Ag neovo LE-24, LE-27, LE-22 User Manual

LE-22, LE-24 & LE-27 LED-Backlit Display

User Manual

TABLE OF CONTENTS

SAFETY PRECAUTIONS. ................................................................................. 3

FOR YOUR SAFETY .................................................................................... 3

SPECIAL NOTES ON LCD MONITOR ...................................................... 5

BEFORE YOU OPERATE THE MONITOR .................................................... 6

FEATURES .................................................................................................... 6

CHECKING THE CONTENTS OF THE PACKAGE. ................................ 6

INSTALLATION INSTRUCTIONS ............................................................... 6

ADJUSTING THE VIEWING ANGLE. ........................................................ 7

CONNECTING CABLES .............................................................................. 8

GENERAL INSTRUCTIONS ...................................................................... 10

EXTERNAL CONTROLS ............................................................................ 10

OPERATING INSTRUCTIONS. ...................................................................... 11

FRONT PANEL CONTROL. ...................................................................... 11

HOW TO ADJUST A SETTING ................................................................. 12

ADJUSTING THE PICTURE...................................................................... 13

PLUG AND PLAY ........................................................................................ 15

TECHNICAL SUPPORT (FAQ) ....................................................................... 16

ERROR MESSAGE & POSSIBLE SOLUTION ....................................... 17

APPENDIX ......................................................................................................... 20

SPECIFICATIONS ....................................................................................... 20

FACTORY PRESET TIMING TABLE ....................................................... 22

CONNECTOR PIN ASSIGNMENT ........................................................... 24

PRODUCT DIMENSIONS .......................................................................... 27

2

FOR YOUR SAFETY

Before operating the monitor, please read this manual thoroughly. This manual
should be retained for future reference.

SAFETY PRECAUTIONS

FCC Class B Radio Frequency Interference Statement
WARNING: (FOR FCC CERTIFIED MODELS)

This device complies with Part 15 of the FCC rules.Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received,including interference that may
cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

NOTICE:

1. The changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to

comply with the emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modification to this equipment. It is the responsibilities of the user
to correct such interference.

WARNING:

To prevent fire or shock hazard, do not expose the monitor to rain or moisture.
Dangerously high voltages are present inside the monitor. Do not open the cabinet.
Refer servicing to qualified personnel only.

3

FOR YOUR SAFETY

PRECAUTIONS

• Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen
sink, laundry tub, swimming pool or in a wet basement.

• Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it
can injure a person and cause serious damage to the appliance. Use only

a cart or stand recommended by the manufacturer or sold with the monitor.
If you mount the monitor on a wall or shelf, use a mounting kit approved by
the manufacturer and follow the kit instructions.

• Slots and openings in the back and bottom of the cabinet are provided for
ventilation. To ensure reliable operation of the monitor and to protect it from
overheating, be sure these openings are not blocked or covered. Do not place
the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor
near or over a radiator or heat register. Do not place the monitor in a
bookcase or cabinet unless proper ventilation is provided.

• The monitor should be operated only from the type of power source indicated
on the label. If you are not sure of the type of power supplied to your home,
consult your dealer or local power company.

• The monitor is equipped with a three-pronged grounded plug, a plug with a
third (grounding) pin. This plug will fit only into a grounded power outlet as a
safety feature. If your outlet does not accommodate the three-wire plug,
have an electrician install the correct outlet, or ground the appliance safely.
Do not defeat the safety purpose of the grounded plug.

• Unplug the unit during a lightening storm or when it will not be used for long period
of time. This will protect the monitor from damage due to power surges.

• Do not overload power strips and extension cords. Overloading can result in
fire or electric shock.

• Never push any object into the slot on the monitor cabinet. It could short
circuit parts causing a fire or electric shock. Never spill liquids on the monitor.

• Do not attempt to service the monitor by yourself; opening or removing
covers can expose you to dangerous voltages and other hazards. Please
refer all servicing to qualified service personnel.

• To ensure satisfactory operation, use the monitor only with UL listed computers
which have appropriate configured receptacles marked between 100 - 240V
AC, Min. 5A.

• The wall socket shall be installed near the equipment and shall be
easily accessible.

4

FOR YOUR SAFETY

WEEE DECLARATION

Disposal of Waste Equipment by Users in Private Household in the
European Union.

