This step-by-step process will help you configure your CXA. Capabilities that are
listed as standard come with the instrument at no additional charge. Tailor the
performance, exterior, and service packages to meet your requirements. Ordering
optional capabilities at the time of purchase provides the lowest overall cost. For
detailed specifications, refer to the CXA Signal Analyzer Specification Guide,
(literature number N9000-90016). For a summary of specifications, refer to the
CXA Signal Analyzer Data Sheet (literature number 5990-4327EN).
Step 1. Select maximum frequency range (required option; frequency range not upgradeable)
noitamrofnilanoitiddArebmunnoitpOnoitpircseD
Frequency range, 9 kHz to 3.0 GHzN9000A-503Comes standard with 10 MHz analysis bandwidth
Frequency range, 9 kHz to 7.5 GHzN9000A-507Comes standard with 10 MHz analysis bandwidth
Step 2. Choose an attenuator
noitamrofnilanoitiddArebmunnoitpOnoitpircseD
Electronic attenuator
Fine resolution step attenuator N9000A-FSAAllows 2 dB steps for the full 50 dB range of the electronic attenuator
Standard
Step 3.$GGDSUHDPSOLÀer (preamplifiers are not sta
3UHDPSOLÀ er, 100 kHz to 3.0 GHz N9000A-P03+20 dB nominal: 100 kHz to 3.0 GHz
Preamplifier, 100 kHz to 7.5 GHzN9000A-P07+20 dB nominal: 100 kHz to 7.5 GHz
10 dB steps, 0 to 50 dB
n
dard)
noitcetedlangislevelwolroFrebmunnoitpOnoitpircseD
Step 4. Add optional features
noitpircseD
Basic precompliance EMI features
N9000A-EMC
rebmunnoitpO
Perform precompliance EMI measurements with CISPR 16-1-1
Note: The last two letters of ordering numbers indicate the license type. FP stands for Fixed Perpetual. The CXA only offers fixed perpetual.
Description Ordering number
Additional information
dexiF
sesneciL
Spectrum analyzer StandardTraditional spectrum analysis; plus many new and enhanced
measurment applicationfunctions; power measurements based on industry speciÀcations;
elbammargorpIPCS
Analog demodulation
W9063A-2FP
measurement application
Phase noise measurementW9068A-2FP
Adds one-button measurement for AM/FM/PM demodulation
with metrics, tune and listenand AF spectrum
Adds one-button measurements for analyzing phase noise in
applicationfrequency domain (log plot) and time domain (spot frequency)
1RLVHÀ gure measurement W9069A-1FP$GGVRQHEXWWRQPHDVXUHPHQWVIRUQRLVHÀ gure, gain, and
application(requiresUHODWHGPHWULFVUHTXLUHVSUHDPSOLÀHUWRPHHWVSHFLÀcations;
Àilpmaerper)works with Agilent N400xA Series smart noise sources and
secruosesionseireS643
VXA vector signal analyzer
89601X
Brings vector signal analysis to the test rack with SCPI
measurement applicationprogramming and hardkey/softkey interface.
See
www.agilent.com/find/vxa
for more information
VXA Basic VSA-Lite 89601XFP-205Adds high resolution FFT-based spectrum and time-domain
, time gating, AM/FM/PM demodulcation, statisticalstnemerusaem
redrolaitinitanoitpoderiuqer;stnemerusaem
of 89601X
VXA X-Series connectivity89601XFP-333Required option at initial order of 89601X
)502seriuqer(
VXA vector modulation 89601XFP-AYAAdds general purpose digital modulation for 2-16 FSK, 2-8 PSK
analysis(requires 205/333) and 16-1024 QAM as well as over 15 additional formats
MATLAB
Analysis Package
®
- Basic Signal N6171A-M01Adds MATLAB software environment and the Instrument
Control Toolbox – use this configuration to configure, control,
MATLAB - Standard Signal N6171A-M02Adds MATLAB Basic Signal Package plus the Communications
Analysis PackageToolbox and Signal Processing Toolbox – use this configuration
udomedroretlifot
nemurtsniehtretfa
deppihst
emetamotua,slangisetal
,stne
merusa
MATLAB - Advanced SignalN6171A-M03Adds MATLAB Standard Signal Package plus the Filter Design
Analysis PackageToolbox, RF Toolbox, and SystemTest – use SystemTest
Step 6.Add the following options if you choose 89601A with CXA
noitamrofnilanoitiddArebmunnoitpOnoitpircseD
Basic VSA software
Hardware connectivity
Flexible vector modulation analysis
®
cdma2000
analysis
1xEV-DO modulation analysis
TD-SCDMA modulation analysis
TEDS modulation analysis & test
RFID modulation analysis
Link to ADS software
Link to MathWorks Simulink Simulation
and Model-Based Design
/ 1 x EV-DV modulation
89601A-200
89601A-300
89601A-AYA
89601A-B7T
89601A-B7W
89601A-B7X
89601A-BHA
89601A-BHC
89601A-105
89601A-106
Required
Required
Step 7.Choose physical instrument configuration
noitpircseD
Bench top configuration
Portable configuration
StandardProvides two side carrying straps, four rear feet and four bottom
N9000A-PRC
noitamrofnilanoitiddArebmunnoitpO
feet
Provides a convenient, pivoting carrying handle and rubber
protective corners and end guards. This configuration is
intended for applications requiring more rugged packaging.
