AeroGarden 100602-SLR, 100603-BSS, 100602-BLK, 100602-WHT, 100340 User Manual
...
Add
Nutrients
Replace
Bulbs
Quick Start
Guide
Simple Steps
To Get Your
English
Up and Growing
Space•Saver 6 Model #s – 100602-BLK; 100602-WHT;
100602-SLR; 100603-BSS
Input Voltage: 120V, 60Hz, 1.5A
KEEP THIS GUIDE !
Date Code:
IMPORTANT SAFETY INSTRUCTIONS
(SAVE THESE INSTRUCTIONS)
When using this AeroGarden Space•Saver 6 electrical furnishing, basic precautions should always be
followed, including the following:
Read all instructions before using this AeroGarden furnishing.
1. To reduce the risk of electric shock, the Space•Saver 6 has a specic plug. Do not change the plug in any way.
DANGER – to reduce risk of electric shock:
2. Always unplug Space•Saver 6 from electrical outlet before cleaning or changing Grow Bulbs (light bulbs).
WARNING –
3. Unplug Space•Saver 6 from outlet before putting on or taking off parts.
4. Close supervision is necessary when Space•Saver 6 is used by or near children, invalids, or disabled persons.
5. Use Space•Saver 6 only for its intended use as described in the instructions. Do not use attachments not recommended by
manufacturer.
6. Never operate Space•Saver 6 if it has a damaged cord or plug, if it is not working properly, if it has been dropped and damaged, or if it has been dropped in water. If any of these conditions occur/exist, contact www.aerogardensupport.com or
your country’s local distributor for instructions.
7. Keep cord away from heated surfaces.
8. Never operate furnishing with air openings blocked. Keep air openings free of lint, hair, and the like.
9. Never drop or insert any object into any electrical openings.
10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
12. Do not touch moving parts or hot parts such as pumps, bulbs, reective surfaces, and the like.
13. To disconnect, remove plug from outlet.
14. Do not place or submerse base, cord, plug, or lamp hood in water or other liquid to clean it.
15. Do not allow water to contact hot light bulbs.
16. Use only approved and supplied parts and accessories. Use only lamp model 100340 (N. America) or 200340 (Europe &
Australia) Grow Bulbs with this Space•Saver 6 model. Use of any other kind of accessory is not recommended. Replacement parts can be ordered from www.aerogardensupport.com or from your retailer.
17. Do not use Space•Saver 6 for other than intended purpose.
18. This product is intended for household and residential use only. This product is not approved for commercial applications.
19. Read and follow all important notices on the Space•Saver 6 and in the accompanying literature.
20. If supply cord is damaged, it must be replaced by manufacturer, its service agent, or similarly qualied technician in order
to avoid a hazard.
21. Electrical wiring must be in accordance with local regulations.
22. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance
by a person responsible for their safety.
23. Children should be supervised to ensure they do not play with the appliance.
to reduce risk of burns, re, electric shock, or injury to persons:
1
SAvE THESE INSTRUCTIONS
Add
Nutrients
Replace
Bulbs
1
Quick Start Assembly (No tools required)
Unpack Your
A
Lamp Hood
(front view)
Lamp Arm
(back view)
Space•Saver 6
Deluxe B
Grow Bulbs (2)
Bowl
B
Insert Lamp Arm
into Base
Push
Lamp Arm
down until
you hear
a “click.”
Lamp Arm
(back view)
Base
(back view)
Base
(front view)
C
Insert Deluxe B Grow Bulbs
into Lamp Hood
Push straight in.
DO NOT TWIST BULBS!
Seed Kit
Lamp Hood
(bottom view)
D
Plug Lamp Cord
into Lamp Hood
Lamp
Cord
Push Lamp Cord
rmly into socket in
Lamp Hood.
Remember to replace Grow Bulbs every 6 months.
Instructions Continued On Next Page
2
Add
Nutrients
Replace
Bulbs
Add
Nutrients
Replace
Bulbs
1
Quick Start Assembly (continued)
Place Lamp Hood
E
on Lamp Arm
Center hands over
Lamp Arm and push
Lamp Hood down until
you hear a “click.”
(back view)
F
Set Bowl into Base
(front view)
Be sure that Bowl is securely seated
on Air Coupling in Base.
Air Coupling
Moving Your
G
Use one hand to
grasp Lamp Arm.
Gently slide your Space•Saver 6 toward the
surface edge and place other hand under Base.
Space•Saver 6
NEED ADDITIONAL HELP?
For supplies and information, visit…
www.aerogardensupport.com
3
Place Your Garden
H
In: A 60-75°F
(16-24°C)
environment
(optimal)
On: A sturdy, watertolerant surface
(Metal surfaces may cause
noise due to vibration)
Under: A space that
allows 22” (56cm)
clearance for the full
height of raised lamp
Near: A standard
electrical outlet, per
local regulations
68°F/20°C
Note: Do not place beneath
under-cabinet lights.
Away From
Reach of children and pets
Direct sources of heat (e.g., stove, furnace vents)
Direct sources of cold air (e.g., window drafts, A/C vents)
For Optimal Tending & Harvesting, Also Consider
Easy access to un-softened water
4
Loading...