Space•Saver 6 Model #s – 100602-BLK; 100602-WHT;
100602-SLR; 100603-BSS
Input Voltage: 120V, 60Hz, 1.5A
KEEP THIS GUIDE !
Date Code:
Page 2
IMPORTANT SAFETY INSTRUCTIONS
(SAVE THESE INSTRUCTIONS)
When using this AeroGarden Space•Saver 6 electrical furnishing, basic precautions should always be
followed, including the following:
Read all instructions before using this AeroGarden furnishing.
1. To reduce the risk of electric shock, the Space•Saver 6 has a specic plug. Do not change the plug in any way.
DANGER – to reduce risk of electric shock:
2. Always unplug Space•Saver 6 from electrical outlet before cleaning or changing Grow Bulbs (light bulbs).
WARNING –
3. Unplug Space•Saver 6 from outlet before putting on or taking off parts.
4. Close supervision is necessary when Space•Saver 6 is used by or near children, invalids, or disabled persons.
5. Use Space•Saver 6 only for its intended use as described in the instructions. Do not use attachments not recommended by
manufacturer.
6. Never operate Space•Saver 6 if it has a damaged cord or plug, if it is not working properly, if it has been dropped and damaged, or if it has been dropped in water. If any of these conditions occur/exist, contact www.aerogardensupport.com or
your country’s local distributor for instructions.
7. Keep cord away from heated surfaces.
8. Never operate furnishing with air openings blocked. Keep air openings free of lint, hair, and the like.
9. Never drop or insert any object into any electrical openings.
10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
12. Do not touch moving parts or hot parts such as pumps, bulbs, reective surfaces, and the like.
13. To disconnect, remove plug from outlet.
14. Do not place or submerse base, cord, plug, or lamp hood in water or other liquid to clean it.
15. Do not allow water to contact hot light bulbs.
16. Use only approved and supplied parts and accessories. Use only lamp model 100340 (N. America) or 200340 (Europe &
Australia) Grow Bulbs with this Space•Saver 6 model. Use of any other kind of accessory is not recommended. Replacement parts can be ordered from www.aerogardensupport.com or from your retailer.
17. Do not use Space•Saver 6 for other than intended purpose.
18. This product is intended for household and residential use only. This product is not approved for commercial applications.
19. Read and follow all important notices on the Space•Saver 6 and in the accompanying literature.
20. If supply cord is damaged, it must be replaced by manufacturer, its service agent, or similarly qualied technician in order
to avoid a hazard.
21. Electrical wiring must be in accordance with local regulations.
22. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance
by a person responsible for their safety.
23. Children should be supervised to ensure they do not play with the appliance.
to reduce risk of burns, re, electric shock, or injury to persons:
1
SAvE THESE INSTRUCTIONS
Page 3
Add
Nutrients
Replace
Bulbs
1
Quick Start Assembly (No tools required)
Unpack Your
A
Lamp Hood
(front view)
Lamp Arm
(back view)
Space•Saver 6
Deluxe B
Grow Bulbs (2)
Bowl
B
Insert Lamp Arm
into Base
Push
Lamp Arm
down until
you hear
a “click.”
Lamp Arm
(back view)
Base
(back view)
Base
(front view)
C
Insert Deluxe B Grow Bulbs
into Lamp Hood
Push straight in.
DO NOT TWIST BULBS!
Seed Kit
Lamp Hood
(bottom view)
D
Plug Lamp Cord
into Lamp Hood
Lamp
Cord
Push Lamp Cord
rmly into socket in
Lamp Hood.
Remember to replace Grow Bulbs every 6 months.
Instructions Continued On Next Page
2
Page 4
Add
Nutrients
Replace
Bulbs
Add
Nutrients
Replace
Bulbs
1
Quick Start Assembly (continued)
Place Lamp Hood
E
on Lamp Arm
Center hands over
Lamp Arm and push
Lamp Hood down until
you hear a “click.”
(back view)
F
Set Bowl into Base
(front view)
Be sure that Bowl is securely seated
on Air Coupling in Base.
Air Coupling
Moving Your
G
Use one hand to
grasp Lamp Arm.
Gently slide your Space•Saver 6 toward the
surface edge and place other hand under Base.
Space•Saver 6
NEED ADDITIONAL HELP?