Enhances the usability of the Windows®XP Professional operating system
Ultra-durable wheeled carrying case offers maximum protection
ytilibatropdna
Keyboard, USB interfaceN9000A-KYB
1
Enhances the usability of the Windows®XP Professional operating system
)hcuopyrosseccaGAB-A0009NtiftonseoD:etoN(
US 65 Key USB keyboardN9000A-KB2
1
Compact design fits in N9000A-BAG accessory pouch for
egarotstneinevnoc
Accessory pouchN9000A-BAG
1
Easily store and carry the N9000A-KB2 keyboard and USB mouse
hcuopelbahcattasihtni
Minimum loss pad, 50 to 75 Ohms N9000A-MLP
50-ohm Type-N male to 75 ohm BNC female adapter
(Type-N to BNC)Frequency range: 9 MHz to 2 GHz
Bd11dnabd02:ssolnrutertuptuo/tupnI
Bd7.5:ssolnoitresnI
N9000A-1CM
rsddAtnuomkcaR
AXCehtotsegnalftnuomkca
Front handles N9000A-1CNAdds front handles to the CXA
Rack mount with handlesN9000A-1CPAdds rack mount flanges and front handles to the CXA
N9000A-1CR
tnemurtsniehtotedilskcargnitlit-nonasddAedilskcaR
Getting Started Guide and StandardUS – English localization.
User’s Guide printed manualsAll user documentation is included in the CXA embedded context help
odnaAXCehtedisnimetsys
:morfdedaolnwodebnacnoitatnemucodresU
www.agilent.com/find/CXA_manuals
Getting Started Guide
N9000A-AB2
Simplified Chinese localization.
simplified Chinese localized
printed manual
For more information visit: www.agilent.com/find/accessories
1. Please see page 10 for a picture of this option
Step 9. Choose warranty length
noitamrofnilanoitiddArebmungniredrOnoitpircseD
1-year return-to-AgilentStandard1-year warranty is included at no additional charge
warranty and service(R-51B-001-C)
3-year return-to-AgilentR-51B-001-3C
warranty and service
Recommended upgrade
.tnemurtsniehthtiwdeppihssitahtDCan
5
Step 10. Add calibration, technical training, and support
DescriptionOrdering numberAdditional information
Commercial calibrationN9000A-UK6Calibration certificate only available at time of
certificate with test datainstrument purchase; only provides measurement results
Calibration service:R-50C-011-3Agilent tests your instrument against its original specifications, and
Service: remote scheduled PS-S10-100Hourly phone-in technical support service designed to help you
nadnatsrednuecnatsissaytivitcudorp
sseccabeWdna
Service: 1-day start-up assistance PS-S20-01Training on how to operate your instrument effectively; recommended
Service: productivity assistancePS-S20-100Daily instrument and application consulting using your equipment and
tset-rednu-ecived
Service:PS-X10-100Application specific technical assistance
custom engineering service
Other calibration options may be available. For more information on calibration go to: www.agilent.com/find/calibration
For more information on training and application support services go to: www.agilent.com/find/training
enohptneinevnochguorhttnempiuqeruoyetarepod
dedivorposl
6
Instrument Upgrades
Upgrade your existing CXA
In order to utilize the fast upgrade process, purchase these additional options within one
year of original purchase. Any upgrades purchased after one year may require calibration.
