This manual is designed to assist you in using your new digital camera. All information presented
is as accurate as possible but is subject to change without notice.
Windows 98/2000/ME/XP are registered trademarks of Microsoft Corporation in the United
States and/or other countries. Windows is an abbreviated term referring to the Microsoft
Windows Operation System. YouTube is a brand of Google, Inc. and YouTube, LLC, Mountain View,
California, US. All other companies or product names are trademarks or registered trademarks of
their respective companies.
Safety and Handling Precautions
Camera Information
• Do not take apart or attempt to service the camera yourself.
• Do not expose the camera to moisture, or extreme temperatures.
• Allow the camera to warm up when moving from cold to warm temperatures.
• Do not touch the camera lens.
• Do not expose the lens to direct sunlight for extended periods.
• Do not use abrasive chemicals, cleaning solvents or strong detergents to clean the product.
Bat
Wipe the product with a slightly damp soft cloth.
tery
Information
• Turn off the camera before installing or removing the rechargeable battery.
• Use only the provided batteries or type of battery and charger that came with your camera.
Using other types of battery or charger may damage the equipment and invalidate the
warranty.
• When the camera is used for an extended period of time, it is normal for the camera body
to feel warm.
iv
5
• Download
all pictures and remove the battery from the camera if
you are going
to
store the
camera for a long period of time.
• The type of battery and the battery power level may cause the lens to be stuck up. Ensure
you use the correct battery type and use a fully charged battery.
• Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
Using this Menu
Symbols used in this manual are explained below:
Note
This indicates useful information when using your camera.
Warning
This indicates warning message that should be read before using the function.
Introduction
Congratulations on the purchase of your AgfaPhoto new digital camera. This manual provides
step-by-step instructions on how to use your camera, and is intended for your reference only.
System Requirements
In order to get the most out of your camera, your computer must meet the following system
requirements:
For Windows:
• Windows 2000/XP/Vista
• Processor: Pentium II 450MHz or above
• Memory: 512MB or above
• HDD space: 200 MB or above
• 16bit color display monitor
• Microsoft DirectX 9.0C
• USB port and CD-ROM drive
For Macintosh:
• Power Mac G3 or later
• Mac OS 10.0-10.4
• Memory: 64MB or above
• HDD space: 110MB or above
• USB port and CD-ROM drive
Main Features
• 12 mega pixels resolution
• Up to 3x optical zoom and 5x digital zoom
• 1/2.3 inch CCD image sensor
• 3.0 inch color LCD monitor
• 32MB internal flash memory with optional external SD/SDHC card
• Supports up to 4GB of SD card, and up to 32GB of SDHC card
• Sleek metallic finish
• Easy-to-use button interface
• DCF, DPOF, PictBridge compatibility
1
• S
lideshow
featur
e to review
yo
ur pictu
res
and movies
• A/V output to view your pictures and movies on your TV
• USB port to transfer photos and movies to your PC
Package Contents
Please check the contents of your camera package. It should contain:
OPTIMA 102 Rechargeable
battery
Battery charger
(optional)
Wrist strap USB cable AV cable (optional)
CD-ROM Quick Start Guide/
User Manual (optional)
2
Camera pouch (optional)
Camera Views
Front View
Back View
LCD screen
Flash
Self-timer LED / AF
Assist Lamp
Zoom Lens
Microphone
Indicador LED
Mode switch
M
SET
DISP
Fn
Menu buttons
SET button / 4-way
navigation control
Function / Delete button
3
Top V ie w
Shutter button
Bottom View
Battery / SD card
compartment
Left/Right View
Power button
Stabilizer button
Zoom
USB / TV out
Tripod scre w h o l e
Strap ring
4
Camera Buttons
Your camera is equipped with different buttons for ease of use.
ButtonDescription
PowerPress to turn on/off the power.
StabilizerThe stabilizer sets the optimal ISO value according to light levels to compensate for
camera shake.
Press to set stabilizer on/off.
ShutterPress to capture an image or start/stop recording video or audio clip.
PlayIf the camera is turned off, press and hold to turn on camera in Playback mode.
If the camera is turned on, press to toggle camera to Playback or Record mode.
ZoomSlide the zoom control to change zoom focus.
MenuPress to enter menu.
Function/
Delete
In Record mode, press to enter function menu.
In Playback mode, press to delete an image, video or audio clip.
