Page 1
Signal Analyzers
24.23
• Superb performance from 100 Hz to 40 GHz
• Automated, reconfigurable systems
• HP 8566B code compatibility
HP 71209A
HP 70000 Series Spectrum Analyzers 12
The HP 70000 series spectrum analyzers are par t of the growing modular measurement system (MMS) family at HP. Four factory-configured
spectrum analyzers combine high performance, ease of use and the
benefits of modularity for RF and microwave applications:
• HP 71100C/P RF spectrum analyzer, 100 Hz to 2.9 GHz
• HP 71200C/P microwave spectrum analyzer, 50 kHz to 22 GHz
• HP 71209A/P microwave spectrum analyzer, 100 Hz to 26.5 GHz,
with an outstanding set of performance features
• HP 71210C/P microwave spectrum analyzer, 100 Hz to 22 GHz,
with ultimate sensitivity and a dynamic tracking preselector
New “P” Series Feature PC Display
The “P” series spectrum analyzer systems replace the mainframe display with a high performance HP Vectra PC and the display software.
The key features of the “P” systems are capability for output to PC print-
ers and mass storage devices and lower system price. While performing
measurements, you can copy the virtual screen and cut and paste data
to spreadsheets or reports. Test data can be logged and stored in a data
file limited in size only by the computer’s disk capacity.
All A/C spectrum analyzers feature a color display with color editor, a custom hardkey panel with the most commonly-used spectrumanalyzer functions, downloadable programming capability and a memory car d reader.
HP 71209A/P Microwave Spectrum Analyzer
The HP 71209A/P is the MMS standard for microwave spectrum analysis, offering exceptional per formance for a lower price. Special features
include a built-in mixer interface for completely preselected coverage
from 100 Hz to 75 GHz (using HP 11974 series mixers), programming
code compatibility with the HP 8566B spectrum analyzer, similar performance to that of the HP 71210C/P, an IF output with AGC, a 5 dB step
attenuator and a built-in baseband limiter. Option 001 includes a preselector bypass and increases the front-end bandwidth to aid upgrading to
the bandwidth receiver system.
HP 70875A Noise-Figure Measurement Personality
The HP 70875A noise-figure measurement personality customizes
HP 70000 series spectrum analyzers for displayed swept noise-figure
and gain measurements from 10 MHz to 26.5 GHz. Features include
one-point measurement capability for quick results, noise-figure and
spectrum analyzer mode switching for stray signal detection, selectable
measurement bandwidths to directly measure narrowband devices and
marker functions with limit lines.
Key Literature
A complete list of all MMS products with full descriptions, specifications
and services is available. For a free copy of the HP 70000 Modular
Measurement System catalog, contact the HP Call Center in your region.
Ask for HP p/n 5965-2818E.
Ordering Information
HP 71100C Spectrum Analyzer, 100 Hz to 2.9 GHz
HP 71100P Spectrum Analyzer
HP 71200C Spectrum Analyzer, 50 kHz to 22 GHz
HP 71200P Spectrum Analyzer
HP 71209A Spectrum Analyzer, 100 Hz to 26.5 GHz
Opt 001 Wide Bandwidth RF Section
Opt Z40 Spectrum Analyzer, 100 Hz to 40 GHz
HP 71209P Spectrum Analyzer
259HP 70000 Series Spectrum Analyzers
HP 71100C
HP 71100P
HP 71200C
HP 71200P
HP 71209A
HP 71209P
HP 71210C
HP 71210P
5
HP 70000 Series Spectrum Analyzer Specification Summary
HP 71100C HP 71200C HP 71209A HP 71210C
HP 71100P HP 71200P HP 71209P HP 71210P
Frequency range 100 Hz to 2.9 GHz 50 kHz to 22 GHz 100 Hz to 26.5 GHz 100 Hz to22 GHz
(tunable in 1 Hz increments) (dc-coupled); (100 Hz to 40 GHz
With external mixers 75 GHz with HP 11974 preselected mixers; 110 GHz with HP 11970 harmonic mixers; 325 GHz with other mixers
Resolution bandwidth range 10 Hz to 300 kHz; 3 MHz option 10 Hz to 3 MHz
Phase noise –108 dBc/Hz at 10 kHz offset –108 dBc/Hz at 10 kHz offset, to 6.2 GHz
Optimum dynamic range 82 dB/92 dB 70 dB/88 dB 99 dB/96 dB 96 dB/98 dB
(2nd/3rd order)
Amplitude accuracy (relative
frequency + lesser of scale ± 2 dB ± 2 dB ± 2 dB ± 2.5 dB
fidelity or IF gain accuracy) (± 0.9 dB)
Displayed average noise level,
10 Hz RBW
at 2.9 GHz –131 dBm <–129 dBm –136 dBm –139 dBm
at 22 GHz — <–116 dBm –128 dBm –133 dBm
at 26.5 GHz — <–115 dBm –126 dBm —
Displayed average noise level
with HP 70620 Series preamplifiers
at 2.9 GHz –156 dBm –140 dBm –155 dBm –155 dBm
at 22 GHz — –119 dBm –148 dBm –150 dBm
at 26.5 GHz — –155 dBm –145 dBm —
1
± 0.9 dB transfer accuracy using the HP 70100A–H01 modular power meter.
Internet URL www.hp.com/go/tmc99 Product & Order Info See inside back cover
100 kHz to 2.9 GHz Option Z40)
(ac-coupled)
1
(± 0.9 dB)
1
(± 0.9 dB)
1
(± 0.9 dB)
1
Loading...