type plug& SPT-2
power supplier cord.
While for household and hospitality use, the appliance is equipped with 3-wire
grounding plug with HPN power supply cord.
For 2-wire polarized type plug:
This appliance has a polarized plug (one blade is wider than the other). To reduce the
risk of electric shock, this plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not modify the plug in any way.
Notes on this operating manual
This operating manual cannot cover all possible circumstances. For further
information or in case of problems not adequately covered in this operating manual,
please contact the service center. Please keep this operating manual safe and pass it
on to the next user.
5
Page 6
What’s in the Box
− Remove your coffee brewer from its packaging
− Aer unpacking, please check that the following parts are included:
1. Coffee Brewer
2. Manual
Note:
− Check that your home power supply voltage is the same as marked on the
machine rang plate
− Destroy all the plasc bags to prevent danger to children!
Tip:
Keep the packaging boxes for transporng the machine
(e.g. for removals, servicing, etc.)
Before the First Use
Cauon: improper handling of electrical equipment is dangerous and can be lethal.
Please pay aenon to the safety safeguards in this manual, in parcular the
following:
• Danger of scalding: beware of hot water
• Do not operate the machine without water
• Hot water may drop during pre-heang. Do not put your hands under the
dispenser.
• Do not open the handle when the machine is brewing.
• Always unplug the power plug
• Only use the machine in a dry room
before cleaning the machine
6
Page 7
1
3
4
5
6
12
11
9
7
8
1
0
2
The exclama
the presence of important opera
literature accompanying the appliance.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intend
to alert the user to the presence of un-insulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude to cons
electric shock to persons.
on point within an equilateral triangle is intended to alert the user to
ng and maintenance (servicing) instruc ons in the
ed
tute a risk of fire or
Parts and Controls
NO. Name
1 Brewer Head
2 Water Filter
3 Capsule Holder
4 Main Body
5 Drip Tray Plate
6 Base
7 Handle
8 Outlet/Gasket
9 Boiler
10 Dispenser
11 ON/OFF Bu on
12 Drip Tray
7
Page 8
How to Brew
1. Place Brewer upright on a flat surface, remove all product packaging
and plug into outlet.
2. Li
up the brewer head.
3. Fill with the water into the boiler to the MAX Level.
Insert a chosen K-CUP® pack into the K-cup® Pack Holder.
Do not peel off the foil cover of the K-cup® pack.
CAUTION: Avoid the sharp piercing pin inside the brew head.
(It will be hidden when the handle is opened)
as shown fig.2
4. Place the cup under th
as shown fig.3
5. Close by pressing down on top of the brew head h
NOTE: K-Cup® pack will be punctured when closing the brew head.
Please make sure the Brewer Head is completely closed.
Filter for use with ground coffee is not included.
Can be purchased separately.
6. Press the ON/OFF bu
the coffee. The light around the bu
the brewer is brewing. The brewer stop
the light is off a
as shown fig.5
er hot water is pumped out completely.
7. Your delicious coffee is ready.
8. Before opening the brewer head,
completely.
9. Remove the used K-cup® from the brewer as per the figure. Keep your hands away
from the hot water outlet.
as shown fig.1
fig.1
e dispense on the drip tray.
andle.
as shown fig.4
on to start preparing and brewing
on keeps flashing while
s automa
always let residual drips/steam to escape
cally when
as shown fig.6
fig.2
fig.3
fig.4
fig.5
fig.6
8
Page 9
Caution: Do not open the handle when the machine is brewing. If the
brewer is opened unintentionally the pump will stop the brewing and all
illumination lights will be lit indicating danger of scalding and hot water
spitting from the brewer head.
Close the handle immediately to its position.
Helpful Hints
• Initial Cleansing Brew – Before you use your Brewer for the first time, perform an
initial cleansing brew by running clean water through the brew cycle without using a
K-Cup® pack.
• One Cup at a Time – Your new Brewer makes one fresh beverage at a time.
