PARTS MANUAL
MODEL: G6070/G6070P
AgBag Silage Bagger
This parts manual is furnished for your convenience only. All parts must be purchased through an authorized dealer. Call us for a dealer near you.
P O Box 127
42.0901805A 511 East Main St.
St. Nazianz, WI 54232
(920) 773-2121 FAX: (920) 773-1200
Email: info@millerstn.com
www.ag-bag.com
Issue Date: 10/11
IMPORTANT!
For ongoing updates to this Parts Book Visit us on the web at: www.ag-bag.com
and click on PARTSMART web.
Check for new updates before placing any orders. Order parts through your local dealer.
Table of Contents
Section 1 - Frame, Rotor, Cable Drums, Tunnel Top, Tunnel Extensions & Bag Boom
1.01 |
Frame with Rotor & Cable Drums................................................................................................. |
6 |
1.01.1 Frame with Rotor & Cable Drums - G6070P............................................................................. |
8 |
|
1.02 Tunnel Top Interchangeable, Tunnel Extensions & Bag Cradle................................................... |
10 |
|
Section 2 - Wheels, Tires, Spindle & Hub Assembly |
|
|
2.01 |
Spindle & Hub Assembly - G6060, G6070 & G6070P................................................................ |
12 |
2.02 Wheels & Tires............................................................................................................................ |
14 |
|
Section 3 - Conveyor, Drive Assembly & Hopper Assembly |
|
|
3.01 |
Drive Assembly - Rotor............................................................................................................... |
16 |
3.02 Hopper Assembly....................................................................................................................... |
18 |
|
3.03 |
Split Conveyor - G6060, G6070 & G6070P (S/N 42.04939 & Before)........................................ |
20 |
3.04 |
Split Conveyor (S/N 42.04940 & After)....................................................................................... |
24 |
3.05 |
Lower Assembly, Split Conveyor - G6060, G6070 & G6070P (S/N 42.04940 & After)............... |
28 |
3.06 |
Single Conveyor.......................................................................................................................... |
30 |
3.07 |
Conveyor Support/Slide Assembly, Split & Single Conveyor...................................................... |
34 |
3.08 |
Conveyor Lift Assembly - Manual............................................................................................... |
36 |
3.09 |
Hydraulic Conveyor Lift Kit - G6060, G6070 & G6070P............................................................. |
38 |
Section 4 - Brake Assembly, Cable Guide Assembly, & Bag Boom |
|
|
4.01 |
Brake Assembly - G6070 & G6070P.......................................................................................... |
40 |
4.02 Cable/Guide Assembly............................................................................................................... |
42 |
|
4.03 |
Bag Boom................................................................................................................................... |
44 |
Section 5 - Backstop & Jackstand |
|
|
5.01 |
Backstop, Steel........................................................................................................................... |
46 |
5.02 |
Jack Stand - G6060, G6070 & G6070P...................................................................................... |
