Power Supplies
Single-Output Autoranging: 200 W to 1000 W
Above:HP 6023A, HP 6028A
Below:HP 6010A, 6011A, 6012A and 6015A
Abbreviated Specifications and Characteristics
System Autorangers (GPIB) HP 6030A HP 6031A HP 6032A HP 6033A HP 6035A HP 6038A
Autorangers (w/o GPIB) HP 6010A HP 6011A HP 6012B HP 6023A HP 6015A HP 6028A
Output ratings Voltage 0 to 200 V 0 to 20 V 0 to 60 V 0 to 20 V 0 to 500 V 0 to 60 V
Maximum power Watts 1,200 W 1,072 W 1,200 W 240 W 1,050 W 240 W
Autoranging output V1, P1 200 V, 5 A 20 V, 50 A 60 V, 17.5 A 20 V, 10 A 500 V, 2 A 60 V, 3.3 A
Programming accuracy Voltage 0.035% +145 mV 0.035% +15 mV 0.035% +40 mV 0.035% +9 mV 0.25% +400 mV 0.035% +40 mV
(at 25˚ C ±5˚ C) Current 0.2% +25 mA 0.25% +250 mA 0.2% +85 mA 0.15% +20 mA 0.3% +63 mA 0.09% +10 mA
System models only
Ripple and noise, Voltage rms 22 mV 8 mV 5 mV 3 mV 50 mV 3 mV
(20 Hz to 20 MHz) p-p 50 mV 50 mV 40 mV 30 mV 160 mV 30 mV
Readback accuracy Voltage 0.08% + 80 mV 0.08% +7 mV 0.08% +20 mV 0.07% +6 mV 0.5% +200 mV 0.07% +50 mV
(at 25˚ C ±5˚ C) Current 0.36% +15 mA 0.4% +100 mA 0.36% +35 mA 0.3% +25 mA 0.5% +50 mA 0.2% +11 mA
System models only
Load regulation Voltage 0.01%+ 5 mV 3 mV 5 mV 2 mV 40 mV 3 mV
Line regulation Voltage 0.01%+ 5 mV 2 mV 3 mV 1 mV 13 mV 2 mV
System models only Current 0.01%+ 5 mA 25 mA 10 mA 6 mA .03+17 mA 2 mA
Transient response time Time 2 ms 2 ms 2 ms 1 ms 5 ms 1 ms
10% step change Level 150 mV 100 mV 100 mV 50 mV 200 mV 75 mV
dc floating voltage (either terminal can be ±550 V ±240 V ±240 V ±240 V ±550 V ±240 V
grounded or floated from chassis ground)
ac input current 100 Vac (system only) 24 A 24 A 24 A 6.0 A 24 A 6.0 A
Weight Net 16.3 kg (36 lb) 17.2 kg (38 lb) 16.3 kg (36 lb) 9.6 kg (21 lb) 16.3 kg (36 lb) 9.6 kg (21 lb)
System Autorangers (GPIB) HP 6030A/ HP 6031A/ HP 6032A/ HP 6033A/ HP 6035A/ HP 6038A/
Autorangers (w/o GPIB) HP 6010A/ HP 6011A/ HP 6012B/ HP 6023A/ HP 6015A/ HP 6028A/
Current 0 to 17 A 0 to 120 A 0 to 50 A 0 to 30 A 0 to 5 A 0 to 10 A
V2, P2 120 V, 10 A 14 V, 76 A 40 V, 30 A 14 V, 17.2 A 350 V, 3 A 40 V, 6 A
V3, P3 60 V, 17 A 7 V, 120 A 20 V, 50 A 6.7 V, 30 A 200 V, 5 A 20 V, 10 A
Current rms 15 mA 120 mA 25 mA 30 mA 50 mA 5 mA
Current 0.01%+ 10 mA 15 mA 10 mA 9 mA .03+34 mA 5 mA
120 Vac 24 A 24 A 24 A 6.5 A 24 A 6.5 A
220 Vac 15 A 15 A 15 A 3.8 A 15 A 3.8 A
240 Vac 14 A 14 A 14 A 3.6 A 14 A 3.6 A
Shipping 21.7 kg (48 lb) 22.7 kg (50 lb) 21.8 kg (48 lb) 11.4 kg (25 lb) 21.7 kg (48 lb) 11.4 kg (25 lb)
Above:HP 6033A and HP 6031A(Option 001 on right)
Below:HP 6030A, 6031A, 6032A, and 6035A,
175
HP 6010A
HP 6011A
HP 6012A
HP 6015A
HP 6023A
HP 6028A
HP 6030A
HP 6031A
HP 6032A
HP 6033A
HP 6035A
HP 6038A
4
Remote Sensing: Up to 2 V drop in each lead. Voltage regulation
degrades for greater than 0.5 V drop.
Regulatory Compliance: Listed to UL-1244; certified to CSA 556B;
complies with EN 61010-1, carries the CE mark
RFI Suppression: Complies with CISPR-11, Group 1, Class A
Inductive Load: HP 6023A, 6028A are stable in CC mode for loads up to
1 H. HP 6010A–6012B, 6015A are stable in CC mode for loads up to100 mH.
Size:
HP 6030A–32A, 6035A: 425.5 mm W x 132.6 mm H x 503.7 mm D
(16.75 in x 5.25 in x 19.83 in).
HP 6033A, 6038A, 6023A, 6028A: 212.3 mm W x 177.0 mm H x 516.4 mm D
(8.36 in x 6.97 in x 17.87 in).
HP 6010A–12B, 6015A: 425.5 mm W x 132.6 mm H x 516.4 mm D
(16.75 in x 5.25 in x 20.33 in).
Key Literature
1999/00 HP Power ProductsCatalog, p/n 5968-2199
For more information, visit our web site:
http://www.hp.com/go/autorangingPS
Ordering Information
Standard: 104 to 127 VAC, 48 to 63 Hz
Opt 001 Front panel has only line switch, line indicator,
and OVP adjust (HP 6030A–33A and 6038A only)
Opt 002 Provides extra programming and monitoring
capabilities (HP 6010A–12B, 6023A, 6028A only)
Opt 100 87 to 106 Vac, 48 to 63 Hz (power supply output
is derated to 75%) HP 6030A–33A, 6035A, 6038A only
Opt 220 191 to 233 Vac, 48 to 63 Hz
Opt 240 209 to 250 Vac, 48 to 63 Hz
Opt 800 Rackmount Kit for Two Half-rack Units
Side by Side. HP p/n 5061-9694 and 5062-3978
Opt 908 Rackmount Kit for a Single Half-rack Unit
HP Models 6023A, 6028A, 6033A and 6038A
(with blank filler panel); HP p/n 5062-3960
HP Models 6010A–12B, 6015A, 6030A–32A
and 6035A; HP p/n 5062-3977
Opt 909 Rackmount Kit with Handles. For HP 6010A–12B,
6015A, 6030A–32A, 6035A; HP p/n 5062-3983
Opt 910 Service Manual and extra Operating Guide
For HP Models 6010A–12B, 6015A, 6023A, 6028A
For HP Models 6030A–33A, 6035A, 6038A
A line cord option must be specified for HP 6010A–12B,
6015A, 6030A–32A, 6035A. See page 180 for ordering
information.
Accessories
HP 5080-2148 Serial Link Cable, 2 m (6.6 ft) for HP 6030A,
6031A, 6032A, 6033A, 6035A, and 6038A
HP 1494-0060 Rack Slide Kit
Loading...