Page 1
Special
product
features
▼
H
D
E
N
A
H
O
H
G
M
E
M
E
U
R
T
T
E
S
T
T
E
L
B
A
T
C
E
L
S
E
S
MEGOHMMETERS
Digital/Analog & Multi-Function Handheld
L
D
Models 6522, 6524, 6526, 6532, 6534 & 6536
M
E
T
E
R
V
O
L
T
A
G
E
SPECIFICATIONS
MODELS 6522 6524 6526 6532 6534 6536
INSULATION TESTS
Test Voltages
Insulation Resistance
PI/DAR Ratios
Test Lock
Timer
Auto Discharge
Automatic Test Inhibit
DMM FUNCTIONS
Voltage
Resistance
Continuity
Test Current
Capacitance Measurement
Frequency
GENERAL FUNCTIONS
Alarm
∆ Rel
Auto Power OFF
Data Hold
Test Lead Compensation
Remote Probe
Memory
Bluetooth
®
DataView
Display Type
Display Counts
Backlight
Safety
Power Supply
Protection
Magnetic Mount
Additional Features
Applications
Software
250V, 500V, 1000V
40GΩ
(40000MΩ)
– Yes Yes Yes – –
Yes Yes Yes Yes Yes Yes
0 to 40min 0 to 40min 0 to 40min 0 to 40min 0 to 40min 0 to 40min
Yes Yes Yes Yes Yes Yes
>25V >25V >25V >25V >25V >25V
700Vac/dc 700Vac/dc 700Vac/dc 700Vac/dc 700Vac/dc 700Vac/dc
– 1000kΩ 1000kΩ 1000kΩ 1000kΩ 1000kΩ
10Ω 10Ω, 100Ω 10Ω, 100Ω 10Ω, 100Ω 10Ω, 100Ω 10Ω, 100Ω
200mA/20mA 200mA/20mA 200mA/20mA 200mA/20mA 200mA/20mA 200mA/20mA
– – 0.1n to 10µF 0.1n to 10µF – –
– 15.3 to 800Hz 15.3 to 800Hz 15.3 to 800Hz – –
– Yes Yes Yes Yes Yes
– Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes Yes
Yes Yes Yes Yes Yes Yes
Yes (optional) Yes (optional) Yes (optional) Yes (optional) Yes (optional) Yes (optional)
– 300 measurements 1300 measurements 1300 measurements 1300 measurements –
– – 2.1 Class II 2.1 Class II 2.1 Class II –
– – Included Included Included –
Digital w/Analog
Bargraph
4000 4000 4000 4000 4000 4000
Yes Yes Yes Yes Yes Yes
600V CAT IV 600V CAT IV 600V CAT IV 600V CAT IV 600V CAT IV 600V CAT IV
6 x AA Alkaline 6 x AA Alkaline 6 x AA Alkaline 6 x AA Alkaline 6 x AA Alkaline 6 x AA Alkaline
IP 54/IK 04 IP 54/IK 04 IP 54/IK 04 IP 54/IK 04 IP 54/IK 04 IP 54/IK 04
Yes Yes Yes Yes Yes Yes
– –
Industrial
Maintenance
50V, 100V, 250V,
500V, 1000V
200GΩ
(200000MΩ)
Digital w/Analog
Bargraph
Industrial
Maintenance
50V, 100V, 250V,
500V, 1000V
200GΩ
(200000MΩ)
Digital w/Analog
Bargraph
Green/Red
Pass/Fail Indicator
Industrial
Maintenance
50V, 100V
20GΩ
(20000MΩ)
Digital w/Analog
Bargraph
10V, 25V, 100V,
250V, 500V
50GΩ
(50000MΩ)
Digital w/Analog
Bargraph
Cable length
measurement
(0 to 100km)
Telecom Electronics, ESD
Variable 10 to 100V
(1V steps)
20GΩ
(20000MΩ)
Digital w/Analog
Bargraph
– –
Avionics, Space,
Defense
CATALOG NO. DESCRIPTION
2155.51 Megohmmeter Model 6522 (Digital w/Analog Bargraph, 250V, 500V, 1000V, Ohm, Continuity, V)
2155.52
2155.53
2155.54
2155.55
2155.56 Megohmmeter Model 6536 (Digital w/Analog Bargraph, Alarm, Variable 10V to 100V, Ohm, Continuity, V, kΩ)
www.aemc.com
Megohmmeter Model 6524 (Digital w/Analog Bargraph, Alarm, 50V, 100V, 250V, 500V, 1000V,
Ohm, Continuity, V, kΩ, Mem)
Megohmmeter Model 6526 (Digital w/Analog Bargraph, Alarm, 50V, 100V, 250V, 500V, 1000V,
Ohm, Continuity, V, kΩ, Cap, Mem, Bluetooth w/DataView
Megohmmeter Model 6532 (Digital w/Analog Bargraph, Alarm, 50V, 100V,
Ohm, Continuity, V, kΩ, Cap, Mem, Bluetooth w/DataView
Megohmmeter Model 6534 (Digital w/Analog Bargraph, Alarm, 10V, 25V, 100V, 250V, 500V,
Ohm, Continuity, V, kΩ, Mem, Bluetooth w/DataView
®
®
®
software)
software)
software)
Technical Assistance (800) 343-1391
Page 2
Models 6522, 6524, 6526, 6532, 6534 & 6536
Front Panel & Functional Displays
Analog with
bargraph display
of insulation
resistance
Secondary display
Main display
Function
indicators
IP
54
Rated
KEY FEATURES*
• True Megohmmeter
• Test voltage from 10V to 1000V
