AeroGarden PV 10, PV 1500, PV 2800 User Manual

REPLACING AEROGARDEN BASE

(For AeroGarden Classic, AeroGarden Deluxe, AeroGarden PRO

Remove Lamp Hood from Lamp Arm:

Unplug AeroGarden; remove Bowl from Base.

1 1

Disconnect Lamp Cord from Lamp Hood

2 2

socket and remove Grow Bulbs from
Lamp Hood. CAUTION –Grow Bulbs

may be hot!

Turn AeroGarden around so the back

3 3

is facing you.

Press in on Locking Tab 1 located on

4 4

Lamp Hood vent.

At the same time, use other hand to

5 5

push up on silver ring (where Lamp Hood
attaches to Lamp Arm).

100

and AeroGarden PRO

Locking

Tab 1

Lamp
Hood

Lamp Arm

Base

Remove Lamp Arm from Base:

Push in Locking Tab 2 near the bottom

1 1

of Lamp Arm with a screwdriver
or pen.

Pull up on Lamp Arm while pushing in

2 2

on Locking Tab 2.

Locking

Tab 2

200

)

To install Base:

Insert Lamp Arm into new Base. Push down

1 1

until you hear a “click.”

Push Lamp Cord rmly into socket in

2 2

Lamp Hood.

Center hands over Lamp Arm and push

3 3

Lamp Hood down until you hear a “click.”

Insert Grow Bulbs; return Bowl to Base;

4 4

plug in AeroGarden.

Refer to your Quick Start Guide for more help
or nd it online at www.aerogardensupport.com.

© 2008 Aero Grow Internation al, Inc.

300418AA 6/3/08

Lamp Arm Lamp Arm

Base Base