For supplies and information, visit…
www.aerogardensupport.com
3
Page 5
Place Your Garden
H
In: A 60-75°F
(16-24°C)
environment
(optimal)
On: A sturdy, watertolerant surface
(Metal surfaces may cause
noise due to vibration)
Under: A space that
allows 22” (56cm)
clearance for the full
height of raised lamp
Near: A standard
electrical outlet, per
local regulations
68°F/20°C
Note: Do not place beneath
under-cabinet lights.
Away From
Reach of children and pets
Direct sources of heat (e.g., stove, furnace vents)
Direct sources of cold air (e.g., window drafts, A/C vents)
For Optimal Tending & Harvesting, Also Consider
Easy access to un-softened water
4
Page 6
Add
Nutrients
Replace
Bulbs
Grow Surface
Front Center
Front SideFront Side
Back
Genovese Basil
(
Sprouts in 3-7 d ays)
Tall
2
A
Planting Your Garden
Add Water Using a Spouted Container
Lift View Door
FILL TO
HERE
Water level indicator gradually changes from red to green as water is
added. Water level indicator is GREEN when Bowl is full.
Fill to “Fill To Here”
(
located below View Door)
When additional water is needed, water level indicator will be Red. Add water
to raise level up to “Fill To Here” inside Bowl.
It is okay to add water up to “Fill To Here” before water level indicator turns red.
Amount of
Water To Be
Added:
3 quarts or...
2.8 liters
Use room temperature
municipal tap, bottled or
puried water. Do not use
well or softened water.
Plan Your Garden Layout
B
Use height information on Seed Pod
Label to decide where to place each
Seed Pod in Grow Surface.
Note: Location of Seed Pod in Grow Surface does
not matter if all plants are the same height.
5
For best results plant Seed Pods labeled…
”Tall” – in Back or Front Center openings (see diagram below)
”Medium” – in Front Center or Back openings
”Short” – in Front Side openings
Page 7
Add
Nutrients
Replace
Bulbs
Plant Your Garden
C
If you are planting…
Herbs or Flowers- arrange Seed Pods by plant height (see “Plan Your Garden Layout” on page 5).
Tomatoes or Peppers - place one Seed Pod in each Front Side opening and one Seed Pod in either Back
opening. Plant Spacers should be placed in Front Center and remaining Back openings.
Green Beans or Salad Greens - place Seed Pods anywhere, all plants are the same height.
Master Gardener Kit - arrange Pods in Grow Surface according to plant height. Re-arranging may be required
as plants grow.
Create a Custom Garden – combine two AeroGarden 3 Seed Kits.
Important guidelines to consider when combining Seed Kits…
• Only combine kits from the same Series, e.g., ower with ower, herb with herb, etc.
• Consider plant height when combining Seed Pods from two 3-pod Seed Kits. Refer to “Plan Your Garden
Layout” on page 5, when deciding where to place Seed Pods in your Space•Saver 6.
• Use two nutrient tablets for each feeding.
– Use both individual Starting Nutrients from each 3-pod Seed Kit when planting your Space•Saver 6.
– All Other Feedings – use Growing Nutrients from one Seed Kit (2 at a time) until they are gone, then use
the other Growing Nutrients from second Seed Kit.
Insert Seed Pods into Grow Surface
openings. Check to see that…
• There is a Seed Pod or Plant Spacer in
every opening.
• Seed Pod Labels are facing forward for
easy identication.
Bio-Domes
Nutrients
Seed Pod
™
Grow Surface
6
Page 8
Add
Nutrients
Replace
Bulbs
Add
Nutrients
Replace
Bulbs
2
D
Planting Your Garden(continued)
Place Bio-Domes on Seed Pods
Bio-Dome
Place a Bio-Dome on
each Seed Pod.
Add Starting Nutrient Tablets and Record Planting Date
E
Note: Do not remove Bio-Domes until seeds
have sprouted. NEVER REMOVE SEED
POD LABELS.
Record Planting Date
Record the date you planted your Space•Saver 6 on the
front cover of the Guide that came with your Seed/Plant Kit.
Add 2 tablets*
from bag labeled
“Starting Nutrients”
directly into Bowl.
See "Add Nutrients" (Feed Garden - Basic Feeding) on page 11 of
this guide for additional feeding instructions.