48 |
Section 6 - Transport Lights, Safety Signs & Decals |
|
|
6.01 Transport Lights & Light Stand - G6060, G6070 & G6070P....................................................... |
50 |
|
6.02 |
Safety Signs & Decals - G6060, G6070 & G6070P.................................................................... |
52 |
Section 7 - Gearbox |
|
|
7.01 |
Gearbox, Dual Output Aluminum................................................................................................ |
54 |
7.01.1 Gearbox, Dual Output Cast Iron.............................................................................................. |
56 |
|
Section 8 - PTO Driveline |
|
|
8.01 |
PTO Transport Kit - G6060 & G6070.......................................................................................... |
58 |
8.01.1 PTO Transport Assembly - G6070P......................................................................................... |
60 |
|
8.02 |
PTO Shaft - G6070 & (G6060 2009 Production & After)............................................................ |
62 |
8.02.1 PTO Shaft - G6070P................................................................................................................ |
64 |
|
G6070/G6070P |
- 3 - |
42.0901805A Issue Date: 10/11 |
Table of Contents (Continued) |
|
Section 9 - Hydraulics & Breather Assembly |
|
9.01 Hydraulic Drive Assembly - G6060 & G6070.............................................................................. |
66 |
9.02 Hydraulic Drive, PTO Shield Assembly - G6070......................................................................... |
70 |
9.03 Breather Assembly, Planetary - G6070P.................................................................................... |
72 |
Section 10 - Miscellaneous Items, Options & Kits |
|
10.01 Miscellaneous Items................................................................................................................. |
74 |
10.02 Safety Chain Kit........................................................................................................................ |
76 |
10.03 Gandy, 45 lb. Dry Inoculant Applicator...................................................................................... |
78 |
10.04 Hydraulic Lift Kit - G6060, G6070 & G6070P........................................................................... |
80 |
10.05 Gandy Option - G6060, G6070 & G6070P............................................................................... |
82 |
10.06 Option: Conveyor Liner............................................................................................................. |
84 |
Part Number Index......................................................................................... |
86 |
Part Description Index................................................................................... |
89 |
42.0901805A Issue Date: 10/11 |
- 4 - |
G6070/G6070P |
Table of Contents (continued)
This Page Intentionally Left Blank
G6070/G6070P |
- 5 - |
42.0901805A Issue Date: 10/11 |
Section 1
1.01 Frame with Rotor & Cable Drums
42.0901805A Issue Date: 10/11 |
- 6 - |
G6070/G6070P |
Section 1
1.01 Frame with Rotor & Cable Drums
Item |
Part No. |
Quantity |
Description |
1 |
42.0900413 |
1 |
Frame Weldment |
1a |
42.0000093 |
AR |
Stripper Plate - 45 in. Weld In (Non Gearbox End) |
1b |
42.0000094 |
AR |
Stripper Plate - 35 in. Weld In G6060 (Gearbox End) |
1c |
42.0000095 |
AR |
Stripper Plate - 33 in. Weld In (Gearbox End) |