• The Right Water Makes a Difference – For the best tasting gourmet coffee, tea or
hot cocoa, we recommend using bottled or filtered water. We do not recommend
using distilled or reverse osmosis water. Water quality varies from place to place. If
you notice an undesirable taste in your cup of coffee such as chlorine or other
mineral taste, we recommend you consider using bottled water or water from a
filtration system.
• Brewing Into a Tall Mug – To brew into a tall mug, simply remove the Drip Tray
Assembly and place the tall mug on the Drip Tray Base.
• The Drip Tray – Any liquid overflow (from your cup or the Cold Water Reservoir)
will be caught in the Drip Tray. Be sure to empty the Drip Tray. The Drip Tray has a
snug fit to ensure it stays put in transit.
• Clean Your Brewer Regularly – To keep your Brewer looking and performing its best,
be sure to clean the external and internal components on a regular basis. See page
10 for more information.
• De-Scaling – Mineral content in water varies from place to place. Depending on
the mineral content of the water in your area, calcium deposits or scale may build up
in your Brewer. Scale is non-toxic, but left unattended, it can hinder Brewer
performance. De-scaling your Brewer helps maintain the heating element and other
internal parts of the Brewer that come in contact with water.
• Storing – When storing your Brewer, carefully empty the Drip tray. Store your
Brewer upright in a safe, dry, frost-free environment.
9
Page 10
Cleaning and Maintenance
Cleaning External Parts
IMPORTANT: Make sure the Brewer is unplugged before cleaning. Regular cleaning of
the Brewer’s external components is recommended. Allow to Cool.
1. Never immerse the Brewer in water or other liquids. The Housing and other
external components may be cleaned with a soapy, damp, non-abrasive cloth.
2. The Drip Tray can accumulate liquids. The Drip Tray and Drip Tray Plate should be
periodically inspected and cleaned with a damp soapy nonabrasive lint free cloth.
The Drip Tray and Drip Tray Plate should not be put into the dishwasher. To remove
the Drip Tray Assembly, simply slide it toward you, keeping it level at all times to
avoid spilling.
Cleaning the K-Cup® Pack Holder Assembly
1. Clean the Parts – The K-Cup® Pack Holder Assembly can be placed onto the top
shelf of a dishwasher. NOTE: Use low temperature cycles in the dishwasher. To
remove K-Cup® from the Brewer, lift the front face of the Brewer.
Grasp the top of the K-Cup® Pack Holder with one hand and turn clockwise to unlock.
After cleaning, align the opening of the bottom to the rib of the holder and turn
counter-clockwise to lock
2. Clean the Funnel – The Funnel can be removed from the K-Cup® Pack Holder by
pulling on it until it snaps off. The Funnel is dishwasher safe. To replace it, just snap it
back onto the K-Cup® Pack Holder Assembly.
3. Clean the Exit Needle – The Exit Needle is located on the inside bottom of the
K-Cup® Pack Holder Assembly. Should a clog arise due to coffee grinds, it can be
cleaned using a clean household tool. Remove K-Cup® Pack Holder Assembly and
detach Funnel. Insert the household tool into the Needle to loosen the clog and push
it out. The K-Cup® Pack Holder is dishwasher safe.
CAUTION: There are sharp needles that puncture
the K-Cup® Pack above the K-Cup® Pack Holder and
in the bottom of the K-Cup® pack Holder. To avoid
risk of injury, do not put your fingers in the K-Cup®
Pack Assembly Housing.
10
Page 11
Cleaning Brewer Head
The brewer head can be removed from the brewer directly. Should a clog arise due
to coffee grinds, it can be cleaned using a clean household tool or using the water to
wash directly. This part is not dishwasher safe.
Caution: WHEN REMOVING WATER FROM
THE BOILER/WATER RESEVOIR AVOID
GETTING ON/OFF BUTTONS WET.
