Loading...
BLUEZ 2
WIRELESS BONE CONDUCTION HEADPHONES
Parts descriptions
•Transducers: Two soft pads, each about the size of a thumbnail, that rest on the cheekbones. The Transducers are housed on both ends of the headphones.
•Multi-Function Button: Triangular button located on the outside of the left transducer housing. The Multi-Function Button is raised slightly above the surface of the transducer housing. This button is used in a variety of ways and will be further explained in this document.
•On the right side of the headset, as worn, there are three controls. Starting at the back is the Volume Control, in the middle is the Micro-USB Charging Port and at the front, the Power Button (with a small LED light).
•Volume Control: The Volume Control is a rocker switch, located on the right hand side of the device. There is a raised dot at the front, which increases volume, while the opposite end of the rocker switch decreases volume.
•Micro-USB Charging Port: The Micro-USB Charging Port is located on the right side of the headphones (as worn) and enclosed by a small protective hinged cover. The hinged cover can be lifted by using a fingernail. When the hinged cover is lifted, the Micro-USB charging port is revealed.
•Power Button: The Power Button is a small raised button located next to the Micro-USB Charging port, closest to the left transducer. When wearing the headphones, press the Power Button to turn on the device. When powering on, the headphones will vibrate and Audrey’s voice will prompt with the phrase: “Welcome to Bluez 2”. When powering off, the headphones will vibrate and play four descending beeps, then turn off.
•LED Indicator: The LED Indicator, near the Power Button, is a small light that indicates charging status visually. When fully charged, the LED
Indicator will appear blue, and when the device is being charged, the LED
Indicator will appear red.
Accessories
•Adjustable Tension Band
•Micro-USB Charging Cable
•Reflective Stickers
•Weatherproof Storage Pouch
•Warranty Registration Card
What’s special?
•Bluez 2 are stereo Bluetooth headphones with wireless phone and music functions that rely on bone conduction technology to transmit sound.
•The patent-pending OpenFit™ design promises ambient sound awareness and extended comfort that is unmatched with traditional headphones.
•PremiumPitch™ is our patent-pending technology that provides the finest and most detailed audio.
•LeakSlayer™ is a patent-pending feature that decreases natural sound leakage.
•A nanotechnology coating and watertight rubber gaskets repel sweat and moisture from the inside out.
•Equalization presets customize bass and vibration on the go.
•Dual noise canceling microphones exclude surrounding noise, effectively enhancing speech.
•Audrey Says™ voice prompts seamlessly guides you through power, pair, play and talk.
Loading...