2 |
42.0900372 |
1 |
Bearing, Drive, 3-7/16 in. Spherical 4 Bolt Footed |
3 |
42.0900371 |
1 |
Bearing, Drive, 2-15/16 in. 4 Bolt Footed - G6060 Only |
4 |
42.0900863 |
1 |
Rotor + Four Teeth & Caps - (Weld Req`d) |
4a |
42.0900380 |
1 |
Stub Shaft Drive, Weld In |
4b |
42.6002008 |
1 |
Stub Shaft Idle, 2-15/16 in. Weld In |
4c |
42.1020018 |
56 |
Tooth Assembly w/Cap |
4d |
42.1020001 |
56 |
Cap, Rotor Tooth, Weld On |
5 |
42.1510044 |
2 |
Bearing, 4 Bolt Flange |
6 |
42.0901808 |
1 |
Gearbox, Dual Output Aluminum |
|
42.0901809 |
1 |
Gearbox, Dual Output Cast Iron |
|
42.0901809R |
1 |
Gearbox, Dual Output Cast Iron Viton Rebuilt |
7 |
42.1510047 |
2 |
Bearing, Split Babbit |
8 |
42.0900246 |
2 |
Drum, Cable, w/Brake Flange, 7 Ft Rotor |
9 |
42.0900445 |
1 |
Weldment, Rotor Access, Drive - G6070 |
10 |
42.0900447 |
1 |
Weldment, Rotor Access, Idle |
11 |
904215 |
8 |
Bolt, Hex, 3/4-10 x 3-1/2 in. Gr 5 |
12 |
906349 |
8 |
Nut, Hex Lock, 3/4-10 Nylock |
13 |
900508 |
8 |
Washer, Lock, 5/8 in. Yellow Zinc |
14 |
904253 |
8 |
Bolt, Hex, 5/8-11 x 2 in. Gr 5 |
15 |
903518 |
8 |
Bolt, Hex, 1/2-13 x 1-3/4 in. Gr 5 |
16 |
906401 |
16 |
Nut, Hex Lock, 1/2-13 Nylock |
17 |
903306 |
8 |
Bolt, Hex, 1/2-13 x 1-1/2 in. Gr 5 |
18 |
903832 |
4 |
Bolt, Hex, 5/8-11 x 2-1/2 in. Gr 5 |
19 |
906402 |
4 |
Nut, Hex Lock, 5/8-11 Nylock |
20 |
42.6003021 |
1 |
Coupling, Cable Drum |
21 |
42.6003024 |
1 |
Cable Drum, Non Brake Side, 6 Ft Rotor - G6060 Only |
22 |
42.6003025 |
1 |
Cable Drum, Brake Side, 6 Ft Rotor - G6060 Only |
23 |
01.73266 |
2 |
Key, Square, 3/8 in. x 3 in. Undersize |
24 |
42.6011010 |
1 |
Hitch, Field, 10 Ft - G6070 & G6070P |
25 |
42.1501398 |
1 |
Jack, Manual, 15 in. Square Mount |
26 |
42.1550172 |
1 |
Pin, Hitch |
27 |
05.73120 |
1 |
Pin, Hair |
28 |
42.1501400 |
AR |
Mount, (Weld On), Jack, Female Square Tubing |
G6070/G6070P |
- 7 - |
42.0901805A Issue Date: 10/11 |
Section 1
1.01.1 Frame with Rotor & Cable Drums - G6070P
42.0901805A Issue Date: 10/11 |
- 8 - |
G6070/G6070P |
Section 1
1.01.1 Frame with Rotor & Cable Drums - G6070P
Item |
Part No. |
Quantity |
Description |
1 |
42.0900756 |
1 |
Frame Weldment |
1a |
42.1000027 |
AR |
Stripper Bar - 45 in. Weld In (Included In Item 1) |
1b |
42.1000001 |
AR |
Stripper Bar - 35 in. Weld In (Included In Item 1) |
2 |
16.0901679 |
1 |
Rotor + Four Teeth & Caps - G6070 Only (Weld Req`d) |
2a |
42.6002008 |
1 |
Stub Shaft Idle, 2-15/16 in. Weld In |
2b |
42.1020018 |
56 |
Tooth Assembly w/Cap |
2c |
42.1020001 |
56 |
Cap, Rotor Tooth, Weld On |
3 |
42.0900371 |
1 |
Bearing, Idle, 2-15/16 in. 4 Bolt Footed |
4 |
42.1510044 |
2 |
Bearing, 4 Bolt Flange |
5 |
42.1510047 |
2 |
Bearing, Split Babbit |
6 |
42.0900246 |
2 |
Drum, Cable, w/Brake Flange |
7 |
42.0900447 |
1 |
Weldment, Rotor Access, Idle |
8 |
904215 |
4 |
Bolt, Hex, 3/4-10 x 3-1/2 in. Gr 5 |
9 |
906349 |
3 |
Nut, Hex Lock, 3/4-10 Nylock |
10 |
903518 |
8 |
Bolt, Hex, 1/2-13 x 1-3/4 in. Gr 5 |
11 |
906401 |
17 |
Nut, Hex Lock, 1/2-13 Nylock |
12 |
903306 |
9 |
Bolt, Hex, 1/2-13 x 1-1/2 in. Gr 5 |
13 |
903832 |
4 |
Bolt, Hex, 5/8-11 x 2-1/2 in. Gr 5 |
14 |
906402 |
4 |
Nut, Hex Lock, 5/8-11 Nylock |
15 |
42.0900415 |
1 |
Planetary, RR3500, 23.2:1 ML 120RA |
16 |
42.0900775 |
1 |
Weldment, Rotor Access, Planetary |
17 |
907808 |
12 |
Bolt, Hex, M14-2 x 180mm Gr 10.9 |
18 |
907809 |
12 |
Nut, Hex Lock, M14-2 CLS 10 Nylock |
19 |
42.6003021 |
1 |
Coupling, Cable Drum |
G6070/G6070P |