*When combining two AeroGarden 3 Seed Kits, be sure to use 2 nutrient
tablets when feeding your Garden (see “Create a Custom Garden” on
page 6).
7
Page 9
Add
Nutrients
Replace
Bulbs
Salad
Greens
Flowers
Live PlantsVegetables
Herbs
Replace
Bulbs
24-Hour
Light
Add
Nutrients
3
A
Starting Your Garden
Plug Cord into Electrical Outlet
What will happen…
1
A green light on the Control Panel willl come on.
2
Grow Bulbs will come on.
Look under Lamp Hood to see if both bulbs are lit.
If not, check to see if:
• Grow Bulbs are properly inserted into
Lamp Hood (see page 2, step 1C).
•Lamp Cord is plugged into Lamp Hood
(see page 2, step 1D).
• You are getting power through the
electrical outlet.
Plug in
3
Air bubbles should be visible inside Bowl.
If not, check to see if:
• Bowl is securely seated on Air Coupling in Base (see page 3, step 1F).
Select Setting
B
Press SELECT button until you reach the type of plants you are growing (Salad Greens, Herbs, etc.)
Note: Depending on the plant type selected, your
Space•Saver 6 lights will automatically turn
on and off at pre-programmed intervals.
8
Page 10
Replace
Bulbs
24-Hour
Light
Add
Nutrients
3
C
Starting Your Garden(continued)
Your Light Timer
1
Your Light Timer is Set To Start
Growing Your Plants...Starting Now!
2
If You Would Like to Change the
Time of Day Your Lights Go Off...
See page 10.
• Your lights will stay on for about 16 hours and will shut off for about 8 hours*.
• Your lights will come on every day at the time you plugged in your Space•Saver 6.
*Except when using “24-Hour Light” setting (Elite models only, see below), which sets lights to be on for 24 hours.
Space•Saver 6 Elite “24-Hour Light” Setting
The “24-Hour Light” setting allows you to override the
built-in light timer and keep the lights on 24 hours a
day. You can also customize the amount of light plants
receive by manually turning lights on and off using the
“Lights” button, or setting automatic on/off times, using
a standard light timer.*
Use the “24-Hour Light” setting when growing plants
that thrive with continual light and moisture, such as
leafy greens and some herbs.
For the more experienced gardener, the “24-Hour Light”
setting provides added exibility when planting a
custom garden. You are no longer limited to the preprogrammed light schedules associated with each plant
type (such as Vegetables, Herbs, etc.).
NOTE: The “24-Hour Light” setting is not recommended for
Flower or Vegetable plants – they require a daily dark period
to produce flowers.
Space•Saver 6 Elite – “24-Hour Light “ Setting
• Press and release “Select” until white light next to
“24-Hour Light” is illuminated.
• To exit “24-Hour Light” setting, simply push the “Select”
button.
* Not included. If you use a light timer to turn lights on and off, the
nutrient timer and pump will stop whenever lights are OFF. Both
will start up again when lights turn back on.
Nutrient timer does not record the time elapsed when lights are
off. To ensure your plants are fed every 2 weeks, we recommend
keeping track of your feeding schedule on a calendar.
9
SelectIlluminated “24-Hour Light”
Once your Space•Saver 6 Elite is set on “24-Hour Light” setting, lights will remain on 24 hours a day. To shorten the
amount of time lights are on, quickly press and release “Lights” button, and lights will turn off. Lights will automatically
come back on within 12 hours – or, you can press and release the “Lights” button again, to turn lights back on.
Page 11
Add
Nutrients
Replace
Bulbs
Salad
Greens
Flowers
Live PlantsVegetables
Herbs
Replace
Bulbs
24-Hour
Light
Add
Nutrients
Personalize Your Light Timer(optional)
Your Space•Saver 6 has lights and a built-in timer that automatically provide your plants with “sunlight” (about 16
hours) and “night” (about 8 hours). As long as your plants get this amount of light, it does not matter when the lights
are turned off.* Many people nd it convenient to have the lights go on in the morning and off at night to match
their own wake and sleep schedule.
*The exceptions to this are Flower & Vegetable plants. They require a daily dark period in order to produce owers. If your plants will receive any room light
during the day (natural or articial), we recommend setting your Space•Saver 6 lights to be on during the day.
5 Simple Steps...
To make this as easy as possible, you only need to set the time you want your Space•Saver 6 lights to go off (Off Time)
and your built-in light timer automatically sets the On Time...nothing more for you to do.
