AeroGarden 100733-DSS, PRO200 User Manual
Quick Start
Guide
Simple Steps
English
To Get Your “Trellis-Ready”
PRO
200
Up and Growing
KEEP THIS GUIDE!
CONGRATULATIONS
On your purchase of the AeroGarden PRO
With this upgraded AeroGarden you get all the features of the original AeroGarden,
enhanced with…
• “24-Hour Light” Setting – that lets you override the built-in light timer and decide
how much light your plants receive (see details on page 10).
• 24” Extendable Arm – which gives you the flexibility to grow tall plants, such as
full-size tomato plants and bell peppers.
• Enhanced Lamp Hood – with 3 Deluxe Grow Bulbs, providing more light than the
original Grow Bulbs, giving larger plants the light needed to grow and thrive.
• “Replace Grow Bulbs” Indicator – alerts you to replace Deluxe Grow Bulbs. With
this feature, you’ll be sure plants are always getting the right intensity and full spectrum of light needed for optimal growth.
• Optional Deluxe Trellis System (not included) – lets you easily support heavy,
fruit-filled branches on full-size plants such as tomatoes, peppers and cucumbers.
200
!
Model #s: 100733-DSS
Input Voltage: 115V, 60Hz, 1.5A
Date Code:
IMPORTANT SAFETY INSTRUCTIONS
(SAVE THESE INSTRUCTIONS)
When using this AeroGarden PRO
200
electrical furnishing, basic precautions should always be followed, in-
cluding the following:
Read all instructions before using this AeroGarden furnishing.
1. To reduce the risk of electric shock, the AeroGarden PRO
DANGER
2. Always unplug AeroGarden PRO
WARNING
3. Unplug AeroGarden PRO
4. Close supervision is necessary when AeroGarden PRO
5. Use AeroGarden PRO
manufacturer.
6. Never operate AeroGarden PRO
damaged, or if it has been dropped in water. If any of these conditions occur/exist, contact www.aerogardensupport.com or
your country’s local distributor for instructions.
7. Keep cord away from heated surfaces.
8. Never operate furnishing with air openings blocked. Keep air openings free of lint, hair, and the like.
9. Never drop or insert any object into any electrical openings.
10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
12. Do not touch moving parts or hot parts such as pumps, bulbs, reflective surfaces, and the like.
13. To disconnect, remove plug from outlet.
14. Do not place or submerse base, cord, plug, or lamp hood in water or other liquid to clean it.
15. Do not allow water to contact hot light bulbs.
16. Use only approved and supplied parts and accessories. Use only lamp model 100633 (N. America) or 200633 (Europe & Australia) Grow Bulbs with this AeroGarden model. Use of any other kind of accessory is not recommended. Replacement parts can
be ordered from www.aerogardensupport.com or from your retailer.
17. Do not use AeroGarden PRO
18. This product is intended for household and residential use only. This product is not approved for commercial applications.
19. Read and follow all important notices on the AeroGarden PRO
20. If supply cord is damaged, it must be replaced by manufacturer, its service agent, or similarly qualified technician in order to
avoid a hazard.
– to reduce risk of electric shock:
200
from electrical outlet before cleaning or changing Grow Bulbs (light bulbs).
– to reduce risk of burns, fire, electric shock, or injury to persons:
200
from outlet before putting on or taking off parts.
200
only for its intended use as described in the instructions. Do not use attachments not recommended by
200
if it has a damaged cord or plug, if it is not working properly, if it has been dropped and
200
for other than intended purpose.
200
has a specific plug. Do not change the plug in any way.
200
is used by or near children, invalids, or disabled persons.
200
and in the accompanying literature.
21. Electrical wiring must be in accordance with local regulations.
22. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance by a
person responsible for their safety.
23. Children should be supervised to ensure they do not play with the appliance.
SAVE THESE INSTRUCTIONS
1
Master Gardener
Wonderful Plants
Seed Kit
1
Quick Start Assembly (No tools required)
Unpack Your AeroGarden
A
PRO
Lamp Hood
(front view)
Bowl
(front view)
Base
(front view)
200
Lamp Arm
(back view)
Insert Lamp Arm
B
into Base
Push
Lamp Arm
down until
you hear
a “click.”
Lamp Arm
(back view)
Base
(back view)
Deluxe Grow Bulbs (3) 2 Seed Kits
Insert Deluxe Grow Bulbs
C
into Lamp Hood
Lamp Hood (bottom view)
Push straight in.
DO NOT TWIST BULBS!
Remember to replace Grow Bulbs every 6 months.
D
Plug Lamp Cord
into Lamp Hood
Push Lamp Cord
firmly into socket
in Lamp Hood.
Lamp
Cord
Instructions Continued On Next Page
2
1
Quick Start Assembly (continued)
Place Lamp Hood
E
on Lamp Arm
Center hands
over Lamp Arm
and push Lamp
Hood down
until you hear a
“click.”
(back view)
F
Set Bowl into Base
(front view)
Check to be sure that
is securely in place.
Bowl
G
Moving Your
AeroGarden PRO
Use one hand to
grasp
Lamp Arm
Gently slide AeroGarden
toward the surface edge and
place other hand under
.
Base
200
NEED ADDITIONAL HELP?
For supplies and information, visit…
www.aerogardensupport.com
.
3
Wonderful Stuff
Place Your Garden
H
In: A 60-75°F
(16-24°C)
environment
(optimal)
On: A sturdy, watertolerant surface
(Metal surfaces may cause
noise due to vibration)
Under: A space that
allows 35” (89cm)
clearance for the full
height of raised lamp
Away From
Near: A standard
electrical outlet, per
local regulations
68°F/20°C
Note: Do not place beneath
under-cabinet lights.
Reach of children and pets
Direct sources of heat (e.g., stove, furnace vents)
Direct sources of cold air (e.g., window drafts, A/C vents)
For Optimal Tending & Harvesting, Also Consider
Easy access to un-softened water
4
Loading...