- 9 - |
42.0901805A Issue Date: 10/11 |
Section 1
1.02 Tunnel Top Interchangeable, Tunnel Extensions &
Bag Cradle
42.0901805A Issue Date: 10/11 |
- 10 - |
G6070/G6070P |
Section 1
1.02 Tunnel Top Interchangeable, Tunnel Extensions &
Bag Cradle
Item |
Part No. |
Quantity |
Description |
1 |
42.0901791 |
1 |
Tunnel Hood, 8` w/Decals - G6060 Only |
|
42.0901792 |
1 |
Tunnel Hood, 9` w/DecalsG6060 Only |
|
42.6006074 |
1 |
Tunnel Hood, 9` - G6070 & G6070P Only |
|
42.6006075 |
1 |
Tunnel Hood, 10` - G6070 & G6070P Only |
2 |
42.6006087 |
Set |
Tunnel Extension Base, 29 in. - G6060, G6070 & G6070P Only |
|
42.6006086 |
Set |
Tunnel Extension Base, 18 in. - G6060, G6070 & G6070P Only |
2a |
42.6006113 |
1 |
Tunnel Extension Base, 29 in. - LH - G6060, G6070 & G6070P Only |
2b |
42.6006114 |
1 |
Tunnel Extension Base, 29 in. - RH - G6060, G6070 & G6070P Only |
2c |
42.6006077 |
1 |
Tunnel Extension, 8` x 29 in. - G6060 Only |
|
42.6006079 |
1 |
Tunnel Extension, 9` x 29 in. - G6060 Only |
|
42.6006081 |
1 |
Tunnel Extension, 10` x 29 in. - G6070 & G6070P Only |
|
42.6006085 |
1 |
Tunnel Extension, 9` x 29 in. - G6070 & G6070P Only |
3 |
907465 |
41 |
Washer, Flat, 3/8 in. Wide Stainless Steel |
4 |
907467 |
9 |
Bolt, Button Hd. 3/8-16 x 1 in. Stainless Steel |
5 |
907689 |
16 |
Bolt, Hex, 3/8-16 x 4 in. Stainless Steel |
6 |
907391 |
16 |
Nut, Hex Lock, 3/8-16 Nylock Stainless Steel |
7 |
42.6006012 |
1 |
Cradle, Bag Boom, 8` & 9` - G6060 & PB6000 Only |
|
42.6006089 |
1 |
Cradle, Bag Boom, 10` - G6070 & G6070P Only |
|
42.6006088 |
1 |
Cradle, Bag Boom, 9` - G6070 & G6070P Only |
8 |
906400 |
35 |
Nut, Hex Lock, 3/8-16 Nylock |
9 |
42.0900373 |
1 |
Bolt Bag, Tunnel Extension (Consists Of Items: 8, 16 & 17) |
10 |
42.0900562 |
1 |
Bolt Bag, Tunnel Hardware (Consists Of Items: 3 thru 6) |
11 |
42.1560004 |
1 |
Kit, Bungee Cord (Consists Of Items 11a & 11b) |
11a |
42.1560000 |
1 |
Bungee Cord, Tunnel |
11b |
42.1560001 |
2 |
Bungee Cord, Bag Pan |
12 |
42.6006037 |
1 |
Pan, Bag G6070 & G6070P Only |
|
42.6006005 |
1 |
Pan, Bag G6060 & PB6000 |
13 |
900498 |
2 |
Washer, Flat 5/8 in. |
14 |
903832 |
2 |
Bolt, Hex, 5/8-11 x 2-1/2 in. Gr 5 |
15 |
906402 |
2 |
Nut, Hex Lock, 5/8-11 Nylock |
16 |
907467 |
35 |
Bolt, Button Hd. 3/8-16 x 1 in. Stainless Steel |
17 |
907465 |
35 |
Washer, Flat, 3/8 in. Wide Stainless Steel |
G6070/G6070P |
- 11 - |
42.0901805A Issue Date: 10/11 |
Section 2
2.01 Spindle & Hub Assembly - G6060, G6070 & G6070P
42.0901805A Issue Date: 10/11 |
- 12 - |
G6070/G6070P |
Section 2
2.01 Spindle & Hub Assembly - G6060, G6070 & G6070P
Item |
Part No. |
Quantity |
Description |
1 |
42.1010034 |
1 |
Spindle, Single, 2-1/4 x 14-7/8 in. Std. |
2 |
901150 |
1 |
Cone, Roller Bearing, 1-5/8 in. |
3 |
902410 |
1 |
Cap, Dust |
4 |
42.0900375.8 |
1 |
Hub Assembly With Cups & Studs |
5 |
901151 |
1 |
Cup, Bearing, Inner |
6 |
901182 |
1 |
Cup, Bearing, Outer |
7 |
907757 |
6 |
Stud, Wheel, 9/16-18 x 2-1/8 in. |
8 |
42.1550228 |
1 |
Washer, Lock, External Tooth |
9 |
42.1500377 |
1 |
Oil Seal, 2.25 I.D. |
10 |
901181 |
1 |
Cone, Roller Bearing, 1-1/4 in. |
11 |
42.1550136 |
1 |
Nut, Slotted Lock, NO6 Zinc Plated |
12 |
905050 |
6 |
Lug Nut, 9/16-18 |
13 |
42.1150171 |
1 |
Pin, Hitch, .625 Dia x 4 in. |
14 |
05.73120 |
1 |
Pin, Hair, 5/32 x 2-15/16 in. Zinc Plated |
G6070/G6070P |
- 13 - |
42.0901805A Issue Date: 10/11 |
Section 2
2.02 Wheels & Tires
42.0901805A Issue Date: 10/11 |
- 14 - |
G6070/G6070P |
Section 2