1. Place an order for the upgrade with Agilent and request to receive the option upgrade
HQWLWOHPHQWFHUWLÀ cate through email
5HGHHPWKHFHUWLÀ cate through the WHEE\IROORZLQJWKHLQVWUXFWLRQVRQWKHFHUWLÀ
,QVWDOOWKHOLFHQVHÀ le and latest software in the CXA
4. Begin using the new capability
Installation and testing information is available at: www.agilent.com/find/CXA_upgrades
DescriptionUpgrade numberAdditional information
3UHDPSOLÀ er, 3.0 GHzN9000AK-P03
3UHDPSOLÀ er, 7.5 GHzN9000AK-P07
cate
Basic EMC functionality
Fine resolution step attenuator
N9000AK-EMC
N9000AK-FSA
Portable conÀgurationN9000AK-PRC
Front panel cover, additionalN9000AK-CVR
USB DVD-ROM/CD-R/RW drive
N9000AK-DVR
USB storage device, 4 GBN9000AK-EFM
Hard transit caseN9000AK-HTC
Keyboard, USB interfaceN9000AK-KYB
US 65 key USB keyboardN9000AK-KB2
Mouse, USB interface
N9000AK-MSE
1
,MC1htiwelbitapmoctoN
RC1,NC1,PC1
1
1
1
1
1
)hcu
op
1
ÀngisedtcapmoC ts in
ehtfoytilibasuehtsecnahnE
seoD:etoN(metsysgnitarepo
Àtont N9000A-BAG accessory
lanisseforPPXswodniW
yrosseccaGAB-A0009N
egarotstneinevnocrofhcuop
CXA Instrument Software
N9000AK-SWM
on USB media
1.Please see page 10 for a picture of this option
7
Instrument Upgrades (continued)
DescriptionUpgrade numberAdditional information
Accessory pouchN9000AK-BAG
Minimum loss pad, 50 to 75 ohmsN9000AK-MLP
(Type-N to BNC)
6 USB 2.0 type-A ports connect up to six USB devices to the CXA without using
a hub; CXA behaves like a host controller. USB 2.0
compatible ports:
• two on front
• four on the back
1 USB 2.0 type-B port CXA behaves like a USB device(client);
USB 2.0 compatible port
100Base- T LAN interface
GPIB: Controller or Device
LXI: Class-C compliant
Standard software
Open Windows XP Professional operating system including
• Remote Desktop, Internet Explorer File Explorer and
other standard programs
• Embedded web server (LXI class-C compliant)
• Adobe
®
Reader
Instrument weight and dimensions
Weight
Bench top configuration:14.0 kg (30.8 lbs)
Portable configuration:15.0 kg (33.0 lbs)
Dimensions (bench top configuration)
Height:17.7 cm (7.0 in)
Width:42.6 cm (16.8 in)
Length:36.8 cm (14.5 in)
Display
Diagonal:21.4 cm (8.4 in)
Transit case weight and dimensions
Weight (empty)20.4 kg (45 Ibs)
Dimensions
Height:42.6 cm (16.8 in)
Width:68.5 cm (27 in)
Length:73.6 cm (29 in)
9
Accessories
Front panel protective
cover included with
new instrument
purchase; for
additional covers
– N9000AK-CVR
Keyboard,
USB interface
– N9000A-KYB
Smaller keyboard,
USB interface
– N9000A-KB2
Mouse, USB interface
Standard
USB storage device
Standard
Kit to add portable
configuration
– N9000AK-PRC
USB DVD-ROM/CD-R/RW drive
– N9000A-DVR
N9000A CXA signal analyzer and N9000A-BAG optional bag
Hard transit case – N9000A-HTC
Portable configuration includes pivoting carrying handle and protective
corner rubber guards (front protective cover comes standard)
– N9000A-PRC
10
Literature Resources
eltiterutaretiL
Agilent CXA Signal Analyzers
Brochure
Data Sheet
Configuration Guide
For more information on the CXA, visit: www.agilent.com/find/CXA
For information about X-Series applications, visit: www.agilent.com/find/xseries_apps
rebmunerutaretiL
5990-3927EN
5990-4327EN
5990-4341EN
11
www.agilent.com/find/emailupdates
Get the latest information on the products
and applications you select.
www.lxistandard.org
LXI is the LAN-based successor to GPIB,
providing faster, more efficient connectivity.
Agilent is a founding member of the LXI
consortium.
cdma2000 is a registered certification mark of
the Telecommunications Industry Association.
Used under license.
WiMAX, Mobile WiMAX, and WiMAX Forum are
trademarks of the WiMAX Forum.
Windows and MS Windows are U.S.registered
trademarks of Microsoft Corporation.
Adobe, the Adobe Logo, Acrobat and the Acrobat
Logo are trademarks of Adobe Systems
Incorporated.
MATLAB is a registered trademark of
The MathWorks, Inc
Remove all doubt
Our repair and calibration services will get
your equipment back to you, performing
like new, when promised. You will get
full value out of your Agilent equipment
throughout its lifetime. Your equipment
will be serviced by Agilent-trained
technicians using the latest factory
calibration procedures, automated repair
diagnostics and genuine parts. You will
always have the utmost confidence in
your measurements.
Agilent offers a wide range of additional
expert test and measurement services for
your equipment, including initial start-up
assistance, onsite education and training,
as well as design, system integration, and
project management.
For more information on repair and
calibration services, go to:
www.agilent.com/find/removealldoubt
www.agilent.com
www.agilent.com/find/cxa
For more information on AgilentTechnologies’
products, applications or services, please
contact your local Agilent office. The
complete list is available at:
www.agilent.com/find/contactus
Americas
Canada(877) 894-4414
Latin America305 269 7500
United States(800) 829-4444