AeroGarden 300417AA User Manual

REPLACING LAMP HOOD

(For AeroGarden Classic, AeroGarden Deluxe, AeroGarden PRO

Remove Lamp Hood from Lamp Arm:

Unplug AeroGarden; remove Bowl from Base.

1 1

Disconnect Lamp Cord from Lamp Hood

2 2

socket and remove Grow Bulbs from
Lamp Hood. CAUTION –Grow Bulbs

may be hot!

Turn AeroGarden around so the back

3 3

is facing you.

Press in on Locking Tab 1 located on

4 4

Lamp Hood vent.

At the same time, use other hand to

5 5

push up on silver ring (where Lamp Hood
attaches to Lamp Arm).

100

and AeroGarden PRO

Locking

Tab 1

Lamp
Hood

Lamp Arm

Base

To install Lamp Hood:

Push Lamp Cord rmly into socket in new

1 1

Lamp Hood.

Center hands over Lamp Arm and push

2 2

Lamp Hood down until you hear a “click.”

Insert Grow Bulbs; return Bowl to Base; and

3 3

plug in AeroGarden.

Refer to your Quick Start Guide for more help or
nd it online at www.aerogardensupport.com.

200

)

© 2008 Aero Grow Internation al, Inc.

300417AA 6/3/08