2.02 Wheels & Tires
Item |
Part No. |
Quantity |
|
Description |
1 |
42.0900181 |
2 |
Wheel, 15 x 6 |
PB6000 |
|
42.1500329 |
2 |
Wheel, 16 x 6 |
G6060 |
|
42.0900165 |
2 |
Wheel, 16 x 8 G6070 & G6070P |
|
2 |
42.0900190 |
2 |
Tire, 9.5L x 15 Farm Implement, PB6000 |
|
|
42.0900191 |
2 |
Tire, 235/85R16, G6060 |
|
|
42.0900192 |
2 |
Tire, 265/75R16, G6070 & G6070P |
|
G6070/G6070P |
- 15 - |
42.0901805A Issue Date: 10/11 |
Section 3
3.01 Drive Assembly - Rotor
42.0901805A Issue Date: 10/11 |
- 16 - |
G6070/G6070P |
Section 3
3.01 Drive Assembly - Rotor
Item |
Part No. |
Quantity |
Description |
1 |
42.0900377 |
1 |
Sprocket, 120-2B48, 3-7/16 in. Bore, 7/8 in. Key - G6070 Only |
|
42.0901587 |
1 |
Sprocket, 120-2B42, 3-7/16 in. Bore, 7/8 in. Key - (G6060 S/N 42.05168 & |
|
|
|
After) |
|
42.1520124 |
1 |
Sprocket, 120-2B42, 2-15/16 in. Bore, 3/4 in. Key - (G6060 S/N 42.05167 & |
|
|
|
Before) & PB6000 Only |
2 |
42.1520664 |
1 |
Sprocket, 120-2A11, 2-7/16 in. Bore, 5/8 in. Keyway |
3 |
42.6002002 |
1 |
Key, 5/8 x 5/8 x 2-3/4 in. |
4 |
907688 |
1 |
Key, Sq, 7/8 x 7/8 x 4 in. - G6070 & (G6060 S/N 42.05168 & After) |
|
42.4070028 |
1 |
Key, Sq, 3/4 x 3/4 x 4 in. - (G6060 S/N 42.05167 & Before) & PB6000 Only |
5 |
42.0900056 |
1 |
Bar, Adjustable Chain Tensioner |
6 |
900499 |
5 |
Washer, Flat, 3/4 in. |
7 |
906339 |
1 |
Bolt, Hex, 3/4-10 x 5-3/4 in. |
8 |
42.6002007 |
1 |
Tensioner, Rotor Chain |
9 |
906349 |
2 |
Nut, Hex Lock, 3/4-10 Nylock |
10 |
09.71756 |
1 |
Bolt, Hex, 3/4-10 x 3 in. Gr 5 |
11 |
42.1500483 |
1 |
Spring, Extension |
12 |
42.0900174 |
1 |
Rod, Chain Tensioner |
13 |
900369 |
2 |
Nut, Hex, 1/2-13 |
14 |
905501 |
2 |
Zerk, Grease, 1/8 NPT Female |
15 |
900496 |
8 |
Washer, Flat, 7/16 in. |
16 |
42.0901519 |
1 |
Guard, Rotor Chain - G6070 Only |
|
42.0901518 |
1 |
Guard, Rotor Chain - G6060 & PB6000 Only |
17 |
09.71112 |
4 |
Bolt, Hex, 5/16-18 x 3/4 in. Gr 5 Special |
18 |
42.1520068 |
1 |
Link, #120-2 Connector UST |
|
42.1520086 |
AR |
Link, Offset, #120-2 |
19 |
42.1520757 |
1 |
Chain, Roller, #120-2, 7.875 Ft, 63 P, UST - G6070 Only |
|
42.1520005 |
1 |
Chain, Roller, #120-2 59P - G6060 & PB6000 Only |
20 |
42.1501518 |
1 |
Whip, Grease, 3/16 x 28 in. |
21 |
42.1502166 |
1 |
Whip, Grease, 3/16 x 21 in. |
22 |
907725 |
2 |
Setscrew, 3/4-10 x 3/4 in. |
23 |
907777 |
2 |
Setscrew, 5/8-11 x 5/8 in. |
G6070/G6070P |
- 17 - |
42.0901805A Issue Date: 10/11 |
Section 3
3.02 Hopper Assembly
42.0901805A Issue Date: 10/11 |
- 18 - |
G6070/G6070P |
Section 3
3.02 Hopper Assembly
Item |
Part No. |
Quantity |
Description |
1 |
42.6012018 |
1 |
Panel, Hopper Extension, Right Side |
2 |
42.6012011 |
1 |
Plate, Face, 86 in. |
3 |
42.6000127 |
1 |
Panel, Hopper Extension, Front 7 Ft - G6070 & G6070P Only |
|
42.0901790 |
1 |
Panel, Hopper Extension, Front 6 Ft w/Decals - G6060 & PB6000 Only |
4 |
42.0900062 |
1 |
Panel, Sloped, Hopper 7 Ft - G6070 & G6070P Only |
|
42.0900061 |
1 |
Panel, Sloped, Hopper 6 Ft - G6060 & PB6000 Only |
5 |
907234 |
37 |
Washer, Flat, 1/4 in. Stainless Steel - G6070 & G6070P Only |
|
907234 |
34 |
Washer, Flat, 1/4 in. Stainless Steel - G6060 & PB6000 Only |
6 |
907270 |
22 |
Bolt, Hex, 1/4-20 x 3/4 in. Stainless Steel - G6070 & G6070P Only |
|
907270 |
20 |
Bolt, Hex, 1/4-20 x 3/4 in. Stainless Steel - G6060 & PB6000 Only |
7 |
907389 |
23 |
Nut, Hex Lock, 1/4-20 Nylock Stainless Steel - G6070 & G6070P |
|
907389 |
21 |
Nut, Hex Lock, 1/4-20 Nylock Stainless Steel - G6060 & PB6000 |
