AER Amp One Technical sheet

It seems like we have done it again…

Over many years you have asked us for something small for
electric bass… simple, powerful and with a performance hard
to believe…

And there it is – the AER Bottom Line Amp one.

Based on a superb 10“ in a bass re ex encolsure, in combina-

tion with a serious 200 watt power amp, more than su cient
power-supply and extended dynamic headroom – not to forget
Paul’s helping hands and ears – it is  nally done.

• single channel bass combo

• 200 watts, dynamic control

• 10“ loudspeaker neodymium magnet

• compressor with adjustable ratio and threshold

• 13,50 kg (29.50 lbs)

b a s s

solutions

amp one

advanced level

Inputs

input 6.3 mm (1/4”) input jack socket as high impedance

line input stage with pad (high/low attenution).

Tone Controls

equalizer three band EQ with parametric mids

colour ‘mid-cut-treble-boost’- lter

bass boost +10 dB / 55 Hz

tone balance the tone balance enables the bass- or treble emphasis
or a combination of both

e ec t compressor with adjustable ratio and threshold

Power

power amp 200 W / 8 ohms, dynamic control

analog signal subsonic  lter, low distortion
processing RMS limiter

Speaker System

10“ woofer neodymium magnet

Features

ground lift, headphone output, line out, sub out,

footswitch (muting and e ect loop), send, return,
insert pre/post EQ, aux in, adjustable DI-out

Accessoiries

padded gigbag

Speci cations

cabinet 18 mm (0.70”)  nnish birch plywood

 nish waterbased acrylic, black spatter  nish

dimensions 325mm x 375 mm x 295 mm

(12.80“ x 14.80“ x 11.60“), HxWxD

weight 13,50 kg (29.50 lbs)

bass

boost

band
width