Navigation Control
The 4-way Navigation Control and the SET button allows you to access the various menus
available from the On Screen Display (OSD). You can configure a wide range of settings to
ensure maximum results from your photos and videos. Further functions of these buttons are as
follows:
5
Face Tracking/
Rotate Button
Focus Button
ButtonUsage
SET
DISP
SET Button
Flash Button
Display Button
SET1. Confirm a selection when using the OSD menus.
1. In Record mode, press to scroll through the flash mode options. (Auto, Anti
Red-eye, Fill, Slow Sync and Off)
Flash/ Right
2. In Playback mode, press to view the next image, video or audio clip.
3. In Playback Video mode, press to fast forward video playback
4. In Menu, press to enter the submenu or to navigate through the menu
selections.
1. In Record mode, press to scroll through the focus mode options. (Macro, Pan
Focus, Infinite, Normal)
Macro/ Left
2. In Playback mode, press to view the previous image, video or audio clip.
3. In Playback Video mode, press to retract video playback
4. In Menu, press to exit a submenu or to navigate through the menu
selections.
1. In Menu, press to navigate through the menu and submenu selections.
Up/Face
Tracking/
Rotate
2. In Record mode, press to turn the face tracking function on and off.
3. In Playback Video/ Audio mode, press to Start/Pause video or audio
playback.
4. In Playback photo mode, press to rotate the image clockwise 90 degrees by
each press of the button. This feature is applicable for still images only.
6
ButtonUsage
1. In Photo, Movie, and Playback mode, press to change the LCD screen
display to show or hide OSD icons or view Help.
Display/Down/
Help
2. In Record mode, press to change LCD screen display to show or hide OSD
icons and guide lines or help.
3. In Menu, press to navigate through the menu and submenu selections.
4. In Playback Video/ Audio mode, press to stop video/audio playback.
Camera Memory
Internal memory
Your camera is equipped with 32MB of internal memory. If there is no memory card inserted in
the memory card slot, all images, videos and audio clips recorded are automatically stored in the
internal memory.
External storage
Your camera supports SD cards of up to 4GB in size. It also supports SDHC cards with a
maximum capacity of 32GB. If there is a storage card inserted in the memory slot, the camera
automatically saves all images, videos and audio clips in the external storage card. The
icon indicates the camera is using SD card.
Warning
Not all cards may be compatible with your camera. When purchasing a card,
please check the card's specifications and take the camera with you.
7
Getting Started
Attaching the Wrist Strap
Follow these instructions to attach the wrist strap to your
camera to facilitate easy carrying:
1. Insert the short loop of the strap in the strap eyelet.
2. Thread the larger loop of the strap though the short loop
and pull tight to attach the strap to the camera.
Inserting the Battery
Follow these instructions to insert the battery into the battery compartment. Please read
"Battery Information” on page iv before inserting/removing the battery.
1. Make sure the power is off before inserting the battery.
2. Open the battery compartment at
the bottom of the camera.
3. Insert the battery into the compartment with the terminal
facing inside the camera.
8
4. Close the battery compartment.
Inserting an SD/SDHC Memory Card
Expand your camera’s storage by using SD or SDHC
memory cards.
1. Open the SD card compartment at the bottom of
the camera.
2. Insert the SD/SDHC card into the memory card
slot with the metallic part facing the front side of
the camera.
3. Push the SD/SDHC card into the memory slot until
it clicks into place.
4. Close the SD card compartment.
To remove the SD/SDHC card
1. Open the battery compartment.
2. Gently push the card until it pops out.
3. Pull out the card carefully.
LOCK
9
Charging the Battery
CHARGE
The battery that comes along with your package is not charged.
You need to charge the battery before using the camera.
1. Insert the battery into the battery charger as shown.
2. Connect the battery charger to the adaptor.
3. Plug the adaptor to the main outlet.
The battery charging time is 2 hours.
Turning the Power On and Off
There are two ways to turn on the camera:
• The start up image displays briefly and the startup sound plays if enabled. The zoom lens
extends and the camera is turned on in Record mode.
• The camera is turned on in Playback mode. The zoom lens are not extended.
To turn off the camera, press the Power button.
See "Modes” on page 11 to know more about Record and Playback mode.
Initial Settings
When you turn on your camera for the first time, you will be asked to do the initial settings of
your camera.
When you turn the Power button on, the Language Menu is displayed on the LCD screen for you
to setup the display language.
Setting the Language
1. Press , , or to move through the selection.
2. Select a language, then press SET to apply.
10
Setting the Date & Time
1. Press or to move through the selection.
2. Press
3. Press SET to apply.
4. If necessary, press to close the menu.
Now, you are ready to start taking photos and videos.
Note
the or keys to change the value for the date and time.
