AER Compact Mobile Technical sheet

Compact Mobile

Inputs

channel 1 6.3 mm (1/4”) input jack socket as high

channel 2 combined XLR/6.3 mm (1/4”) input jack

Tone Controls

equalizer three band tone controls for channel 1

colour ‘mid-cut-treble-boost’-lter

effect digital effect processor with 4 presets:
1 – 3= reverb and 4= anger.

Power

power amp 60W / 4 ohms, dynamic control

battery type two high–power sealed–acid batteries

Musicians often asked us for a system for acoustic instru­ments that provides AER sound and quality everywhere…
independent from the mains.

This is exactly what the Compact mobile has been de­veloped for. Based on the Compact 60, thus identical in
sound, but with adapted technology and slightly chan­ged dimensions you can play without the mains for three
to four hours. Whether you chose to play in the old town
or on a glacier, the sound is always clear and omnipre­sent.

In case of insufcient battery power the intelligent po­wer control gives a warning and saves you from lack of
power during performance. Moreover it prevents the
batteries from being completely exhausted.

• 60 watts, battery powered

• 8” (200 mm) twin cone speaker

• Twin-channel, 3 and 2 band EQ

• 4 digital effect presets (reverb and anger)

• up to 4 hours performance independent
from the mains

Speaker System

8” (200 mm) twin cone speaker

Features

Aux-in, headphones, line out, DI-out,

Accessories

padded gigbag

optional: special cable to supply power
from cigarette lighter jack

Specications

cabinet 15 mm (0.59”) nnish birch plywood

nish waterbased acrylic, black spatter nish

dimensions 325 mm x 330 mm x 285 mm
(12.80“ x 13.00“ x 11.22“), HxWxD

weight 13,85 kg (30.54 lbs)

acoustic

solutions

standard level

impedance line input stage with pad
(high/low attenuation) and gain control.

socket as high-quality line- or balanced
microphone input stage with switchable
48 V phantom power, gain control

and two band tone controls for channel

2

6V, 12 Ah for
3 – 4 hours of independant perfor­mance. Battery power control

external effect loop via send and return,
footswitch (internal/
external effect on/off)