8 |
907614 |
1 |
Bolt, Button Hd, 1/4-20 x 1-1/2 in. Stainless Steel |
G6070/G6070P |
- 19 - |
42.0901805A Issue Date: 10/11 |
Section 3
3.03Split Conveyor - G6060, G6070 & G6070P (S/N 42.04939
&Before)
42.0901805A Issue Date: 10/11 |
- 20 - |
G6070/G6070P |
Section 3
3.03 Split Conveyor - G6060, G6070 & G6070P (S/N 42.04939
& Before)
Item |
Part No. |
Quantity |
Description |
|
1 |
907784 |
16 |
Nut, Hex Flange Lock, 1/4-20 Nylock Yellow Zinc |
|
2 |
907779 |
21 |
Nut, Hex Flange Lock, 3/8-16 Nylock Yellow Zinc |
|
3 |
907399 |
8 |
Nut, Hex Flange Lock, 1/2-13 Nylock |
|
4 |
906548 |
1 |
Bolt, Carriage, Short Neck, 5/8-11 x 2-1/2 in. Gr 5 |
|
5 |
906492 |
2 |
Latch |
|
6 |
906402 |
1 |
Nut, Hex Lock, 5/8-11 Nylock |
|
7 |
905501 |
1 |
Grease Zerk, 1/8 in. NPT Female |
|
8 |
905354 |
10 |
Bolt, Carriage, 3/8-16 x 3/4 in. Gr 5 Yellow Zinc |
|
9 |
903824 |
7 |
Bolt, Hex, 1/4-20 x 5/8 in. Gr 5 |
|
10 |
903306 |
4 |
Bolt, Hex, 1/2-13 x 1-1/2 in. Gr 5 |
|
11 |
903033 |
9 |
Bolt, Hex, 1/4-20 x 1 in. Gr 5 Yellow Zinc |
|
12 |
902367 |
4 |
Bolt, Hex, 3/8-16 x 1-1/4 in. Gr 5 |
|
13 |
902364 |
6 |
Bolt, Hex, 3/8-16 x 3/4 in. Gr 5 |
|
14 |
902300 |
1 |
Bolt, Hex, 3/8-16 x 1 in. Gr 5 Yellow Zinc |
|
15 |
901172 |
1 |
Key, Square, 1/4 in. x 2 in. |
|
16 |
901105 |
12 |
Washer, Flat, 3/8 in. SAE |
|
17 |
900709 |
2 |
Link, #CA550 Offset |
|
18 |
900549 |
1 |
Key, Square, 1/4 in. x 1-3/4 in. |
|
19 |
900537 |
3 |
Fitting, grease, 1/8 PTF |
|
20 |
900498 |
2 |
Washer, Flat, 5/8 in. |
|
21 |
900497 |
12 |
Washer, Flat, 1/2 in. |
|
22 |
900496 |
3 |
Washer, Flat, 7/16 in. |
|
23 |
900493 |
15 |
Washer, Flat, 1/4 in. SAE Yellow Zinc |
|
24 |
900188 |
1 |
Sprocket, Idler, 50B17, .643 in. Bore |
|
25 |
42.6008077 |
1 |
Chain, Long w/Weld On Flight |
|
26 |
42.6008104 |
2 |
Bracket, Conveyor Nose Cone |
|
27 |
42.6008073 |
1 |
Guide, Conveyor Chain, Top RH |
|
28 |
42.6008072 |
1 |
Guide, Conveyor Chain, Top LH |
|
29 |
42.6008052 |
1 |
Skirt, Conveyor, 20 in. x 60 in. |
|
30 |
42.6008021 |
2 |
Strip, Conveyor Skirting, Side |
|
31 |
42.6008020 |
1 |
Strip, Conveyor Skirting, Center |
|
32 |
42.1502166 |
2 |
Whip, Grease, 3/16 in. x 21 in. |
|
33 |
42.1501611 |
3 |
Adaptor, #2 MP x #2 FPS |
|
34 |
42.1501519 |
2 |
Hose, Grease, 3/16 in. x 40 in. |
|
35 |
42.0900567 |
2 |
Hold Down, Conveyor Chain |
|
36 |
42.0900020 |
1 |
Mount, Hydraulic Motor |
|
37 |
42.0900019 |
1 |
Apron, Short, 16 Slat |
|
38 |
42.0900009 |
1 |
Shield, Motor |
|
39 |
42.0900007 |
2 |
Hose, Grease, 3/16 in. x 32 in. |
|
40 |
42.0900006 |
2 |
Hose, Grease, 3/16 in. x 47 in. |
|
41 |
42.0900005 |
1 |
Chain, Roller, #50, 114 Pitches |
|
G6070/G6070P |
|
- 21 - |
42.0901805A Issue Date: 10/11 |
|
Section 3
3.03 Split Conveyor - G6060, G6070 & G6070P (S/N 42.04939
& Before)
Item |
Part No. |
Quantity |
Description |
42 |
42.0900004 |
2 |
Sprocket, 50B20, 1.25 in. Bore |
43 |
42.0000101 |
1 |
Shield |
44 |
341077B1 |
1 |
Sprocket, 40B16, 1.25 in. Bore |
45 |
303629B1 |
1 |
Sprocket, 40B16, 1 in. Bore |
46 |
22.00188 |
1 |
Chain, #40-2, 16 Pitches w/ Connector |
47 |
17.00650 |
4 |
Clamp, Single, .63 in. ID |
48 |
16.20144.5 |
2 |
Hinge, Beater Shield |
49 |
09.71251 |
2 |
Bolt, Hex Washer Hd, 3/8-16 x 3/4 in. Gr 5 |
50 |
42.0901687 |
1 |
Deflector, 2 Stage Conveyor G6070 & G6070P |
51 |
42.0901796 |
1 |
Deflector, 2 Stage Conveyor w/Decals G6060 |
52 |
42.0900035 |
1 |
Adjuster, Bearing LH |
53 |
42.0900034.5 |
1 |
Adjuster, Bearing RH |
54 |
907400 |
4 |
