AfterShokz ASCEB6, ASCEHB6 User Manual
Microphone 2
Microphone 1
AEROPEX
User Guide
ENGLISH
How to Set Up Aeropex
1. Charge
Charge the headphones with the included magnetic charging cable. The
LED indicator will turn from red to blue when charging is complete.
2. Pair
Start with your headphones off. Enter pairing mode by pressing and
holding volume+ until Audrey says “pairing” and the LED indicator flashes
red and blue.
3. Connect
Open your device’s Bluetooth
Audrey says “connected” and the LED indicator will flash blue one time.
Let us take care of you! We’ve got your back against defects.
®
menu and select “Aeropex by AfterShokz.”
Register your Aeropex at
register.aftershokz.com
Multifunction Button
Multifunction Button (A)
Function Action Prompt / “Audrey Says™”
Play / pause music Click once
Skip to next song
Skip to previous song
Answer call Click once
End call
Answer call waiting and
hang up on current caller
Reject a call Press and hold for 2 seconds Two beeps
Prompt device assistant Press and hold for 2 seconds
Redial last number Double-click (when idle) "Redial last number"
Double-click
while music is playing
Three-click
while music is playing
Click once One beep
Press and hold for 2 seconds One beep
One beep
One beep
One beep
Two beeps
Device beep
LED Indicator
Power
Magnetic
Charging Port
Volume
Volume+ / Power Button (B); Volume- Button (C)
Function Action Prompt / “Audrey Says™”
Power on
Power off
Mute
Change EQ
setting
Check battery
status
Adjust volume
Press and hold volume+ for 2
seconds
Press and hold volume+ for 3
seconds
Press and hold both buttons for
2 seconds while on a call
Press and hold both buttons for
3 seconds while music is playing
Click the volume+ or volumebutton while music is paused
Click the volume+ or volume- button
to adjust volume while music is playing
“Welcome to AfterShokz”
“Power off”
“Mute on” or “Mute off”
“EQ changed”
“Battery high/Battery medium/
Battery low/Charge me”
One beep
Specifications
AS800 20Hz~20KHz
Part number
Speaker type
Bluetooth® version Microphone
Bone conduction transducer
Frequency response
Sensitivity
®
v5.0
105 ± 3dB
-38dB ± 3dBBluetooth
A
B C
Wireless range
Compatible profiles
Continuous play Standby time
Charge time
Frequency band Maximum RF output power
Maximum charge voltage
Speaker impedance
A2DP, AVRCP, HSP, HFP
Up to 6 hours
2402MHz~2480MHz 4dBm
11.4 omh
10 m
2 hours
5.0V±5%
Battery
Weight
Warranty
Water resistance
Battery capacity
Li-Polymer battery
LED Indicator
Solid red Charging
Solid blue Charging complete
Flashes red and blue Pairing mode
Flashes blue Incoming call
Flashes red every 2 minutes Low battery
26 g
Up to 10 days
2 years
IP67
145 mAh
D
Multipoint Pairing
Multipoint pairing allows Aeropex to be connected to two devices at once,
allowing users to seamlessly transition between the two.
Start with your headphones off.
1.
2.
Press and hold volume+ until Audrey says “pairing” and the LED indicator flashes
red and blue.
Press and hold the multifunction button and volume+ button for 3 seconds.
3.
Audrey says "multipoint enabled."
4.
Open your first device's Bluetooth® menu and select "Aeropex by AfterShokz."
Audrey says "connected"
5.
Turn your headphones off.
6.
Re-enter pairing mode by pressing and holding volume+ until Audrey says “pairing”
and the LED indicator flashes red and blue.
7.
Open your second device's Bluetooth® menu and select "Aeropex by AfterShokz."
Audrey says "connected."
8.
Turn your headphones off.
9.
Turn your headphones on. Your headphones are now connected to both devices.
10.
To turn multipoint pairing off: Press and hold the multifunction button and volume-
button for 3 seconds. Audrey says "multipoint disabled."
Charging Port Alert
This device has the function of liquid residue detection. During charging, if there is
sweat and other liquid residues in the charging interface,the device will flash
"Red-Blue" lights，in the same time the headphone core vibrates and emits a "Di-Di"
warning sound. Please dry the liquid on the charging port of the device，then the
device can be charged back to normal.
How to Reset Your Headphones
1. Start with your headphones off.
2. Enter pairing mode by pressing and holding volume+ until Audrey says “pairing”
and the LED indicator flashes red and blue.
3. Press and hold the multifunction button, volume+ button and volume- button
(all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or
feel vibrations.
4. Turn your headphones off.
Aeropex
is now reset and can be re-paired to your device.
Optional Accessories
Earplugs (D)
Use with headphones in environments where it is safe to block out ambient noise,
such as on a train or airplane.
1. Roll earplugs firmly between fingers and place in ears.
2. To adjust EQ settings to reduce or enhance bass while wearing earplugs, press
and hold volume+ and volume- buttons simultaneously.