Do the following to set the time you want your lights to go off:
1
Decide when you want the lights to go OFF.
2
AT THAT TIME check that lights are on. If they are off, quickly press and release “Lights” button.
(Lights must be on to reset timer.)
3
With lights on, press and hold “Lights” button until the light next to the plant type you selected
starts blinking – about 5 seconds.
4
Release the button.
5
When blinking stops (about 9 seconds), the lights will go off and your lights are now set to go
off at this time every day.
You can reset your timer as often as you wish.
Blinking Light
(if you selected Herbs)
Lights Button
Blinking Light
(if you selected Herbs)
Lights Button
In case of power failure, your Space•Saver 6 has a backup system that stores light, nutrient & replace bulbs timers and plant
selection settings. When power is restored, your Space•Saver 6 will go back to the Off-On cycle you have set.
10
Page 12
Add
Nutrients
Replace
Bulbs
Replace
Bulbs
24-Hour
Light
Add
Nutrients
Basic Reminders About Your AeroGarden
Space•Saver 6 Control Panel
ADD NUTRIENTS (Feed Garden - Basic Feeding)
When “Add Nutrients” light illuminates (every 2 weeks),
add 2 nutrient tablets and ll Bowl with water up to “Fill To Here.” Press “Reset” button to restart nutrient timer
and turn off light.
REPLACE BULBS
When light illuminates (after 6 months of use), it is time to
replace Deluxe B Grow Bulbs. Additional Grow Bulbs can be
ordered at www.aerogardensupport.com or from your
retailer. After replacing Grow Bulbs, press “Reset” button to
restart grow bulb timer and turn off light.
SELECT
The number of hours lights are on and off
depends on which plant type is selected.
LIGHTS ON/OFF
Use to occasionally override built-in light timer.
Once pushed, lights will stay off/on until the
next time built-in light timer is set to go
on/off. This will not affect the timing of your
light cycle and occasional use of this feature
will not harm your plants.
Space•Saver 6 Elite Control Panel
ADD NUTRIENTS (Feed Garden - Basic Feeding)
When “Add Nutrients” light illuminates (every 2
weeks), add 2 nutrient tablets and ll Bowl with water
up to “Fill To Here.” Press “Reset” button to restart
nutrient timer and turn off light.
REPLACE BULBS
When light illuminates (after 6 months of
use), it is time to replace Deluxe B Grow Bulbs.
Additional Grow Bulbs can be ordered at
www.aerogardensupport.com or from
your retailer. After replacing Grow Bulbs,
press “Reset” button to restart grow bulb
timer and turn off light.
24-HOUR LIGHT
White light indicates
Space•Saver 6 Elite is on
24-Hour Light setting.
SELECT
The number of hours lights are on and off
depends on which plant type is selected. Use
“Select” button to reach “24-Hour Light” setting
(see page 9).
LIGHTS ON/OFF
Use to occasionally override
built-in light timer. Once pushed,
lights will stay off/on until the
next time built-in light timer is
set to go on/off. This will not affect the timing of your light cycle
and occasional use of this feature
will not harm your plants.
11
Page 13
Replace
Bulbs
24-HourLight
Add
Nutrients
Replace
Bulbs
Locking Lever
Basic Reminders About Your AeroGarden (continued)
Raise Lamp Hood (Lights)
As plants grow to 1-2” from lights, raise the Lamp Arm one notch at
a time. Be sure Lamp Arm is set at the lowest setting when you start
your AeroGarden.
1
Unplug Space•Saver 6 and remove Bowl from Base.
2
Hold Lamp Arm where it connects to Lamp Hood with one hand.
With other hand, push in Locking Lever.
3
Release Locking Lever while pulling up on Lamp Arm.
Locking Lever will automatically click into next notch in Lamp Arm.
4
Replace Bowl on Base and plug in Space•Saver 6.
Note: When lowering Lamp Hood, be sure to hold Lamp Arm
to avoid crushing plants.
Replace Grow Bulbs – Order replacement bulbs at www.aerogardensupport.com
When “Replace Bulbs” light on Control Panel begins to
blink after 6 months of use…
• Unplug Space•Saver 6.
• Remove old Grow Bulbs and carefully discard*.
