Agilent HPLC Quick reference
HPLC Injection Systems:
Agilent 1100 Series Autosamplers and Agilent 220 Micro Plate Sampler
Quick reference
For detailed information
refer to brochure 5968-9103E
January 2001
Application
area
Features
Sample
capacity
Agilent 1100 Series
manual injector
Order: G1328A
The ideal solution for
laboratories expanding to
HPLC. This injector for low
throughput sampling is
designed for general HPLC
users.
The Agilent 1100 Series
manual injector with a long-life
Rheodyne® 7-port sample
injection valve is easy to use
and maintain.
Rheodyne® is a US registered trademark
of Rheodyne L.P.
Agilent 1100 Series
standard autosampler and
thermostatted version
Order: G1313A and G1327A
Designed for the reliability,
safety, and ease of use needed
in pharmaceutical routine tasks
and quality control, as well as
for environmental and food
analyses.
• Reliable injections from
0.1µl to 100 µl
• Easy adaption for injection
volumes up to 1500 µl for applications ranging from microbore to semipreparative
chromatography
• Low internal volume of 300 µl
for the minimum contribution
to a system’s total internal
volume
• Overlapped injections for
increased productivity
• 100 × 2-ml vials/standard tray,
• 40 × 2-ml vials/standard tray,
• 15 × 6-ml vials/half tray
• Microvials (100 or 300 µl) with
sleeves
Agilent 1100 Series
thermostatted micro
autosampler
Order: G1387A
Designed to perform capillary
LC, allows injection of sample
volumes from nl to µl ranges.
• A micro Rheodyne® valve and
the optimized design of the
needle seat, loop and seat
capillaries minimize
dispersion
• A high-resolution metering
device offers resolution ten
times better than a standard
autosampler
• Bypass operation enables
low delay volume
• 100 × 2-ml vials/standard tray,
• Microvials (100 or 300 µl) with
sleeves
Agilent 1100 Series
well-plate autosampler and
thermostatted version
Order: G1367A and G1368A
Adds maximum flexibility and
fast injection cycles to your
Agilent LC system. Whenever
high sample throughput and
speed of analysis are points to
consider, this is the autosampler
to choose.
• Increased sample injection
speed for high sample
throughput
• Overlapped injections for
increased productivity
• Minimal delay volumes for
rapid gradients and fast equilibration when bypassing the
autosampler after sample
injection.
• Flexible and convenient sample
handling with different types of
sample containers. 384-well
plates allows you to process
up to 768 samples unattended.
• 2 well plates (96 and 384) plus
10 additional 2-ml vials
• 100 × 2-ml vials/standard tray
• 40 × 2-ml vials/half tray
• Microvials with sleeves
Agilent 1100 Series
micro well-plate autosampler
and thermostatted version
Order: G1377A and G1378A
Designed to perform capillary
LC, allows injection of sample
volumes from nl to µl ranges.
• Increased sample injection
speed for high sample
throughput
• Flexible and convenient
sample handling with
different types of sample
containers. 384-well plates
allows you to process up to
768 samples unattended.
Additionally the sampler
offers all features of G1387A.
• 2 well plates (96 and 384)
plus 10 additional 2-ml vials
• 100 × 2-ml vials/standard
tray
Agilent 220 micro plate sampler
Order: G2250A
Highest sample capacity, which
increases sample throughput and
shortens response time. This is
especially useful for drug discovery,
combinatorial chemistry, medicinal
chemistry and natural products
analysis.
• The flexibility of sampling and
fraction collection from the same
device. This gives you a versatile
tool to support screening, analysis
and research.
• Fast cycle times, including a flow
injection analysis (FIA) mode
where a well can be analyzed
every 30 seconds.
• Unattended high throughput with
the ability to store and inject over
4,600 samples (using 384-well
plates).
• 12 standard well plates including:
96-well plates, 96-deep-well
plates, 384-well plates, PCR, tubes,
2-ml vials, test tubes, and sealed
and unsealed vials
Thermostatting
capacity
www.agilent.com/chem
Peltier temperature control
from 4 to 40 °C for up to 100 2-ml
vials containing thermally-labile
samples
Peltier temperature control
from 4 to 40 °C for up to 100 2-ml
vials containing thermally-labile
samples
Peltier temperature control from
4 to 40 °C for well plates and 2-ml
vials containing thermally-labile
samples
Peltier temperature control
from 4 to 40 °C for well plates
and 2-ml vials containing
thermally-labile samples
Copyright © 2001 Agilent Technologies
Printed in Germany, January 1, 2001
Publication Number 5988-1804EN
Loading...