3. Switch EQ to original setting when you take out the earplugs.
Manufacturer
AfterShokz LLC
6057 Corporate Dr., East Syracuse, NY 13057
简体中文
设置你的 Aeropex
1. 充电
通过磁吸充电头充电。充电完成后指示灯显示为蓝色。
2. 配对
按下开关键5秒进入配对模式，指示灯红蓝交替闪烁。
3.连接手机
打开手机蓝牙设置，选择“Aeropex By AfterShokz”， 听到语音提醒“已连接”，
配对成功，蓝灯闪烁一次。
多功能键（A）
功能 操作 语音提醒功能 操作
播放/暂停音乐 单击
下一首歌曲
接/挂电话
接第二个来电，
同时保持当前通话
接第二个来电，同时
挂断当前通话
拒接来电
语音拨号
拨打上一次通话
歌曲播放时双击
来电时/通话时单击
单击切换通话
按住2秒
按住2秒
按住2秒
双击（非播放状态下）
语音提醒
一声提示音
一声提示音
两/一声提示音
一声提示音
一声提示音
两声提示音
设备提示音
“拨打上一个电话”
音量加/开关键 （B）; 音量减 （C）
开机
关机 “已关机”
静音
切换EQ
检查电池电量
调整音量 按下B或C键
按住开关键2秒
按住开关键3秒
通话时同时按住B，C键2秒
播放音乐时同时按住B，C键3秒
音乐暂停时按下B或C键
耳机规格
型号 扬声器
频段
麦克风敏感度 蓝牙版本
“欢迎使用韶音骨传导耳机”
“静音开”或 “静音关”
“音效切换”
“电量高”、“电量中等”、
“电量低”或“请充电””
一次提示音
AS800
20Hz~20KHz
-38dB ± 3dB Bluetooth® v5.0
蓝牙连接距离
骨传导扬声器
10米
蓝牙协议 A2DP, AVRCP, HSP, HFP
电池
待机
重量
最大充电电压
麦克风阻抗
锂电池
20天
26克
5.25 V
11.4 omh
持续播放
充电时间
保修
防水等级
电池容量
6 小时
2小时
2年
IP67
145 mAh
多点连接
多点连接允许 Aeopex 能同时连接两台设备，实现两台设备间的无缝切换。
1. 确保耳机处于关机状态。
2. 长按音量+键至少5秒直至红蓝灯交替闪烁，进入配对模式（语音提示：正在配对）
3. 按住多功能键和音量+键3秒 (语音提示: 开启双重配对)
4. 打开第一台设备的蓝牙,并且选择“Aeopex by AfterShokz” (语音提示: 已连接)
5. 关闭耳机
6. 重新进入配对模式
7. 打开第二台设备的蓝牙,并且选择“Aeopex by AfterShokz” (语音提示: 已连接)
8. 关闭耳机
9. 长按音量+键3秒，听到提示音“欢迎使用韶音骨传导耳机”, 此时您的耳机会
自动连接两台设备，并分别听到语音提示“已连接”和“第二台设备已连接”，
至此多点连接完成。
LED 指示灯
红色（常亮）
蓝色（常亮）
红蓝交替闪烁
蓝色（闪烁）
每隔两分钟闪烁红灯
充电中
充电完成
配对模式
来电
电量低
存储和维护
耳机应当存放在阴凉干燥处。工作温度应在0～45℃。工作在过冷、过热或过度潮湿
环境可能会缩短电池的寿命。
存储很长一段时间后，请在使用前再次充电。
该耳机是防水溅的，但并不完全防水。请不要将耳机浸入水中。
过高音量下听音乐可能会损伤您的听力，声音也可能会失真。
请用柔软的干布清洁耳机。
运动过后请不要立即充电，以免充电口里面可能残留的汗水导致耳机电路损伤。
充电之前保持充电口干燥会降低耳机损坏的风险。
汗水预警
本设备具有液体残留检测功能。充电时，如充电接口有汗水等液体残留，设备将会有"
红蓝灯"闪烁，耳机芯震动并发出"滴滴"警示音。请擦干设备充电口上液体，设备可恢
复正常充电。
可选配件
耳塞 (D)
在飞机或者列车上，可以配合耳塞一起，来隔绝外界噪音，体验更好的骨传导传音。
1. 将耳塞揉小，并塞入耳朵中。
2. 播放音乐时，同时按住音量加减键，调整到佩戴耳塞时专用的EQ，
感受最佳视听体验。
3. 不用耳塞时，用同样的方式将EQ切换到正常状态。
恢复出厂设置
进入配对模式，按住多功能键，音量+键和音量-键3秒，
直至听到两声提示音并感受到振动。
如何联系我们
AfterShokz LLC
6057 Corporate Dr., East Syracuse, NY 13057
生产厂商：深圳市韶音科技有限公司
地址：深圳市宝安区石岩街道石新小区山城工业区14#厂房1楼、4楼
电话：400-6830-858
Loading...