Storage
Thoroughly dry all parts of the coffeemaker before storing and take care to ensure
that you store your Brewer in a safe and frost free environment. It is suggested to
store your Brewer in the upright position. If you store the Brewer in a cold
environment, you run the risk of condensation freezing inside the Brewer and
causing damage. When you prepare to use it after storage, we recommend wiping
the boiler & other external parts with a damp lint-free cloth. If your Brewer has been
in an environment below freezing, please be sure to let it warm to room temperature
for 2 hours before using.
De-Scaling Your Brewer
Mineral content in bottled or filtered water varies. Depending on the mineral content
of the water, calcium deposits or scale may build up in your Brewer. Scale is non-toxic
but left unattended, it can hinder Brewer performance. Descaling your Brewer helps
maintain the heating element, and other internal parts of the Brewer that come in
contact with water.
The Brewer should be de-scaled every 3-6 months to ensure optimal performance or
when there are white deposits in the reservoir. It is possible for calcium deposits to
build up faster, making it necessary to de-scale more often.
11
Page 12
De-scaling Your Brewer:
Mineral content in bottled or filtered water varies. Depending on the mineral content
of the water, calcium deposits or scale may build up in your Brewer. Scale is non-toxic
but left unattended, it can hinder Brewer performance. Descaling your Brewer helps
maintain the heating element, and other internal parts of the Brewer that come in
contact with water.
Step 1: Make sure you have at least 8 ounces of undiluted white vinegar on hand. You
will also need a 10 oz ceramic mug (do not use a paper cup) and access to a sink.
Step 2: Fill boiler with 8 ounces of undiluted white vinegar, place a ceramic mug on
the Drip Tray Plate.
Step 3: Close the brew head and perform a brew into the ceramic mug without
adding a K-Cup® pack.
Step 4: Start a brew but power off the Brewer just after it starts to dispense and then
allow it to sit for at least 30 minutes.
Step 5: After the prescribed period of time, perform a brew without adding a K-Cup®
pack. Empty the contents of the ceramic mug into the sink, becareful as contents
may be hot.
Step 6: Fill the boiler with 8 ounces of bottled water, close the brew head, place a
cup on the Drip Tray Plate and perform a brew.
Step 7: Repeat Step 6 three times using bottled water (with no K-Cup® pack in place)
to clean the Brewer plumbing and get rid of any residual taste from the vinegar. The
Brewer is now ready for normal use again.
12
Page 13
TROUBLESHOOTING YOUR SINGLE SERVE BREWER
Beyond these recommended cleaning and maintenance procedures this Brewer is
not user serviceable, for service please refer to the Warranty Card
PROBLEM CAUSE SOLUTION
Brewer does not have
power
Brewer will not brew The brew head hasn’t been
Brewing a par al cup
Coffee drops around
the brewer hold
when brewing.
Technical Data:
Rated Voltage:
Rated Frequency:
Rated Power: 800W
N.W./G.W.: 1.25/1.8 kg appr.
Pump Pressure: Max. 3 Bars
Water Tank Capacity: 10oz
Right for improvements changes are reserved in the interest of technical progress.
K-Cup® pack is a product of Keurig Inc, has no rela
distributors of this brewer.
Check to be sure that it is
plugged in securely.
closed.
1) K-Cup® pack Holder may be
clogged
2) Calcium or scale is built up in
the brewer.
Ground coffee stuck to Water
Outlet gasket as a result the
sealing is not good.
□ 120V AC □ 220-240V AC
50/60Hz
onship to the manufacturer or its
Plug into a different
outlet.
Close the brew head
handle
1) Clean K-Cup® pack
Holder if necessary and
rinse under faucet
2) De-scale the Brewer
Pull off the gasket gently
and rinse the gasket with
water, put it back gently
a er rinse.
13
Page 14
Made in China
Shenzhen Impression E-commerce Co.,Ltd
Booth No.3H012,Trading Plaza,No.5,Huanan city,Pinghu
Street,Longgang District,Shenzhen,China
Facebook Page: https//www.facebook.com/aicoks/
Website:www.aicok.cc
Loading...