Agilent 7890B GC Quick Reference Guide

Quick Reference Guide
Agilent 7890B GC Supplies
Agilent supplies for Agilent instruments
Agilent is committed to optimizing your laboratory’s productivity, so we have produced this list of the most commonly ordered supplies and parts for the 7890B GC. Keep this list handy so you can quickly find the supplies you need and minimize instrument downtime.
Save time finding instrument supplies by using our interactive parts finder tool at:
www.agilent.com/chem/partsfinder
Sample introduction supplies
Vials
A-Line crimp top vial, 2 mL, with write-on spot
A-Line screw top vial, 2 mL, with write-on spot
Crimp cap, PTFE/white silicone septum Silver 5182-0552
Screw cap, PTFE/white silicone septum Blue 5190-7021
Color
Clear 5190-9591
Amber 5190-9592
Clear 5190-9589
Amber 5190-9590
Part No.
Gas supplies
Gas Clean Filters
Gas Clean FID filter kit (includes 4 filters for carrier gas and detector gases, 1/8”)
Replacement Filters
Part No.
CP736530
Part No.
Inlet supplies
Inlet Septa Qty. Part No.
BTO septa Bleed and temperature optimized. Maximum inlet temp 400 °C. Change after 200-300 injections. Ideal for MS.
Advanced Green septa Popular all purpose septa. Maximum inlet temp 350 °C.
Long-life septa Up to 400 injections. Maximum inlet temp 350 °C.
Other Inlet Supplies Qty. Part No.
Non-stick fluorocarbon O-rings Change with every liner to ensure leak-free seal.
Gold seals Replace regularly to ensure leak-free seal and maintain chromatographic performance.
Split vent trap PM kit Includes one cartridge and two O-rings. Replace at least annually to prevent buildup and protect lab from emissions.
Gold seal with washer
Ultra Inert gold seal with washer
50/pk 5183-4757
100/pk 5183-4757-100
50/pk 5183-4759
100/pk 5183-4759-100
50/pk 5183-4761
100/pk 5183-4761-100
10/pk 5188-5365
100/pk 5190-2269
1/pk 5188-5367
10/pk 5190-2209
1/pk 5190-6144
10/pk 5190-6145
5188-6495
Inlet Liners
Split straight liner with glass wool
Split single taper liner with glass wool
Splitless single taper liner with glass wool
*Ultra Inert liners have a pre -installed O -ring.
Fritted Liners Qty. Part No.
Splitless single taper, Ultra Inert with glass frit
Universal single taper, Ultra Inert with glass frit
990 µL, 4 mm id
900 µL, 4 mm id
900 µL, 4 mm id
1/pk 5190-5112
5/pk 5190-5112-005
25/pk 5190-5112-025
1/pk 5190-5105
5/pk 5190-5105-005
25/pk 5190-5105-025
Qty.
1/pk 5190-2294 19251-60540
5/pk 5190-3164 5183-4691
25/pk 5190-3168 5183-4692
1/pk 5190-2295
5/pk 5190-3165
25/pk 5190-3169
1/pk 5190-2293 5062-3587
5/pk 5190-3163 5183-4693
25/pk 5190-3167 5183-4694
Ultra Inert Deactivation*
Agilent Original Deactivation
5183-4647 5183-4711
5183-4701 5183-4712
5183-4702 5183-4713
2
Column connection supplies
Installing your GC column carefully and correctly is a critical task to ensure a high-quality chromatogram. Need a refresher? Check out our column installation video. Make a clean cut with Agilent’s ceramic scribes (5181-8836). Also check out our
GC Column Selector Tool, which helps you navigate to the best column choice for your application. Guidance can be by
manufacturer’s part number cross-reference, desired phase chemistry, USP designation, regulatory method, or by application.
Ferrules Ferrule ID Fits Column ID Part No.
250 µm 320 µm 530 µm
0.4 Yes No No 500-2114
Graphite*
Vespel graphite
Flexible Metal**
Gold-plated***
*Do not us e graphite ferrules with MS or oxyg en-sensitive detectors.
**Use Flexible Metal ferrules in GC inlets and no n-MS detectors with a deep well c olumn nut (05921-21170). ***Reco mmended for CF T usage only.
0.5 Yes Yes No 5080-8853
1.0 No No Yes 5080-8773
0.4 Yes No No 5181-3323
0.5 No Yes No 5062-3514
0.8 No No Yes 5062-3512
0.4 Yes No No G3188-27501
0.5 No Yes No G3188-27502
0.8 No No Yes G3188-27503
0.4 Yes No No G2855-28501
0.5 No Yes No G2855-28502
0.8 No No Yes G2855-28503
Column Nuts Ferrule Compatibility Part No.
Graphite
Standard Yes Yes No 5181-8830
Deep well No No Yes 05921-21170
Self-Tightening No Yes No G3440-81011
Vespel Graphite
Flexible Metal
Self-Tightening Column Nuts Part No.
Column nut, MSD G3440-81013
Column nut, inlet/detector G3440-81011
Short graphite/polyimide ferrules
0.1 to 0.25 mm columns 5181-3323
0.32 mm columns 5062-3514
0.45 to 0.53 mm columns 5062-3512
Detector supplies
FID Supplies Details Part No.
Jets
MSD Supplies Details Part No.
MSD transfer line interface nuts
MSD ferrules**
EI filament G7005-60061
*Use with shor t vespel/graphite ferrules (5181-3323 or 5062- 3514). **Use only with brass nu ts (05988-20066). Not suitable for Self-Tightening nuts.
FID jet, universal fit
Igniter (glow plug) assembly with O-ring 19231-60680
Collector body G1531-20690
Collector body, Hastelloy G1531-21090
Collector insulator G1531-20700
Brass 05988-20066
Self-Tightening* G3440-81013
100 µm column id 5062-3507
250 µm column id 5062-3508
320 µm column id 5062-3506
0.011 inch id 5200-0176
0.018 inch id 5200-0177
0.030 inch id 5200-0178
Handheld Diagnostics Tools
ADM Flow Meter G6691A
Annual replacement cartridge for ADM Flow Meter
Electronic leak detector G3388B
Part No.
G6692A
3
Agilent supplies—to help you get the results you need
For greater confidence in your chromatography results, you can optimize your total system with quality Agilent columns and supplies. Our wide range of columns, supplies, kits, and accessories is designed, manufactured, and tested to rigorous Agilent specifications, under a quality system registered to ISO 9001. Why risk compromising your analytical results with anything less than genuine Agilent supplies?
When choosing your columns, Agilent J&W GC columns offer the lowest bleed levels, the best inertness for acids/bases/mixed functional compounds, and the tightest column-to-column reproducibility.
For Agilent’s complete listing of columns and supplies, visit www.agilent.com/chem/gc
DE44148.5798263889
This information is subject to change without notice.
© Agilent Technologies, Inc. 2021 Printed in the USA, January 2, 2021 5990-8916EN
Loading...