M
Holding down the or keys to change the values continuously.
Modes
Your camera has three modes:
Photo Record mode
• Set to Photo Record mode to capture images and record audio clips.
• Record mode can be further set to mode options like auto, movie and scene selection
modes. See "Selecting the Photo Record mode options" below.
Movie Record mode
• Set to Movie Record mode to record videos.
Playback mode
• Set your camera to Playback mode to view and edit captured images and playback videos
and audio clips. You can also attach voice memo to images in this mode.
When you turn on your camera using the Power button, you are automatically turned on to
Record mode.
Switching Between Modes
Adjust the Mode switch to switch among Photo Record, Video Record, and Playback mode.
11
Selecting the Photo Record mode options
Maximize the quality and ease of use of your camera by using the different mode options. The
mode options allow you to capture images with preset settings according to scene conditions.
1. Set the camera to Photo Record mode.
2. Press to launch Record Mode Menu.
3. Select Record Mode, then press to enter
4. Select a mode.
5. Press the SET button to apply selected mode.
Note
M
submenu.
• For more information, see "Using the Record Menu” on page 32
Record Mode
Drive Mode
AEB
AF Area
AF Lamp
Sharpness
.
• Use the 4-way navigation control to move through the menu selections.
OFF
OFF
12
Using the LCD Monitor
12M
307
AUTO
F 3.0
1/ 30
0.0EV
0
2
3
The high resolution 3.0” LCD monitor shows all important information regarding camera settings
as well as the visual image of your photo or video. The display on the LCD monitor is called the
On Screen Display or OSD.
LCD Monitor Layout
The following illustrations show the LCD monitor layout and icon descriptions.
Record Mode Screen Layout
12345
307
307
27
12M
26
25
24
23
22
21
0.0EV
F 3.0
F 3.01/ 30
1/ 300.0EV
ISO
1416191518 1720
No.ItemDescription
6
7
8
9
1
11
1
1
AUTO
1Record ModeIndicates the current mode.
2FlashIndicates flash settings.
3Self-timer / BurstIndicates drive mode settings.
4Zoom indicatorDisplays zoom.
13
No.ItemDescription
5Shots remainingIndicates the remaining shots available.
6BatteryIndicates battery level.
7Storage mediaIndicates current storage media in use.
8Date stampIndicates date stamp is enabled.
9AEBIndicates AEB function is enabled
10StabilizerIndicates stabilizer function is enabled.
11SaturationDisplays saturation settings.
12ContrastDisplays contrast settings.
13HistogramGraphic display of light level for the current image.
14ISODisplays ISO settings.
15Focus areaUse to frame subject to capture.
16Shutter speedDisplays shutter speed settings.
17Aperture valueDisplays aperture settings.
18Shake warningIndicates that the camera is shaking.
19MacroIndicates macro is enabled.
20ExposureDisplays exposure settings.
21Face trackingIndicates face tracking is enabled.
14
No.ItemDescription
22White balanceDisplays white balance settings.
23MeteringDisplays metering settings.
24SharpnessDisplays sharpness settings.
25QualityDisplays quality settings.
26ResolutionDisplays resolution settings.
27AF lampIndicates AF lamp is enabled.
15
Playback Mode Screen Layout
12M
F 3.0
1/ 30
0EV
27/27
SET
2009/01/01 01:57
400
6
7
8
The Playback mode display varies depending on the type of image being viewed.
Playback mode display of still images:
1 23 45
27/27
27/27
:
12M
10
9
No.ItemDescription
Playback modeIndicates playback mode.
1
ProtectIndicates file is protected.
2
Voice memoIndicates voice memo is attached.
3
SET
ISO
400
0EV
2009/01/01 01:57
2009/01/01 01:57
F 3.0
F 3.0
1/ 30
1/ 300EV
4
Button intro
Indicates the button to press on the camera to play a movie
or audio file.
Indicates the file number over the total number of files in the
File no. / Total no.
5
BatteryIndicates battery level.
6
storage card.
16
No.ItemDescription
27/27
2009/01/01 01:57
SET
0:00:16 / 0:00:20
9
Storage mediaIndicates used storage memory.
7
10
Recording
8
information
DPOFIndicates the file is marked for printing.
9
ResolutionDisplays the resolution settings.
Displays recording information of the file.
Playback mode of videos:
1 235
No.ItemDescription
Playback modeIndicates playback mode.
1
4
:
SET
2009/01/01 01:57
2009/01/01 01:57
27/27
27/27
6
7
8
0:00:16 / 0:00:20
1112
WT
10
ProtectIndicates file is protected.
