AG Neovo FST User Manual

5 Wire Analog Resistive Touchscreen
FST Series Product Specifications

FST Series Product Specifications

Table of Contents

1. Product Specifications...................................................................................................3

1-1. Product Applicable..............................................................................................................3

1-2. Structure..............................................................................................................................3

1-3. Environmental Specifications.............................................................................................. 3

1-4. Mechanical Characteristics.................................................................................................3

1-5. Electrical Characteristics.....................................................................................................3

1-6. Appearance.........................................................................................................................4

2. Testing Regulation..........................................................................................................5

2-1. Testing Regulation..............................................................................................................5

2-2. Environmental Specifications.............................................................................................. 5

2-3. Mechanical Characteristics.................................................................................................5

2-4. Electrical Characteristics.....................................................................................................5

2-5. Appearance.........................................................................................................................6

3. Reliability Condition.......................................................................................................7

3-1. Temperature Condition........................................................................................................7

4. Recommended Connector.............................................................................................7

4-1. Recommended Connector..................................................................................................7

5. Handling Notes ...............................................................................................................8

5-1. Precautions.........................................................................................................................8

5-2. Handling Notes ................................................................................................................... 8

5-3. Construction Notes ............................................................................................................. 8

5-4. Electrical & Software Notice................................................................................................8

5-5. Mounting Notes...................................................................................................................9

6. Warranty........................................................................................................................10

6-1. Warranty Period................................................................................................................10

6-2. Warranty Target.................................................................................................................10

6-3. Warranty Exceptions.........................................................................................................10

6-4. Tools..................................................................................................................................10

6-5. Changes............................................................................................................................10

7. Revision history............................................................................................................11

2 Rev. 2.0 ©2005 - 2006 DMC Co., Ltd.

FST Series Product Specifications

1. Product Specifications

1-1. Product Applicable

§ This specification is applied to the 5 wire analog resistive touchscreen: FST Series.

1-2. Structure

§ Dimensions, structure, and shape are referred on the drawing attached.

1-3. Environmental Specifications

Specification Value

Operating Temperature -20°C to 70°C (no condensation)

Operating Humidity

Storage Temperature -40°C to 80°C (no condensation)

Storage Humidity

Chemical Resistance

(top surface)

-20°C to 60°C Less than 90%RH (no condensation)
Exceeding 60°C 133.8g/m

-40°C to 60°C Less than 95%RH (no condensation)
Exceeding 60°C 142.9g/m3 (no condensation)

Toluene, Tricholoroethylene, Athetone, Alcohol,

Gasoline, Machine Oil, Ammonia, Glass Cleaner,

Mayonnaise, Ketchup, Wine, Salad Oil, Vinegar, Lipstick, etc.

3

(no condensation)

1-4. Mechanical Characteristics

Specification Value

Activation Force 0.05N to 0.8N

Operating Life

Light Transmittance Over 80% (typical value at full wavelength)

Surface Hardness Over 2H (by JIS pencil hardness)

Input (finger) 35,000,000 hits

Character Input (pen) 100,000 characters

1-5. Electrical Characteristics

Specification Value

Maximum Voltage DC6V
Maximum Current

Linearity

Terminal Resistance Bottom Electrode

Insulation Resistance Active Area Electrodes

Chattering Less than 10msec at ON/OFF.

Bottom Electrode 200mA

Between the Top an d Bottom 0.5mA

Under ±2%

(5% inside of active area after 9 points calibration.)

Over 20MΩ at 25V

Less than 200Ω

3 Rev. 2.0 ©2005 - 2006 DMC Co., Ltd.

FST Series Product Specifications

1-6. Appearance

§ Scratch, dust (W = width, L = length, D = average diameter = (longest + shortest) /2)

Item Size (mm) Length (mm) Acceptable Numbers Total

0.1≥W>0.05 4≥L 1pcs in φ30mm

Scratch

Dust

(Linear)

Dust

(Circular)

Applied only in the Active Area. Scratches or dusts in the outside of the Active Area are acceptable unless the
electrical characteristics are affected.

*1 Applied to the size of 14 inches or more.

§ Dirt
Acceptable if not noticeable on a black mat.

§ Tip, crack (t = glass thickness) (applicable only for the glass)

0.05≥W>0.03 10≥L 2pcs in φ20mm

0.03≥W 20≥L

Acceptable

0.1≥W>0.05 5≥L 2pcs in φ30mm

0.05≥W

0.4≥D>0.3 *1

Acceptable Acceptable

1pcs in Viewing Area *1

0.3≥D>0.2 2pcs in φ30mm

0.2≥D

Acceptable

Within 5pcs per

product.

Item Size (mm) Acceptable Numbers

Z

Corner

X

X

Y

Y

Side

Z

X

Y

Z

X

Y

Z

≤3

≤3

≤t

≤5

≤3

≤t

2pcs

/panel

2pcs
/side

Crack 0pcs (acceptable)

4 Rev. 2.0 ©2005 - 2006 DMC Co., Ltd.