STANDARD HP’3577A I HP 35677,A/$ INTERCONNECT
-
.-a
4,Z.I
i (,
fhe standard -hp.3577A /-hp35677,Q
Kit(-hw part number 50610~~99! th&ertical Lock LinksI-h&part nuhber 1600-0367) and
the RF Cables (7hp- part number 8120~1387) shown are provided with the 3WiAIB as acc2wxies. It is imporrant to connect all these together when p&forming tests or adjustments.
as ground LOOPS and planer are critical to thg measureme~nts made and specifications.
interconnectioti
is,ihown above. The Lock Foot
COPYRIGHT AND DISCLAIMER NOTICE
Copyright - Agilent Technologies, Inc. Reproduced with the permission of Agilent
Technologies Inc. Agilent Technologies, Inc. makes no warranty of any kind with regard
to this material including, but not limited to, the implied warranties of merchantability
and fitness for a particular purpose. Agilent Technologies, Inc. is not liable for errors
contained herein or for incidental or consequential damages in connection with the
furnishing, performance, or use of this material or data.
12/'13/1996 87:54
Mode
made, forward or reverse. the Test
ward mode, the signal incident on the Inpu,t Port is
launched from Test Pert 1. 1~ the reverse mode, the
Eigln;ll incident on the input Port is launched from Test
Port 2.
to the Test Set,
495-736-3368
OC PLC
MIlElET THIE 356177AIB S-PAR.AMETE
.--.
IndlcaFor
The mode is cl3ntrolled by the 3V7A connected
The mode indicator dlsolays which
Set
is in. In the for-
TIk PMEL.
PAGE 0s
it dependent on the test mode (for
in the forward mode, this signa
into the Test Port 1 con
I
Test Port I The device wrier test
is connected djrectiy ts3. or tlrrough
special adapters and fixture:;, t‘o this
port. If rhe device under test Ias *NO
pnrts. then the other port may be
connected toTest Port 2 decending
on the tests performed.
--.-
3577 lntcrcor
connected to
Cable (-hp. pa
connection. :hl
made. and se,
S-Parameter
-r
Loading...