• Insulation resistance up to 200GΩ
• Manual, Lock, Timer modes &
PI/DAR Ratio calculations
• Alarms with Green/Red Pass/Fail indicator light
• 200mA/20mA continuity with active
protection without fuses
• Measurement of V (TRMS & DC), F, Ω, kΩ,
Hz, C and cable length
• ∆Rel mode for comparison measurements
• Configurable alarms
• Data Storage
• Automatic discharge after test
• Automatic test inhibit if device under
test is energized >25V
* Features are model dependent
®
Access to
the instrument
information
and setup for
Test Lock, Timer,
PI/DAR and Times
Navigation buttons:
• Display instrument
information
• Turn buzzer
on or off
• Turn power
saver on or off
• Program test time
• Select displayed
parameters
measurements to
a reference value
• Program alarm
set points
Memory recall/
Bluetooth activation
Alarm activation/
deactivation with
Pass/Fail indication
(model dependent)
selection switch
Data Analysis and Reporting Software
Configure all functions of the Megohmmeter
Models 6526, 6532 & 6534
• Print reports of all test results
• Select test voltage and run tests from
your computer with a simple click and
execute process
• Capture and display data in real-time
Test lead
resistance
compensation
∆Rel set and
compare
Test button
Test function
Models 6522 & 6524
Soft carrying pouch, two 1.5m test leads (red/black), two alligator
clips (red/black), 1 black test probe, 6 AA batteries and user manual.
Model 6536
Soft carrying pouch, two 1.5m test leads (red/black), two alligator
clips (red/black), 1 black test probe, two "grip" probes (red/black),
6 AA batteries and user manual.
Technical Assistance (800) 343-1391
PRODUCT INCLUDES
Models 6526, 6532 & 6534
Soft carrying pouch, two 1.5m test leads
(red/black), two alligator clips (red/black),
1 black test probe, two "grip" probes
(red/black) (Models 6532 & 6534), 6 AA
batteries, quick start guide, and a USB stick
with DataView
®
software and user manual.
www.aemc.com
Page 3
DATAVIEW®
Software for Megohmmeters
Data Analysis and Reporting Software
Configure all functions of the Megohmmeter
Models 1060, 5060, 5070, 6526, 6532, 6534, 6550 & 6555
• Print reports of all test results
• Select test voltage and run tests from
your computer with a simple click and
execute process
• Capture and display data in real-time
• Retrieve data from the instrument’s
memory for:
• Over 1500 insulation resistance
measurements
• Over 4000 resistance measurements
Typical DataView® Functional Displays
Four tabbed dialog boxes allow for clear and easy setup
of all functions of the Model 5070, including setup for
variable voltage and alarm set points, as well as step
voltage tests and temperature compensation.
Variable Voltage selections from 40 to 5100V and can
also be programmed along with alarm set points.
• Display DAR and PI ratios
• Plot graphs of manual and timed tests
• Include your analysis comments section
with the report
• Store a library of setups for different
applications
• Certification of results through report
generation
• Free updates are available on our website
www.aemc.com
Model 5070 includes Ramp Function which allows
programming of three different ramp test profiles,
each containing up to five voltage steps between
40 and 5100V and time per step of up to 10 hours.
Test result status box
displays complete test
results in real-time
www.aemc.com
Step voltage during
the test run
Insulation resistance
with temperature
compensation
Run test and display text and graphical results from one dialog box.
Model 5070 also displays step voltage.
Technical Assistance (800) 343-1391
Loading...