Bolt, Hex, 1/2-13 x 6 in. Gr 5 Full Thread |
55 |
901763 |
4 |
Nut, Jam 1/2-13 |
56 |
42.6008088 |
4 |
Bearing, 2 Bolt Flange 1-1/4 in. |
57 |
42.1520773 |
6 |
Sprocket, N58, 6 Tooth, 1-1/4 in. Bore |
58 |
09.72010 |
6 |
Pin, Roll, 3/8 in. x 2 in. |
59 |
42.0900036 |
1 |
Shaft, 1-1/4 in. x 36-1/2 in. Drive |
60 |
42.0900037 |
1 |
Shaft, 1-1/4 in. x 21 in. Drive |
61 |
42.0900038 |
2 |
Plate, Bearing Mount |
62 |
601312 |
4 |
Bolt, Hex, 7/16 in. x 1-1/2 in. Gr 5 |
63 |
42.0900583 |
2 |
Plate, Bearing Mount Welded |
64 |
906243 |
4 |
Bolt, Hex, 7/16 in. x 1-3/4 in. Gr 5 |
65 |
900972 |
4 |
Nut, Hex Center Lock, 7/16-14 |
67 |
42.0901262 |
1 |
Conveyor Adjuster End Weldment |
68 |
42.6008089 |
1 |
Guard, Conveyor Idle Shaft |
69 |
42.6008088 |
2 |
Bearing, 2 Bolt Flange, 1-1/4 in. |
70 |
42.0900045 |
1 |
Shaft, 1-1/4 in. x 34-1/2 in. |
71 |
904871 |
4 |
Bolt, Hex, 7/16-14 x 1-1/4 in. Gr 5 |
72 |
907060 |
2 |
Bolt, Hex, 1/4-20 x 1-3/4 in. Gr 5 |
73 |
42.0901271 |
4 |
Sprocket, N58, 6 Tooth, Idle 1-1/4 in. Bore |
74 |
904520 |
2 |
Hook, Cover (Rubber) |
75 |
900369 |
2 |
Nut, Hex, 1/2-13 |
76 |
907389 |
2 |
Nut, Hex Lock, 1/4-20 Nylock Stainless Steel |
77 |
09.70985 |
14 |
Washer, Flat, 1-1/4 in. x 1-7/8 in. |
78 |
42.0901263 |
1 |
Weldment, Conveyor, Split w/ H Frame (Includes Items 52 thru 64) |
42.0901805A Issue Date: 10/11 |
- 22 - |
G6070/G6070P |
This Page Intentionally Left Blank
G6070/G6070P |
- 23 - |
42.0901805A Issue Date: 10/11 |
Section 3
3.04 Split Conveyor (S/N 42.04940 & After)
42.0901805A Issue Date: 10/11 |
- 24 - |
G6070/G6070P |
Section 3
3.04 Split Conveyor (S/N 42.04940 & After)
Item |
Part No. |
Quantity |
Description |
|
1 |
09.71251 |
2 |
Bolt, Hex Washer Hd, 3/8-16 x 3/4 in. Gr 5 |
|
2 |
09.72010 |
4 |
Pin, Roll, 3/8 in. x 2 in. |
|
3 |
16.20144.5 |
2 |
Hinge, Beater Shield |
|
4 |
22.00188 |
1 |
Chain, #40-2, 16 Pitches w/ Connector |
|
5 |
303629B1 |
1 |
Sprocket, 40B16, 1 in. Bore |
|
6 |
42.0900004 |
2 |
Sprocket, 50B20, 1.25 in. Bore |
|
7 |
42.0900005 |
1 |
Chain, Roller, #50, 114 Pitches |
|
8 |
42.0900006 |
1 |
Hose, Grease, 3/16 in. x 47 in. |
|
9 |
42.0900007 |
1 |
Hose, Grease, 3/16 in. x 32 in. |
|
10 |
42.0900019 |
1 |
Apron, Short, 16 Slat |
|
11 |
NSS |
1 |
Conveyor Lower Assembly - Not Serviced Separately Refer to Lower Assembly |
|
|
|
|
Split Conveyor Page for Parts Breakdown |
|
12 |
42.0901011 |
2 |
Adjuster, Chain |
|
13 |
42.0901014 |
4 |
Sprocket, CA550, 6 Tooth |
|
14 |
42.0901019 |
4 |
Bearing, R-Liube, 1-1/4 in. 2 Bolt |
|
15 |
42.0901020 |
1 |
Weldment, Conveyor |
|
16 |
42.0901022 |
1 |
Shaft, RH Drive |
|
17 |
42.0901023 |
1 |
Shaft, 1.25 in., LH |
|
18 |
42.0901035 |
1 |
Bracket, Bearing Bolts |
|
19 |
42.0901037 |
2 |
Bracket, w/Bolts, Adjuster |
|
20 |
42.0901393 |
1 |
Mount, Bracket, Drive Motor |
|
21 |
42.0901394 |
1 |
Cover, Drive Chain |
|
22 |
42.0901397 |
1 |
Shield, Motor |
|
23 |
42.0901402 |
2 |
Plate, Bearing Mount |
|
24 |
42.0901438 |
1 |
Hold Down, Conveyor Chain, Short |
|
25 |
42.0901439 |
1 |
Hold Down, Conveyor Chain, Long |
|
26 |
42.0901770 |
1 |
Deflector, 2 Stage Conveyor w/Decal |
|
27 |
42.0901688 |
1 |
Sprocket, DBL |
|
28 |
42.1501519 |
1 |
Hose, Grease, 3/16 in. x 40 in. |
|
29 |
42.1501611 |
3 |
Adaptor, #2 MP x #2 FPS |
|
30 |
42.1502166 |
1 |
Whip, Grease, 3/16 in. x 21 in. |
|
31 |
42.6008020 |
1 |
Strip, Conveyor skirting, Center |
|
32 |
42.6008021 |
2 |
Strip, Conveyor Skirting, Side |
|
33 |
42.6008052 |
1 |
