This series of linear-regulated
40-50 W dc power supplies is
designed to maximize the
throughput of DUTs through the
manufacturing test process with
fast programming and measurement,
and also active downprogramming.
It offers many advanced programmable features including stored
states and status reporting. Programming is done using industry
standard SCPI commands via the
GPIB or RS-232. Test system
integration is further simplified by
using the VXIPlug&Play drivers.
The optional relays simplify system
design and troubleshooting.
The half-rack size of the 6610A
series makes it a convenient
dc power supply for the R&D lab
bench. The built-in microamp
measurement system helps the
engineer to easily and accurately
monitor the output voltage and
current without a complicated
test setup.
Agilent Performance dc Power Supplies speed and accuracy for test optimization
Power Products Catalog 2002-2003
For more detailed specifications see the product manual at
www.agilent.com/find/power
25
Increase production throughput with fast programming speed
and fast downprogramming time
Protect valuable prototypes with fast protection features
Accurate and fast built-in measurement system
6611C - 6614C
Single-Output: 40-50 W GPIB
Specifications
(at 0˚to 55˚C unless
otherwise specified)
6611C 6612C 6613C 6614C 6611C-
J05
Special Order
Option
Number of outputs 11111
GPIB Yes Yes Yes Yes Yes
Output Ratings
Voltage 0 to 8 V 0 to 20 V 0 to 50 V 0 to 100 V 0 to 10 V
Current 0 to 5 A 0 to 2 A 0 to 1 A 0 to 0.5 A 0 to 5 A
Programming accuracy(at 25°C ±5°C)
Voltage 5 m V 10 m V 20 m V 50 m V 5 m V
+Current 0.05% + 2 m A 1 m A 0.75 m A 0.5 m A 2 m A
Ripple and noise 20 Hz to 20 MHz, with outputs
ungrounded or with either terminal grounded
Voltage rms 0.5 mV 0.5 mV 0.5 mV 0.5 mV 0.5 mV
peak -to-peak 3 mV 3 mV 4 mV 5 mV 3 mV
Normal mode rms 2 mA 1 mA 1 mA 1 mA 2 mA
dc measurement accuracyvia GPIB or front-panel
meters respect to actual outputat 25°C ±5°C
Voltage 0.03% + 2 mV 3 mV 6 mV 12 mV 2 mV
Low current range -20 mA to + 20 mA 0.1% + 2.5 µA 2.5 µA 2.5 µA 2.5 µA 2.5 µA
High current range +20 mA to + rated 1 0.2% + 0.5 mA 0.25 mA 0.2 mA 0.1 mA 0.5 mA
-20 mA to - rated 1 0.2% + 1.1 mA 0.85 mA 0.8 mA 0.7 mA 1.1 mA
Load regulation
Voltage 2 mV 2 mV 4 mV 5 mV 2 mV
Current 1 mA 0.5 mA 0.5 mA 0.5 mA 1 mA
Line regulation
Voltage 0.5 mV 0.5 mV 1 mV 1 mV 0.5 mV
Current 0.5 mA 0.5 mA 0.25 mA 0.25 mA 0.5 mA
Transient response timeLess than 100 µs for the output to recover to its previous level (within 0.1% of the voltage
rating of the supply or 20 mV, whichever is greater) following any step change in load current of up to 50% of the
output current rating of the supply
Supplemental Characteristics (Non-warranted characteristics determined by design and
useful in applying the product)
Average programming resolution
Voltage 2 mV 5 mV 12.5 mV 25 mV 3 mV
Current 1.25 mA 0.5 mA 0.25 mA 0.125 mA 1.25 mA
Sink current 3 A 1.2 A 0.6 A 0.3 A 3 A
26
Supplemental Characteristics
for all model numbers
dc Floating Voltage: Output terminals
can be floated up to ±240 Vdc
maximum from chassis ground
Remote Sensing: Up to two volts dropped
in each load lead. Add 2 mV to the
voltage load regulation specification
for each one volt change in the postive
output lead due to load current change.
Command Processing Time: Average time
required for the output voltage to begin
to change following receipt of digital date
is 4 ms for the power supplies connected
directly to the GPIB.
Output Programming Response Time: The
rise and fall time (10/90% and 90/10%)
of the output voltage is less than 2 ms.
The output voltage change settles within
1 LSB (0.025% x rated voltage) of final
value in less than 6 ms.
GPIB Interface Capabilities: IEEE-488.2,
SCPI command set, and 6630A Series
programming compatability
Input Power: (full load): 1.6 A, 100 W
(6611C: 2.2 A, 120 W)
Regulatory Compliance: Complies with
EMC directive 89/336/EEC (ISM 1B).
Warranty Period: Three years
Size: 212.8 mm W x 88.1 mm H x
368.3 mm D (8.4 in x 3.5 in x 14.5 in)
See page 102 for more details
Weight: 8.2 kg (18.16 lb) net;
10.6 kg (23.5 lb) shipping
Single-Output: 40-50 W GPIB (Continued)
Power Products Catalog 2002-2003
For more detailed specifications see the product manual at
www.agilent.com/find/power
Agilent Performance dc Power Supplies speed and accuracy for test optimization
Ordering Information
Opt 100 87 to 106 Vac, 47 to 63 Hz
Opt 120 104 to 127 Vac, 47 to 63 Hz
Opt 220 191 to 233 Vac, 47 to 63 Hz
Opt 230 207 to 253 Vac, 47 to 63 Hz
Opt 760 Isolation and Reversal relays
* Opt ICM Rack-mount Kit
(p/n 5063-9240)
* Opt AXS Rack-mount Kit
side-by-side mounting of two units,
Lock-link Kit p/n 5061-9694;
Flange Kit p/n 5062-3974
Opt 0L2 Additional standard
documentation package
Opt 0B3 Service Manual
*Support rails required
Accessories
Rack-mount and slide for two
side-by-side units of different lengths
p/n 1494-0015, 5063-9255 and filler
panel 5002-3999
Rack-mount slide and support for one
instrument p/n 1494-0015, 5063-9255
and filler panel 5002-3999
E3663AC Support rails for Agilent rack
cabinets
Loading...