This symbol on the product or on its packaging indicates that this
product must not be disposed of with your other household
waste.Instead, it is your responsibility to dispose of your waste
equipment by handing it over to a designated collection point for the
recycling of waste electrical and electronic equipment.The separate
collection and recycling of your waste equipment at the time of disposal

will help to conserve natural resources and ensure that it is recycled in

a manner that protects human health and the environment. For more

information about where you can drop off your waste equipment for

recycling, please contact your local city office, your household waste

disposal service or the shop where you purchased the product.

SPECIAL NOTES ON LCD MONITOR

The following symptoms are normal with LCD monitor and do not indicate a
problem.

NOTES

• You may find slightly uneven brightness on the screen depending on
the desktop pattern you use.

• The LCD screen has effective pixels of 99.99% or more. It may include blemishes
of 0.01% or less such as a missing pixel or a pixel lit all of the time.

• Due to the nature of the LCD screen, an afterimage of the previous screen may
remain after switching the image, when the same image is displayed for hours.
In this case, the screen is recovered slowly by changing the image or turning
off the Power Switch for hours.

• To declare the product is the Information Technical Equipment intended
primarily for use in the domestic environment.

• The monitor is for computer use and not marketed and intended for displaying
any television broadcast signals.

5

BEFORE YOU OPERATE THE MONITOR

FEATURES

• 54.69cm (21.5 inches) TFT Color LCD Monitor

59.94cm (23.6 inches) TFT Color LCD Monitor

68.6cm (27inches) TFT Color LCD Monitor

• Crisp, Clear Display for Windows

• Recommended Resolutions: 1920x1080@60Hz

• Ergonomic Design

• Space Saving, Compact Case Design

CHECKING THE CONTENTS OF THE PACKAGE

The product package should include the following items:

1. LCD Monitor

2. Owner’s Manual (including CD-ROM & Warranty Card)

3. Power Cord

4. D-Sub Cable

5. Audio Cable

6. Base

INSTALLATION INSTRUCTIONS

Install

Figure 1 Installation Instruction

6

BEFORE YOU OPERATE THE MONITOR

13cm

ADJUSTING THE VIEWING ANGLE

For optimal viewing it is recommended to look at the full face of the monitor, then
adjust the monitor’s angle to your own preference.
Hold the stand so that the monitor does not topple when you change the monitor’s

angle.
You are able to adjust the monitor as below:

Tilt angle：
LE-22\LE-24: -5° ~ 22°
LE-27: -5° ~ 23° Pivot angle： 0°~90°

Swivel angle：-160°~160° Height adjustment：

Figure 2 Adjusting the Viewing Angle

Note：

• Put the monitor on a flat surface.

• Hold the panel so that the monitor does not topple.

7

BEFORE YOU OPERATE THE MONITOR

Power Source:

1. Make sure that the power cord is the correct type required in your area.

2. This LCD monitor has an universal power supply that allows operation in either
100/120V AC or 220/240V AC voltage area (No user adjustment is required.)

3. Connect the AC-power cord into your LCD monitor’s AC-power-input. The AC
power cord may be connected to either a wall power outlet or the power outlet
socket on your PC, depending on the type of power cord supplied with your
LCD monitor.

CONNECTING CABLES

SIGNAL CABLE
Connecting the Signal Cable: Plug the Signal Cable one end to LCD monitor’s

―DSUB‖ socket, the other end to the computer’s VGA port and tighten the two
screws on the cable connector.
Connecting the DVI Cable: Plug the DVI Cable one end to LCD monitor’s ―DVI‖

socket, the other end to the computer's DVI port and tighten the two screws on
the cable connector.

Connecting the HDMI Cable: Plug the HDMI Cable one end to the output port of

HDMI video equipment, the other end to LCD monitor’s ―HDMI‖ socket.

Connecting the Power Cord: Connect the AC-power cord into your LCD

monitor’s ―AC-IN‖. The AC-power cord may be connected to either a wall power
outlet or the power outlet socket on your PC, depending on the type of power
cord supplied with your LCD monitor.

Connecting the Audio Cable: Connect the audio cable between the
monitor’s ―AUDIO-IN‖ socket and the PC’s audio output (green port).

8

BEFORE YOU OPERATE THE MONITOR

Figure 3 Connecting Cables

9