IMPORTANT: To avoid burning, be sure Grow Bulbs are cool before handling.
• Insert new Grow Bulbs into Lamp Hood.
• Plug in Space•Saver 6 and press and release “Reset”
Space•Saver 6 Elite
Control Panel
Early Grow Bulb Replacement
If you replace Grow Bulbs before “Replace Bulbs” light illuminates, be sure to
restart grow bulb timer as follows:
• Press and hold “Lights” button until white light next to your selected plant
type starts blinking – about 5 seconds.
• Release “Lights” button. Plant type selected light will continue to blink for
about 9 seconds. While plant light is still blinking…
• Quickly press and release “Reset” button. “Replace Bulbs” light will blink
once and plant selected light will stop blinking.
button to restart grow bulb timer.
Space•Saver 6
Control Panel
*Check with local recycling authorities for light
bulb recycling availability in your area.
12
Page 14
Prepare For Your Next Garden
Cleaning Instructions for your Space•Saver 6
Use only water and mild soap when cleaning your Space•Saver 6 (except when Sanitizing - Step 6). Do not use
abrasive cleaners or run through the dishwasher.
When your Garden has completed it’s growing cycle…
1
Unplug Space•Saver 6.
2
Carefully remove Bowl and Grow
Surface from Base and bring to
a sink. Set Base and Lamp Hood
aside.
NEVER SUBMERSE BASE AND
CONTROL PANEL IN WATER.
3
Remove Grow Surface from Bowl
and place on a counter near sink.
4
Empty contents of Bowl in sink.
Do not pour water on houseplants. Nutrient mixture may be too concentrated for
them.
5
Remove Seed Pods and plants
from Grow Surface.
• Pull Seed Pods out of Grow Sur-face openings.
• Throw away Seed Pods and plant
debris (plant growth and roots).
If you compost, plant debris can
be composted.
Grow Surface
Plant
Growth
Seed
Pod
Roots
Rinse Bowl and Grow Surface with
7
tap water. Repeat.
Towel dry Bowl and Grow Surface
8
before putting them back together
and setting them on Base.
9
If Grow Bulbs have been in use more
than 6 months, they should be replaced at this time (see page 12).
Your AeroGarden is now ready for
replanting.
13
6
Sanitize Space•Saver 6.
• Fill Bowl ¾ full with water.
• Add ¼ cup (59ml) of chlorine
bleach.
• Let sit for 2 minutes.
• Using sanitizing water, wipe
Grow Surface and Bowl with soft
cloth or sponge.*
*Gloves recommended.
• Scrub underside of Grow
Surface with soft scrub brush to
remove any tangled roots.
• Empty bleach water from Bowl.
Bundle cord when furnishing is not in use.
!
Page 15
Grow Surface
Add
Nutrients
Replace
Bulbs
Replace
Bulbs
24-Hour
Light
Add
Nutrients
Prepare For Your Next Garden(continued)
Replanting Your AeroGarden
If you have already grown a garden in your Space•Saver 6, please follow the instructions below to
reset the nutrient timer:
• Press and HOLD “Reset” button until red “Add Nutrients” light blinks (approximately 6 seconds).
• Release “Reset” button. “Add Nutrients” light will turn off.
• Your Space-Saver 6 is now reset. (In some cases you may see other lights blink as well. This is nothing to worry about.)
Reset
Add Nutrient
More Reminders…
REMOvE BIO-DOMES
When plants appear through the hole in
the Seed Pod Labels, remove Bio-Dome and
discard or recycle.
Reset
Add Nutrient
WATER LEvEL LOW
When indicator is RED, add water to “Fill To Here” below
View Door.
Water level indicator gradually changes from red to green as water is
added. Water level indicator is completely GREEN when Bowl is full.
Water Level Indicator
View Door
14
Page 16
U.S. CAUTION –You are cautioned that any changes or modications not expressly approved in this manual could void your author-
ity to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected; or, Consult the dealer or an experienced radio/TV technician for help.
To reduce the risk of electric shock, this furnishing has a
polarized plug (one blade is wider than the other). This
plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the
proper outlet. Do not change the plug in any way.
CAUTION:TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:POUR ÉVITER UN CHOC ÉLECTRIQUE,
PRÉSENTER LA LAME LARGE À LA FENTE LARGE ET
POUSSER JUSQU’AU FOND.