2
Movie clipIndicates the file is a movie.
3
17
No.ItemDescription
10
11
12
Button intro
4
File no. / Total no.
5
BatteryIndicates battery level.
6
Storage mediaIndicates used storage memory.
7
Recording informationDisplays recording information of the file.
8
Vol umeIndicates volume settings.
9
Key indicator
Played timeIndicates played time.
Playing statusDisplays playing status.
Indicates the button to press on the camera to play a movie
or audio file.
Indicates the file number over the total number of files in the
storage card.
Indicates the buttons to press on the camera to apply the
functions.
18
Playback mode of audio clips:
27/27
2009/01/01 01:57
SET
0:00:16 / 0:00:20
8
1 24
3
:
SET
2009/01/01 01:57
2009/01/01 01:57
27/27
27/27
5
6
7
0:00:16 / 0:00:20
1011
WT
No.ItemDescription
Playback modeIndicates playback mode.
1
ProtectIndicates the file is protected.
2
Button intro
3
File no. / Total no.
4
BatteryIndicates battery level.
5
Indicates the button to press on the camera to play a
movie or audio file.
Indicates the file number over the total number of files in
the storage card.
9
Storage mediaIndicates used storage memory.
6
Recording informationDisplays recording information of the file.
7
VolumeIndicates volume settings.
8
19
No.ItemDescription
Indicates the buttons to press on the camera to apply the
functions.
10
11
Key indicator
9
Played timeIndicates played time.
Playing statusDisplays playing status.
Changing the LCD Monitor Display
The type of information displayed on the LCD screen can be changed using the button.
Press the button repeatedly to change the LCD display from one type to another.
In Photo / Video Record Mode, the LCD display can be changed into any of the following:
•OSD on
•Full OSD on
• Guide lines on
•OSD off
•Help
Note
• The OSD information may vary depending on the record mode type.
• The following icons, if enabled, are still displayed on the LCD even when OSD
off or Guide lines on: AEB, Face tracking, AF lamp, Drive mode, and Macro.
• Use the “Guide lines” to properly set image for capture.
20
In Playback mode, the LCD display can be changed into any of the following:
•Full OSD on
•OSD off
•Help
Note
LCD display cannot be changed in the following situations:
• Manual exposure mode
• Recording movie or audio clips
• Playing movie or audio clips
• Playing slideshow
21
Recording Photos, Videos and Voices
307
AUTO
0.0EV
12M
AUTO
F 3.0
1/ 30
Taking Photos
Now that you are familiar with your camera, you are now ready to take your photos.
Taking photos with your camera is very simple.
1. Turn on the camera by pressing the Power button.
2. Adjust the switch mode to Photo Record.
3. Frame the shot using the focus bracket on the LCD
monitor. See illustration on the right.
4. Half press the Shutter button. The camera
automatically adjusts the focus and exposure. When
the camera is ready to take the photo, the frame
bracket turns green, the shutter speed and aperture
value are displayed.
5. Fully press the Shutter button to capture image.
When the shake warning icon appears, hold the
camera steadily, with your arms at your side or use a tripod
to stabilize the camera to prevent blurred images.
12M
0.0EV
0.0EV
ISO
307
307
AUTO
Using the Stabilizer
The Stabilizer function prevents blurred images caused by
shaking.
Stabilizer button
22
F 3.0
F 3.01/ 30
1/ 30
ISO
AUTO
To activate Stabilizer
307
12M
307
•Press the Stabilizer button on top of
your camera to enable/disable stabilizer.
If Stabilizer is enabled, the stabilizer icon is
displayed on the LCD monitor and the ISO
12M
307
Stabilizer
on
setting is automatically set to Auto. See “ISO”
on page 30 for more details.
Setting the Zoom Control
Your camera features up to 3x optical zoom and up to 5x of digital zoom. Optical zoom is
achieved by mechanically adjusting the lens. While digital zoom is activated through the menu
settings. Please refer to “Setting the Digital Zoom” on page 48 on how to setup digital zoom.
To adjusts the optical zoom:
1. Press the Zoom buttons to zoom in or zoom out an image.
2. The zoom indicator appears on the LCD monitor.
Zoom control
Slide right to zoom in.Slide left to zoom out.
To adjusts the digital zoom:
1. Activate digital zoom. See “Setting the Digital Zoom” on page 48.
2. Slide the zoom control right to optically zoom in an image to its maximum until it stops.
3. Release the zoom control.
23
Loading...
+ 68 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.