AEMC 8435 Quick Start Guide



QUICK START

USER GUIDE

8435

PowerPad

®

IMPORTANT WARRANTY NOTE:

By registering online within 30 days from the date of

purchase, your warranty will be extended to 3 years

Shipping Contents:

(1) PowerPad® Model 8435

Cat. #2136.41 or Cat. #2136.42

PRODUCT PACKAGING

(1) Large Classic Tool Bag

Cat. #2133.73

(5) Black Test Leads and Alligator Clips

Also Included:

• 4 GB USB Stick (DataView/User Manual)

• 9.6V NiMh Battery - installed

• 2 GB SD-Card - installed

• High Voltage Warning/Caution Card

Kit (Cat. #2136.42 only) also includes:

• (4) AmpFlex® Model A196-24-BK

Cat. #2140.73

(1) 110V Power Cord

Cat. #5000.63

(12) Color-coded ID Markers

Cat. #2140.45

(1) 5 ft USB Cable

Cat. #2140.46

USB STICK: DataView® software and complete user manual for the Model 8435

can be located on the USB stick supplied with the instrument.

Statement of Compliance

Chauvin Arnoux®, Inc. d.b.a. AEMC® Instruments
certifies that this instrument has been calibrated
using standards and instruments traceable to
international standards.

We guarantee that at the time of shipping your
instrument has met its published specifications.

An NIST traceable certificate may be
requested at the time of purchase, or obtained
by returning the instrument to our repair and
calibration facility, for a nominal charge.

The recommended calibration interval for this
instrument is 12 months and begins on the date of
receipt by the customer. For recalibration, please
use our calibration services. Refer to our repair
and calibration section at www.aemc.com.

Serial #: ________________________________

Catalog #: 2136.41/2136.42

Model #: 8435

Please fill in the appropriate date as indicated:

Date Received: _________________________________

Date Calibration Due:

_______________________

Chauvin Arnoux®, Inc.
d.b.a AEMC® Instruments

www.aemc.com

Thank you for purchasing an AEMC® PowerPad® III Model 8435

For best results from your instrument and for your safety, read the enclosed operating instruc­tions carefully and comply with the precautions for use. These products must be only used by
qualified and trained users.

WARNING, risk of DANGER! The operator must refer to these
instructions whenever this danger symbol appears.

CAUTION! Risk of electric shock. The voltage at the
parts marked with this symbol may be dangerous.

Equipment is protected by double insulation.

USB socket.

SD Card.

Ground/Earth.

Important instructions to read and to fully understand.

Useful information or hint to read.

The CE marking guarantees conformity with European directives and with
regulations covering EMC.

The trash can with a line through it means that in the European Union, the
product must undergo selective disposal for the recycling of electric and
electronic material, in compliance with Directive WEEE 2002/96/EC.

Definition of Measurement Categories (CAT)

CAT IV Measurement category IV corresponds to measurements taken at the source of low-

voltage installations.
Example: power feeders, counters and protection devices.

CAT III Measurement category III corresponds to measurements on building installations.

Example: distribution panel, circuit-breakers, machines or xed industrial devices.

CAT II Measurement category II corresponds to measurements taken on circuits directly

connected to low-voltage installations.
Example: power supply to domestic electrical appliances and portable tools.