Skirt, Conveyor, 20 in. x 60 in. |
|
34 |
42.6008077 |
1 |
Chain, Conveyor, Long w/Weld On Flight |
|
35 |
900188 |
1 |
Sprocket, Idler, 50B17, .643 in. Bore |
|
36 |
900369 |
12 |
Nut, Hex, 1/2-13 |
|
37 |
900480 |
2 |
Bolt, Carriage, 3/8-16 x 1 in. |
|
38 |
900493 |
13 |
Washer, Flat, 1/4 in. SAE Yellow Zinc |
|
39 |
900496 |
3 |
Washer, Flat, 7/16 in. |
|
40 |
900498 |
1 |
Washer, Flat, 5/8 in. |
|
41 |
900506 |
4 |
Washer, Lock, 1/2 in. |
42.0901805A Issue Date: 10/11 |
G6070/G6070P |
|
- 25 - |
||
Section 3
3.04 Split Conveyor (S/N 42.04940 & After)
Item |
Part No. |
Quantity |
Description |
42 |
900537 |
3 |
Fitting, Grease, 1/8 PTF |
43 |
900549 |
1 |
Key, Square, 1/4 in. x 1-3/4 in. |
44 |
900709 |
2 |
Link, #CA550 Offset |
45 |
901105 |
18 |
Washer, Flat, 3/8 in. SAE |
46 |
901172 |
1 |
Key, Square, 1/4 in. x 2 in. |
47 |
901937 |
8 |
Washer, Flat, 1/2 in. |
48 |
908333 |
4 |
Bolt, Carriage, 1/2-13 x 1-1/2 in. Gr 5 Short Neck |
49 |
902300 |
8 |
Bolt, Hex, 3/8-16 x 1 in. Gr 5 Yellow Zinc |
50 |
902364 |
2 |
Bolt, Hex, 3/8-16 x 3/4 in. Gr 5 |
51 |
902367 |
4 |
Bolt, Hex, 3/8-16 x 1-1/4 in. Gr 5 |
52 |
903033 |
9 |
Bolt, Hex, 1/4-20 x 1 in. Gr 5 Yellow Zinc |
53 |
903306 |
4 |
Bolt, Hex, 1/2-13 x 1-1/2 in. Gr 5 |
54 |
903824 |
4 |
Bolt, Hex, 1/4-20 x 5/8 in. Gr 5 |
55 |
904744 |
4 |
Bolt, Carriage, 1/2-13 x 2 in. Gr 5 |
56 |
905354 |
8 |
Bolt, Carriage, 3/8-16 x 3/4 in. Gr 5 Yellow Zinc |
57 |
905501 |
1 |
Grease Zerk, 1/8 NPT Female |
58 |
906402 |
1 |
Nut, Hex Lock, 5/8-11 Nylock |
59 |
906492 |
2 |
Latch |
60 |
906537 |
4 |
Bolt, Carriage, 1/2-13 x 5 in. Gr 5 |
61 |
906548 |
1 |
Bolt, Carriage, Short Neck, 5/8-11 x 2-1/2 in. Gr 5 |
62 |
907392 |
16 |
Nut, Hex Lock, 1/2-13 Nylock Stainless Steel |
63 |
907779 |
20 |
Nut, Hex Flange Lock, 3/8-16 Nylock Yellow Zinc |
64 |
907784 |
13 |
Nut, Hex Flange Lock, 1/4-20 Nylock Yellow Zinc |
65 |
42.1541519 |
AR |
Adapter (For Bearing With 1/4-28 Thread) |
66 |
42.1541780 |
1 |
Motor, Hydraulic, Conveyor |
66a |
16.21179 |
AR |
Seal Kit |
66b |
42.0901800 |
1 |
Key, Shaft (Hydraulic Motor) |
42.0901805A Issue Date: 10/11 |
- 26 - |
G6070/G6070P |
This Page Intentionally Left Blank
G6070/G6070P |
- 27 - |
42.0901805A Issue Date: 10/11 |
Section 3
3.05 Lower Assembly, Split Conveyor - G6060, G6070 &
G6070P (S/N 42.04940 & After)
42.0901805A Issue Date: 10/11 |
- 28 - |
G6070/G6070P |
Section 3
3.05 Lower Assembly, Split Conveyor - G6060, G6070 &
G6070P (S/N 42.04940 & After)
Item |
Part No. |
Quantity |
Description |
1 |
907472 |
1 |
Cotter Pin, Stainless Steel Hair Pin |
2 |
906483 |
5 |
Nut, Hex Lock, 5/16-18 Nylock |
3 |
906401 |
4 |
Nut, Hex Lock, 1/2-13 Nylock |
4 |
904324 |
5 |
Washer, Flat, 5/16 in. |
5 |
903690 |
5 |
Bolt, Carriage, 5/16-18 x 1 in. Gr 5 |
6 |
908333 |
4 |
Bolt, Carriage, 1/2-13 x 1-1/2 in. Gr 5 Short Neck |
8 |
901850 |
2 |
Pin, Spring, 5/16 in. x 3 in. |
9 |
900537 |
2 |
Fitting, Grease, 1/8-PTF |
10 |
900512 |
2 |
Machine Bushing, 1-1/4 in. |
11 |
42.0901034 |
1 |
Weldment, Conveyor End Frame |
12 |
42.0901019 |
2 |
Bearing, R-Lube, 1-1/4 in. 2 Bolt |
13 |
42.0901009 |
1 |
Pin, Conveyor Door Latch |
14 |
42.0901767 |
1 |
Clean Out Door w/Decals |
15 |
42.0901003 |
1 |
Deflector Weldment, Adjustment End |
16 |
42.0901002 |
1 |
Shaft, 1-1/4 in. x 34-3/4 in. |
17 |
42.0900987 |
4 |
Conveyor Roller, 1.250 in. Bore |
18 |
42.1541519 |
AR |
Adapter (For Bearing With 1/4-28 Thread) |
G6070/G6070P |
- 29 - |
42.0901805A Issue Date: 10/11 |
Loading...